This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Overlord
About
- Username
- Overlord
- Joined
- Visits
- 70
- Last Active
- Roles
- Member
Comments
-
MarcelTimmermans said: I used an arduino board with a little bit of hardware and made software for it that push every 5 minutes all the values (so the telegram decoding is done on the arduino board) to my Synology NAS. This is always on. Now I …
-
Ok, I've got my EvoHome installed today, so let me know if you want me to help test new versions! And is it possible to ask for a temperature and let home say it is <$evohome installed thermostat> degrees or graden. So is it possible to use a…
-
after updating to 10.1 I've lost 2 of my flows? and in 4 days Homey gave me 2 false positives on listening. And stays lisening till a reboot or disable microphone and enable microphone. and due to klikaanklikuit update I had to reset all my switches…
-
@Kosmonout imho, when Kodi is shutdown, there is no process listning on port 9090 for the reboot command. So just try to use the reboot if you want to refresh kodi.
-
@EvertorN That's it, I was assuming when you said that port 9090 was needed you had to change http on Kodi to 9090. Now I have a connection! this evening I will play with it
-
@Phuturist The problem is that I can't get to connect to my Kodi install. and that is the continuing story with all the versions sofar! Even after a clean install of my system with a defaultKodi
-
@EvertorN Still in pursuit of trying to connect Homey to my Kodi install. I'm running the 1.4.0 from the zip, but i'm wondering where I can find the logging you mentioned earlier, that you build in. On screen there's not that much, and can't find it…
-
@EvertorN ; is there a small user guide for wich settings you minimal need in Kodi to have, to work with the app? Would also be helpfull for New users I still have problems, even after installing my pc freshly and only Kodi on it. Still getting err…
-
EvertorN said: @overlord or just mention the episodes and movies that are added that day So that is a config thing then. User can choose how the app present the newly added content?
-
EvertorN said: @Everyone: I am also working on a brand new (and more user friendly) speech interface where Homey will talk back if it doesn't understand you etc. I am also planning on writing some Kodi Q&A functionality, where you can a…
-
EvertorN said: Overlord said: @EvertorN Do you have any ideas why the kodi app won't connect to my Kodi? Everything is in place for it, no firewall etc. can control Kodi via remote and web on port 9090 but Homey still gives the same e…
-
@EvertorN Do you have any ideas why the kodi app won't connect to my Kodi? Everything is in place for it, no firewall etc. can control Kodi via remote and web on port 9090 but Homey still gives the same error "unexpected server response (200)" Is t…
-
but still not connecting to my Kodi. unexpected server response (200) firewall and all are off. Kodi running on the same system as I use to manage (and run the Kodi app) on my Homey Anyone an idea?
-
that worked like a charm! still the deprecated error for gracefull, but I'm now logged in! THANX!
-
thanx, going to install 4.4.2 and try again. maybe something to put into the 'getting started' part?
-
BasVanDenBosch said: What was the error when you did : npm install -g athom-cli @BasVanDenBosch opend a new discussion so not to pollute this thread. https://forum.athom.com/discussion/1403/error-after-following-getting-started-with…
-
RobinVanKekem said: Download the zip with the sources from here: https://github.com/MarvinSchenkel/HomeyKodi Follow these instructions for installation requirements: https://developers.athom.com/library/getting-started/ tried to install …
-
EvertorN said: Pushed v1.1.2 to Git. The app now automatically tries to reconnect when the connection to a Kodi device has been lost (e.g. Shutdown or a reboot of Kodi). No need for a Homey reboot anymore :-). Any tech peeps wanna test this be…
-
Yep, been there, done that, got the headache tried KOdi version 15, 16 and 17 but nothing works, that is for Homey/Kodi
-
Is someone experiencing problems with the install of Kodi 1.1.1 on firmware 8.32? Install from app shop went well, but when configuring Kodi as device in my livingroom i cant connect to my Kodi install. Kodi is running on the same PC I use to config…
-
Still having problems with loading of Kodi app. (not working) is this going to be addressed in version 8.31?
-
Just had the mail, shipping date 18 th april so going to order a LC-13 and Honeywell valve. Have to see if I have to change the adapter on mij system. Found the Fibaro motionsensor. Great was looking for some kind of combined sensor. Thanx again
-
Thanx! I'm sorry, still waiting for my Homey. But the LC-13 and/or Honeywell valves are in the picture to regulate my temperature in every room. So very interested whats going on. When received I will join the conversation with some more detail
-
Factory reset of the....... LC-13 or the Homey??
-
Still waiting, but confident in delivery ;-)
-
@Taco nice, going to experiment with 2 valves. One from Danfoss and one from Honeywell. First have to wait for my Homey ofcourse
-
+1 Danfoss and Honeywell both deliver zonebased control centers. Who can act independently from Homey or other domoticacenters. I favor the Danfoss Zwave radiator knobs. And like to install then with motion sensors in every room. So you can write…
-
The Böse mini soundlink connecte automaticly after pushend the power button :-)
-
Emile said: I got this one: http://nl.aliexpress.com/item/Wireless-RF-Touch-Panel-LED-RGB-Dimmer-Remote-Controller-For-RGB-LED-Strip-30M-Effective-Distance/664799474.html?ws_ab_test=searchweb201556_2_79_78_77_80_61,searchweb201644_0,searchweb2015…
-
kimror said: @overlord: I think your answer is about four posts above yours.. Only half, but I'll see what they release in the software. @Emile - is there a way of getting the software so we can experiment with it?