This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

canedje

About

Username
canedje
Joined
Visits
920
Last Active
Roles
Member

Comments

  • ZperX said: Modbreak: Comment has been removed due to being off-topic ??? off-topic?
  • JPe said: @caseda  Hi, I have a couple of Fibaro FGS221 (2-relay switch) but the problem is that Homey doesn't show the status ON/OFF in Devices and doesn't react on the status changes in flows when they are switched by the connected push-butto…
  • PetervdK said: rickp said: I think everyone feels the pc/browser option should at least stay  +1 Eternity said: Hey @lubbertkramer You work your butt off, as a moderator...and that's highly appreciated! Just saying  …
  • Reemster said: @canedje Ik ga niet uit van wat Robbshop zegt over compatibiliteit. Heb genoeg dingen besteld daar waar stond dat het niet compatible was met Homey terwijl dit wel het geval was. Want dan zou dit product ook niet compatible zijn …
  • Reemster said: KIJK! daar had ik dus zelf nooit opgekomen, bedankt! nou vroeg ik me alleen af of deze ook zal werken? https://www.robbshop.nl/energiemeter-hem3-60a-z-wave-plus-aeonlabs?gclid=EAIaIQobChMIktrkmoOB2wIVEvEbCh3tTg3FEAQYASABEgLv3fD_B…
  • I realy hate the idea. I'm only using the desktop version for creating flows etc. The overview is much nicer en works fine because of the bigger screen. I can not imagine that developping flows etc. also is workable on a small device as my Phone.. I…
  • jjtbsomhorst said: Als je een flow maakt als:  ring gaat af > en dan zet een textuele waarde. waarbij de waarde de waarde is van de tag van de stand van de lamp en de naam van het veriabel iets dat je weet  vervolgens zet je de lamp op rood…
  • maurice_ot said: Is that Tado presence detection also usable without having the Tado itself ? So just use the software in Homey and on you're phone ? Good question. Athom prommised to improve their presence at the update of the mobile ap…
  • glijie said: login and disable the flow, maybe? Will this stop an already running flow?
  • Ria_Banis said: Dank voor alle reacties. Hier een tijd niet geweest (druk met huis). Nu gisteren een Homey aangeschaft en druk aan het puzzelen. Ik nijg naar de Fibaro. Koolmonoxide niet nodig (stadsverwarming).  Hier dezelfde situatie. …
    in Rookmelder Comment by canedje March 2018
  • Id o have the same question. I learned already you can use the MSQTT app. I only didn't figure out yet how to use it with the RPI
  • I do have a "Hate Love" relation with Homey. I love the posibilitys to use all types of domotica standards and userinterface to create flows. I hate the unreliability. It looks like everyday Homey is acting difference without changing anything. Afte…
  • It is a single switch so only S1 is switching fysical. S2 is only usable for a scene you need to programm in Homey, as far as I know. In case you have a double switch S2 is not working properly in combination with Homey copied from the manual: NOTE…
  • glijie said: wat gaat er fout? Dat het licht uitgaat als ik nog in de garage ben en er beweging is. Rocodamelshe said: Dat er te moeilijk over gedaan word. Bij motion——stop timer en licht aan Bij geen motion meer——-start t…
  • Het gaat nog steeds fout nadat ik de flows heb aangepast. Ik plaats ze hier en ben benieuwd wat ik fout doe. Graag commentaar op mijn flows. Het verschil met Glijie is dat ik bij het aangaan van de PIR niet op een lopende timer check maar of het lic…
  • Charley said: I installed 1.5.8 a couple of days ago.  My findings so far : Z-wave seems to be more reliable, but not really faster.  Since the update, Homey reboots spontaneously at least once a day.  The first two days it was during the night…
  • Ja ik had hetzelfde na de laatste update en heb alle waarden opnieuw moeten invullen
  • Ik heb ze omgebouwd. Dat was nog een best klusje . Ben benieuwd. Wat mij verbaasd bij het stopzetten van de timer dat deze naar -1 gaat. Ik zou verwachten dat de laatste waarde zou bevriezen?
  • Rocodamelshe said: Mag ik ff tussendoor vragen hoeveel apparaten bij jullie de "mesh" verzorgen? Dus hoeveel niet-batterij gevoede Zwave apparaten? Ik heb 7 PIRS (1 fibaro, 5 NEO, 1 Philio) 3 rookmelders 10 Neo coolcam pluggen (mesh+) 5 …
  • glijie said: canedje said: Ik herken deze discussie Ik heb dezelfde problemen. Regelmatig gaat het licht uit op de timer, terwijl er wel beweging is. (PIR flits rood op) Die komt dan blijkbaar niet over bij Homey, of de betreffende fl…
  • It is checking every 10 seconds for log. You are looking at the wrong spot, you need to check by devices at each person by the wringe. For me the "afwezigheidsvertraging" is about 10 minutes (600 sec)
  • Because the app is only checking after a while
  • I don’t know how fast you checked after switching of WiFi . it takes about 10 minutes to be not present anymore
  • Ik herken deze discussie Ik heb dezelfde problemen. Regelmatig gaat het licht uit op de timer, terwijl er wel beweging is. (PIR flits rood op) Die komt dan blijkbaar niet over bij Homey, of de betreffende flow wordt niet geactiveerd. Dan duurt het …
  • I do have it running using the standard logic instead of better Logic. It looks like better logic is not working. The trigger flow for sunrise: The trigger card "vogeltrigger" is the time delaying card triggering the step flow I do use the same v…
  • I do use 5% steps. The strange part is that going up it works sometimes! I do not think the Fibaro RGWB has this restriction: I'm more and more convinced that the slider and vars not working properly together. It looks like a bug. I did use  first …
  •  I tried it again with the right card to use the timer as mentioned in the edited message above. Now the flow is running smoothly. I can see the variable changing in the steps I want at the tags menu. But it looks like that RGBW device is not pic…
  • I tried this concept. But stil not working. Not all steps are accepted bij the RGBW device and missing some steps. Also running this flow is giving delays to other flows. Beside that the check on 0 is mist by the flow and it is going on below until …