This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Thorarin

About

Username
Thorarin
Joined
Visits
13
Last Active
Roles
Member

Comments

  • Doesn't sound like the same issue to me. I'm trying to remove the device without actually communicating with it. The issue described seems to be about failures in communication. I'm not really experiencing issues with pairing myself, so the issue a…
  • I have to say I'm rather allergic to apps demanding access to all my contacts and my call log up front, especially when there is no reason to have access to this type of information to do its job. I'm a developer too, so I kinda understand start…
  • bvb said: Here the answer of Sensative below... please can the owner of the app, can make a choice to disable the thatus of the strip? Only the open or closed status, as I want the batery life still in my settings. I don't know of any w…
  • You would have to wake up the Strips after manually setting that parameter, but they should already be set when adding the device to Homey. When you place the magnet in front of the sensor and then remove it, how often does the LED on the sensor bl…
  • I'm currently waiting for a fix in the homey firmware to be published. This should happen in 1.0.3. In addition, a minor update to the app should make sure that initial parameters are set correctly, but I cannot in good conscience publish that …
  • I'm no longer able to pair Strips using the 0.9.2 firmware. The process seems to work okay and Homey receives an initial status of the sensor, but immediately after the sensor will start complaining of a communication error (5 LED flashes every time…
  • Webster said: Try 'command_get_parser' : function( value ) { That function doesn't accept any values. It's not really a parser as far as I can tell, more like a request builder. The actual data is supposed to come with the rep…
  • Jeroenvano said: Strips unable to add with basic Homey zwave Does the actual adding fail? I'd expect that to work, but Strips isn't configured to use basic reporting by default. If you're able to set configuration parameters for basic …
  • Jeroenvano said: Unfortunately the triggers do not work in flows, but this is more a zwave issue on Homey I believe as there are some more treads around that topic here on the forum. Indeed, prior to 0.8.39 my single Strips sensor u…
  • I'm having the same issue other people have mentioned regarding triggers for my Z-Wave contact alarm. It seems Homey and the device are communicating fine, but I only see the contact alarm changing status if I close and reopen the little popup under…
  • Robin said: [MiLight issue] Weird, happened here as well. For now please re-add the devices, will look into this issue asap! Readding worked for a little while, however after a reboot, they are broken again.
  • JurgenHuijbregts said: mi-light seems to be broken?? They're not working for me either since 0.8.38.
  • Robin said: For now this is not in the pipeline, it will probably take a lot of effort to get that working properly as I understand from the blog. But it of course free to submit pull requests   Is non-WiFi communication on the 2.4 GHz …
    in milight Comment by Thorarin June 2016
  • My experiencies so far with 0.8.36: * CPU load has gone down quite significantly, like 30% or so * Uploading and running a Homey app is *much* faster for me (over WiFi) * Connecting over USB from Windows didn't work for me at first { [Error: xhr p…
  • Well, if the controller they are added to dies, I think resetting on the device itself would be the only option. It wouldn't make sense if I could remotely force devices to reset from a different controller, would it? Your neighbor would be able to …
  • It took me ages to realize there was a built-in command for that, since I created a flow that responded to "lights on". When I added a KAKU switch as a light I was wondering why it was turning on even though it wasn't part of my flow
  • Isn't the device supposed to have its own method to do the reset?
  • Has anyone developed a Larson scanner yet?
  • The Strips sensors do use Z-Wave plus Anyway, I did the pairing exactly as in the manual. The instructions are correct at least in my package. I didn't watch the video for that part, only for the placement.
  • MarcoF said: The extended and/or features/cards are on Athoms (wish)list, since dec 2015, for the next flow"editor" release. https://trello.com/c/1Nn24t2J/35-flow-editor-improvements Yeah, I know. However, this seems to be rather low on…
  • I've installed a Strips yesterday (product in the original post). To my pleasant surprise, adding the device to Homey worked perfectly the first time (version 0.8.35). It wasn't added in secure mode, but I'm not sure if that's even supported by Str…
  • Thanks for your suggestions regarding rebooting and such. Unfortunately it did not make any difference for me. I've created an issue on GitHub (#588) for completeness' sake.
  • Definitely something seems to be going wrong with the interview. I've tried it several times now, always with the same result. Homey shows nothing but the Node ID and a checkbox that the device is working in secure mode. I'm pretty sure someone men…
  • SietseVisser said: The only way for me to reliably test whether a mac address is present or absent is by using the app Better Logic, and then use a Math.js expression. Only fill in the Present label; if you want to capture an Absent event, chec…
  • *sigh* Unfortunately I bought a Roomba 880 literally 1 week before the 900 series was announced. I've seen the TC 3D-printed models for it, but that's not really an elegant solution.
  • Haha, I suppose that could use some tweaking, but that's just a side effect of floating point math in a binary system  
  • I agree about it being too niche, but I can hope, can't I? Unfortunately I doubt I can find the time for such a hobby project. It's been years since I've done any serious tinkering with hardware. Ah well...
  • The speech recognition is giving me mixed  results as well, currently not good enough to be terribly useful. A few examples: "turn the tv off" => "turn the key all" "turn on the tv" => "300" (whut?)
  • I can't seem to get this flow to work. I've created a flow and set the volume to 7%, pressed test. Afterwards Homey is still annoyingly loud. When I voice activate the flow "ok homey, be quiet", homey stopped listening to any further voice commands …