This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Taco
About
- Username
- Taco
- Joined
- Visits
- 246
- Last Active
- Roles
- Member
Comments
-
@Jerryvdv Could you reproduce the error and send a log?
-
See 3. Snelle Start
-
I can't find the supported command classes of the wall controller but with a quick search I found the actuators support the Multilevel Switch command class. Devices supporting the Multilevel Switch command class can be controlled with Homey.
-
Only motion and tamper are send through the notification command class. Temperature and luminance use the multilevel sensor command class by default.
-
@JanH It is possible the sensor is added unsecure. This happens when something unexpected happens during the secure inclusion. When this happens you get a popup in the pairing wizard.
-
The secure checkbox is a read only setting. It shows you whether your device is included securely or not. You only get the question which association should be made for non Z-Wave Plus devices. For Z-Wave Plus devices always an lifeline association …
-
It's up to the manufacturer when the device notifies Homey through the association group. I suppose it doesn't report when it is controlled by another Z-Wave node. When you open the device card (of a non battery device) Homey fetches the state and …
-
I only see 4 and 5 in the logs.
-
What is the node id of the sensor?
-
I think the alarm (motion or tamper) was active during the interview so the device is added with the alarm set to true. It will be set back to false if the sensor sends a report indication the motion or tamper alarm is false. Also when the device wa…
-
After inclusion Homey will ask for a welcome message from alle device in the network. Devices that are awake will answer and Homey will try to add those devices. This progress happens in the background. If the interview fails no device will be added…
-
Sounds like the sensor hasn't been woken up after you've saved the settings. Battery devices only wake up after a given (long) interval and then the settings are applied to your device. You can manually wake up the device by button bashing the B but…
-
The SIS id has little nothing to do with security. The SIS is the node id server in the network which is by default Homey
-
The Z-Wave chip we're using.
-
I saw an error where the pairing failed on the same command during pairing in multiple logs, so I'm investigating that. Besides that the causes are mostly an generic transmission errors from the chip. At the moment the best advice I can give is hold…
-
@ThijsDeJong Could you please send us your system log after the pairing hangs, and place the given code here?
-
A device supporting a command class secure doesn't always mean it isn't available non-secure.A device may however implement a command class only securely but that doesn't seems to be the case with this particular device. Secure support seems an extr…
-
Do you have the correct association set? You can edit the device name from the pairing wizard also.
-
Seen it and reopened. Sorry I've missed your previous comment on the issue.
-
@mruiter If I have closed an issue but it still doesn't work on the given version, just comment on the issue and I'll reopen it. I close issues if I've fixed the cause as I see them in the logs. It is possible a different bug gives the same result m…
-
Homey does support Z-Wave security. Please try again with your device close to Homey. If you're still unable to finish the pair wizard successfully pease send us the log usung Settings -> System -> Send Log and past the code here.
-
I don't recommend including Homey in another network because that might disable network features in Homey that aren't present in the primary controller of your other network. After you've included Homey in the other network, does the dropdown fill …
-
Working very hard to get it more stable. When I test it at the office everything work fine but in the field there are a lot more variables. The logs are very helpful to identify use cases that fail. Most errors I encounter in the logs are devices no…
-
Adding it secure or non secure shouldn't matter. Only the interview time will be shorter non secure. Preform the pairing with the device close to Homey. This minimizes the chance on dropped frames. If you're still unable to add the device please po…
-
Custom configuration for devices for a better OOTB experience is definitely something an app will take care of. Zwave Plus introduced the lifeline association group, so you don't have to manually make an association and look up with which group.
-
Could you post the console output of your browser when opening the device card of the second endpoint.
-
Does the device card shows humidity? Or is it just not updating?
-
The humidity capability wasn't correctly assigned to devices by the driver due a bug in the Sensor Multilevel command class implementation. This affected all devices supporting the Sensor Multilevel Humidity sensor. I've tested this with a Aeotec Mu…
-
We're planning to support the Central Scheme command class in the future. If your remote supports that command class it should be compatible.
-
Peao said: Taco said: @Peao Nothing has changed in the interview. If the lock is added non-secure, something during the key transfer went wrong and Homey has to abort secure inclusion. The Danalock only supports the door command secure…