This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

HarmLutjeboer

About

Username
HarmLutjeboer
Joined
Visits
739
Last Active
Roles
Member

Comments

  • Veldkornet said: Is it just me, or does everyone else also (Still) lose connectivity and have to re-install the app every time? Same problem here. It works fine for a couple of days and then connection is lost between homey and the Too…
  • It should be possible with the hue app on your phone.... If you install iConnectHue app from the appstore/playstore on your phone. You can connect the hue bridge to your phone (same as the philips hue app) in this app you add/delete action for ever…
  • Dit komt het dichts in de buurt, 4in 10 out. Er is alleen (nog) geen Homey app voor.  https://www.robbshop.nl/din-rail-module-logichomecontrol
  • Ik heb inderdaad gebruikt gemaakt van een Fibaro binaire sensor voor de koppeling met Homey. Helaas heb je op deze manier 2 inputs voor homey. 1e input is de bel knop, en de 2e input is de vrijgave vanuit het paneel. Vrijgave gebeurd door de code in…
  • K2000 keypad op ali! Zelf gebruik ik een andere bij de voordeur.  Dit in combinatie met een voeding met backup batterij. Dit alles in aangesloten op een elektrische deurdranger (gewoon omdat het kan). In het kozijn heb ik een strike-lock geplaatst …
  • David said: Hi, I've had a Homey for a while now and this small thing has been bugging me more and more, so I thought I'd ask if others have had the same issue. I have a kaku switch (AWMR-210 inbouw-dimmer) that will switch on/off the lights wh…
  • @Chico Ook hier geen ICTer. Praktijk instructeur Electro en Mechatronica op het MBO, 28 jaar oud en een huurwoning (zonder zwembad). Ik heb in mijn huis een aantal dingetjes geautomatiseerd. Uiteraard wel zo gedaan dat nagenoeg alles weer in origine…
  • As far as I know it is not possible to have a trigger card that fires when the light is unreachable. It would be a good idea to update the app with this function. But for now... not possible I gues. I replaced al the wall-switches by a blind-cap an…
  • Op dit moment is het niet mogelijk om meerdere triggers in een flow te gebruiken, dus inderdaad voor elke trigger een flow maken die vervolgens weer een flow kan triggeren die je voor meerdere triggers zou willen gebruiken. Wellicht dat dit in een l…
  • Eternity said: This flow switches on my lights *IF* someone is home: If nobody is home, the ANDERS (=ELSE) function is activated.  There I have an action card to switch off the lights after a delay of 60 minutes. However, it seems that this…
  • Chico said: Bedankt voor de inspiratie. Je hebt dus een flow gemaakt wat er moet gebeuren bij brand en wat er moet gebeuren als het over is, en die flow heb je in de rookmelder gezet als flow in een flow. Klopt dat? Ik had er zelf nog niet a…
  • @Chico; Ik gebruik 4 Fibaro Smoke Sensors in mijn huis en dat werkt erg goed. De standaard instelling hoef je niet te veranderen, dit werkt prima met de instellingen die er standaard in staan. Je dient voor elke rookmelder een aparte flow te maken,…
  • baboonen said: Thanks Harm for the update. Unfortunately Hue doesn't appear on my phone, while the connection with the Hue bridge has ben set.  Thanks Richard. Will take a look at it Regards Bobby You're welcome!  Nice that is works n…
  • You can the app to control your Hue lights. However, I prefer using the Hue app to control my hue light. I use Homey to automate some light like turning the light on when it gets dark, turn on light in the hallway when some is ringing the doorbell, …
  • I had some problems with my fibaro smoke sensors, so I decided to remove them all, reset them and then adding them again. However, this wasn't possible. When I tried to add them I get a message "beveiligingssleutel worden uitgewisseld", and thats wh…
  • That would be cool to log activity on homey that way. I use the app "Simple log" to log some actions and status from some sensors and divices. You cas use the date and time tag to add a time and date to the log. It is quite a job to add this, but i…
  • De polling-time is niet aan te passen in de standaard Hue app. Misschien dat iemand met wat programmer ervaring (daar hoor ik zelf dus niet bij) een oplossing weet op dit aan te passen. Maar zoals @Rocodamelshe al gemeld heeft is dat geen verstandig…
  • Het probleem zit hem in de Hue bridge. Ik heb in huis ruim 10 Hue dimmer switches aan de muur geplakt en dit werkt perfect met de hue lampen. Uiteraard alles aangestuurd via de hue bridge. Helaas is de hue bridge niet in staat om inkomende signalen…
  • @Tidus_X https://forum.athom.com/discussion/3131/meerdere-gebruikers-geo-fencing#latest
  • basd said: I like the homey very much i am migrating from a vera light (witch was to light:-) ) What i am missing is modes for in my case.  I have motion detectors in some rooms and i want that the lights go on when i come in the room.  But no…
  • RichardR said: Hier ook alles  vervangen door Ubiquity UniFi, gateway, switches en 2 AP's UniFi AP-AC-LR long range en met roming nu overal van de tuin tot 2e verdieping vol wifi. En met de UniFi Controler Software alles mooi overzichtelijk in…
  • Repeaters zijn heel vaak probleem dingen. Vaak is het "doorgezonden" heel zwak en de data snelheid is vaak laag. Ook merk ik vaak dat het signaal, onverklaarbaar, wegvalt. Er zijn natuurlijk uitzonderingen hierop, maar op veel plaatsen waar ik kom w…
  • GerritKool said: Hoi Harm, dank je voor deze uitgebreide uitleg, ik heb al jou aangedragen oplossingen uitgevoerd dus ik heb er geen gras over laten groeien, wat de oorzaak precies was weet ik niet maar het belangrijkste is het werkt weer, wat …
  • Ik heb zelf 4 Fibaro Smoke Sensor z-wave plus. Die werken (na de laatste update van de app) perfect. Deze zijn alleen te verkrijgen op batterij voeding. Nest Protect heeft zoals gezegd een batterij gevoed model als ook een 230 volt gevoed model. De…
  • De Homey-app werkt niet altijd even goed moet ik zeggen. Soms gaat het een paar week goed en dan lijkt het of 1 van beide telefoons niet meer een aanwezig of afwezig status krijgt. Dit gebeurd bij ons nog wel eens. Optie 1: Op de telefoon (die het …
  • I've already got the solution to the problem. I tried to add a new lamp to my system, after finding my you bridge homey ask to push the button on the bridge. Then it reconnect again to bridge and all of the light are there again. Also all my flow do…
  • https://forum.athom.com/discussion/2929/eaton-xcomfort-wireless-switch-csau-01-02#latest
  • rtna said: HarmLutjeboer said: It should be fixt in update V1.4.3   https://apps.athom.com/app/com.fibaro I gonna test it soon. Should I add the smoke sensors again when the update is installed?  I had installed two sensors …
  • Today I received another two smoke sensors from Fibaro. I installed them and of course tested them. The trigger card "de rookmelder gaat aan" seems to work fine now. The flow that I made did trigger as aspected. Also the card "de rookmelder gaat uit…
  • It should be fixt in update V1.4.3   https://apps.athom.com/app/com.fibaro I gonna test it soon.