This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
canedje
About
- Username
- canedje
- Joined
- Visits
- 920
- Last Active
- Roles
- Member
Comments
-
Indeed. Is the time difference in the "Zet helderheid" card or "icrement value card"?
-
No it is one device. An Fibaro RGWB device. I just use this as a test flow, so the triggering is by hand There about 14 steps/ cards I know that the Fibaro RGBW device has an option to give a start brightnes, an end brightnes and a time to reach th…
-
caseda said: In fact, you don't want to connect to input straight to 0v, there either needs to be a normally open switch inbetween, or don't connect it at all. If you connect the input straight to 0v you can not control them at all, even with …
-
jorden said: Je zult vanzelf merken dat het hele spraakgedeelte eigenlijk minder handig is. Dat is althans wat de meeste mensen vinden. Het wordt pas echt leuk als je met bewegingssensoren en deursensoren gaat werken. Of bijvoorbeeld je TV aan …
-
Kan je je flow hier plaatsen. Dat geeft een beter inzicht
-
Volgens mij zou het zo moeten werken idd Bart. Ben ook benieuwd naar andere reacties hier
-
Fire69 said: Removing the diagram is completely stupid! I don't complain often (only for the non-functioning voice until now) but this is really bad IMO... If you just start removing functionalities because you can't get them to work as you exp…
-
Just did an update to 1.5.8 As a present I did receive spontaneusly an "unknown node"" Is this recognized by somebody? Any idea how to remove this node? Beside this I don't see for a couple of days no "z-wave spider" anymore at tools.
-
Vleege said: canedje said: Vleege said: Using Chrome version 64 and up on different devices without problems. Did you check your version? Versie 64.0.3282.186 (Officiële build) (64-bits) I can open Homeda.sh, but cannot…
-
AppelFlap321 said: I for one am very sorry to read that the desktop application will be removed in favor of a phone/tablet app. Despite tha the desktop has obvious usability limitations when using longer names and longer variables etc, I don't …
-
mveck said: Je kunt de blauwe draad ook vanuit de lamp naar de doos trekken. Even wat extra werk maar lukt vaak ook wel. Ook dan moet de tl er af en als ik goed lees gaat z-wave module niet passen in de inbouwdoos.
-
Eternity said: And, other that in the manual and posted here before... To reset the FGS-222 you have to - disconnect it from mains - press the B-button - connect to mains. That successfully reset mine. Good to know!
-
PeterK said: Rocodamelshe said: PeterK said: . Maar past dat wel in NL inbouwdozen? Voor mijn gevoel zit daar heel weinig ruimte achter de gewone schakelaar. Ik kan natuurlijk de boel losschroeven en gaan meten, maar het is va…
-
Er is altijd een oplossing. Sommige heb ik in de inbouw dozen, sommige in de centraaldoos en als echt niks past heb ik ze in de lamp zelf ingebouwd
-
Vleege said: Using Chrome version 64 and up on different devices without problems. Did you check your version? Versie 64.0.3282.186 (Officiële build) (64-bits) I can open Homeda.sh, but cannot add widges. Nothing happens if I do hit +add…
-
caseda said: @canedje The user guide is right in the card itself, check the information icon oeps.. never looked at it
-
Eternity said: Pffff, after a PTP and another z-wave reset, the mesh is empty. That shoud have been the easy step ;-) Good luck!!! If you need some help, just call
-
Thanks for the help. It is working nice now One question what or why to use {{ and }} in the "Bereken een numerieke variabele"? Is there somewhere userguide how to use the logic cards ?
-
I'm doing something wrong again. I do made number variables in better logic "tijd" and "tijd na 12". And try to use it in the default logic app. The result is zero. You did make number vars in the standard logic app? How make this vars? EDIT: It l…
-
Tiyrell said: You first need to put the time in a numeric value Then do the calculations on the numeric value (using the default logic app myself, not better logic) I made a very nice clock myself as well, using my old Casio Melody watch as …
-
It is not running on Chrome. On the same computer at edge it is working. Only the select boxes are very small
-
posthok said: Ook al geprobeerd heb hem niet werkend gekregen. Het is een IR app. Homey moet "in zicht" staan met de tv, anders werkt het niet
-
mveck said: Hi all, having a Homey shipped with 1.5.6, but check for updates doesnt give me the option to update to 1.5.7. It is a bummer, because having a 1.5.6 out of the box I already have 3 zones which I cannot rename properly... Is there a…
-
Good idea. I'm missing this also. Sometimes I do add a card with a specific reason I don't know anymore after a while. Adding comment wil help to remember
-
vaderag said: canedje said: On top canedje said: On top Right on the top as it's sitting? Or at a slight angle to the forwards (the direction the homey sits in?) as far as I know, right on top. (I did see …
-
On top
-
This works perfect on Chrome an looks great! I can switch a bulb on, but the slider is not moving. After switching on I can not switch it off anymore. I also can make one switch box. If I like to add another one both boxes are the same On my iPad I …
-
Voor alle duidelijkheid. Aan uit is met een schakelaar, niet met de afstandbediening.
-
mveck said: Hi @canedje You are correct. Actually the tag I was taking was from the tag menu.... now I have used drag-drop from the Toon Thermostat and (at least 1 or) works... I cannot get a 2nd drag-drop working for me, (screen freeze).. To b…
-
Ik gebruik simpel log bij elke flow. https://apps.athom.com/app/nl.nielsdeklerk.log Ik kan in mijn log file dus terugzien welke flow wanneer gestart is