This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Franq

Browser used: chrome Homey apps: ELRO, Calendar to voice. Modules: Fibaro dimmer 2, 3 ELRO socket switches

About

Username
Franq
Joined
Visits
47
Last Active
Roles
Member

Comments

  • Veldkornet said: Franq said:  Someone who lives near Leiden? Where I can update my fibaro dimmers? You could give this a try. Also, does anyone know if it's possible to add a Fibaro Home Center 2 / Lite to the existing Homey Z-…
  • WRos said: I'm using the DB201T as sender. And the DB200 as receiver. I couldn't connect to homey. Do u use the same components? The receiver can play 16 types of noise. I can make up a lot of usefull flows. Is there a way to connect thi…
  • Is it possible to connect to homey using only this (https://ledstrip-specialist.nl/image/cache/data/nieuwe-controller-milight-rgbww-800x800_0.png) milight controller? Or do you need also this one? https://images-na.ssl-images-amazon.com/images/I/41r…
  •  Someone who lives near Leiden? Where I can update my fibaro dimmers?
  • Jerryvdv said: Neo Coolcam - plug 20,55  http://www.everbuying.net/product1224431.html Also other components available.. Thx ordered 3.
  • @caseda D*mm*t I missed that one... Thx.
  • Let me first say that I am a very happy user of Homey. I like it and a lot of things are working. Thanks for that Athom. Lately I am experiencing some strange behavior (at least in my opinion). I'm on v1.2 RC 10. If a say something to homey like 'w…
  • maartenverbunt said: I would love to see an extra option in the flow options for the Fibaro Dimmer 2. Now I can set the brightness level with a slider, but it would be awesome if it were possible to use a value tag as well. And also an option t…
  • Anyone experiencing more trouble with speech since the 1.x versions? Seems that homey isn't listening that good as before.
  • When I want to add a new sensative strip I get the message: invalid_driver Before it was working good. Is there a work around? Did already a reboot, reinstall of sensative app. (running both the latest version). Edit: Never mind: https://github.com…
  • @ErikB  [quote]Hai Franq  dat is redelijk normaal omdat fibaro dimmer software matig reageert op de belasting die er aan hangt .(dit om overbelasting te ver komen) de oplossing zou zijn om de dimmer even van het 220 lichtnet te halen even wachten en…
  • Aljoen said: Had the same. Filling in the parameter 1 to 0 (1,1,0) in raw configuration parameters did the trick. caseda said: this is what the manual says: Wake up Strips manually for Z-Wave communication. Place the round magn…
  • T-mo-T said: msmits said: JaapPelt said: fiek said: @superice ..It's been a while since the last update of the app :)Can we expect an improved presence detection? I tested the presence detection yesterday. It s…
  • caseda said: .... soon it will be possible to update modules with homey That would be great! Currently my homey is running very stable. And speach-reg is working better then ever!
  • scocz said: It would be nice to know what kind of setup and devices everyone has. I just found some cheap motion sensor and wall plugs (like fibaro, except half the price) on alibaba.  What kind of setup and devices do you have at home? …
  • msmits said: @Franq; Ive checked everything..  -Battery saving settings -Wifi always on when device sleeps -Enabled Development settings and checked agressive switch to cellular when wifi strength is poor. - Task/RAM cleaner disabled  Nothin…
  • msmits said: JaapPelt said: fiek said: @superice ..It's been a while since the last update of the app :)Can we expect an improved presence detection? I tested the presence detection yesterday. It seemed fine most of the…
  • caseda said: @Franq try to change the value to low (like 50, just not below the minimal value) save and then put it to max again (99) and save, see if it still does weird things you might need to re-add the dimmer to homey if it still is act…
  • caseda said: @Franq  just tested it and its working properly here, what version of the app are you on? and what version of homey? Latest homey version 0.10.3 and fibaro 1.0.16
  • I have a fibaro dimmer 2 (witch dims 3 halogen spots) and cannot save max dim level to 99 or 100. Because if I do save it to 99 and switch the dimmer on it automatically switches off again. Somebody gets also this behavior?
  • Hello, I have been lurking this thread for a long time. I like my homey and want to thank the team for all the good work. You asked (@superice) to give some feedback at the locationing (home / not home). It works partly at my Samsung Galaxy S7, lat…
  • elco@outlook.com said: Hi Athom, I love Homey and have only few regrets of over buying it. But I'm getting a little bit freaked out every update seems to be worse than the previous version. I know, it's a beta product, but at this time it seem…
  • posthok said: Your not the only one. There's something wrong with the mail settings. I know that you already have a work around  (lowering the security) but doesn't this has to do with the app-password from Google?  Just search on 'app …
  • I like the looks of invited. But it's a pitty that it comes with its own cilinder. Is there no work around? (A)
    in Nuki doorlock Comment by Franq May 2016
  • Is there is a list of build in commands? 
  • jorden said: The home/away status from the app is not working currently, as far as I know. In a future version they will try other ways to do that, the old way didn't work too well. Oke fine. I will wait then. 
  • Does this still works with you guys in 0.8.35? I created a flow (see image) and it doenst trigger.
  • I had also troubles but managed to add it after full factory reset (2 times)
  • ErwinVrieze said: As long as I can add those devices, but can not add them in a flow .... no more for me.... ) in the flow screen they are just not visible (only  the remote... ) same goes for Elro switches ... I have the elro socket swi…
  • wingie said: Franq said: The link is not working But thx! Just a little bit self effort https://apps.athom.com/app/nl.action I already found the link by myself, but wanted you to know that it wasnt working so you could c…