This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MartijnDeRhoter
About
- Username
- MartijnDeRhoter
- Joined
- -
- Visits
- 159
- Last Active
- Roles
- Member
Comments
-
Rocodamelshe said: MartijnDeRhoter said: But with the power on, the bulb becomes reachable, no? Would that not count as "Turned On"? "Turned on" is only working when u change the state of the bulb within Homey, not by poweri…
-
But with the power on, the bulb becomes reachable, no? Would that not count as "Turned On"? As much as I agree with getting rid of old wall switches, this setup would turn an old wall switch into a switch you can use with Homey (specific Hue light…
-
If I use this card as a trigger: Would that also work if the Hue light is switched on by an old fashioned wall switch? I can only get the trigger to fire when I turn on the light in Devices - does Homey poll for these events?
-
Bumping an earlier post from @tunf; is it by design that a Long Blink effect doesn't revert the Hue light to its previous power state?
-
Thanks for the help @GeurtDijker, just being able to import those variables and the countdown ones saves me a lot of time. I'll go ahead and import the flows and manually re-add my devices. And yes, I agree on the import-with-a-different-guid bit o…
-
@GeurtDijker - I'm trying to import two sets of AppsVars (my device got wiped), and luckily I made a full export a few days earlier. However, when I try to do an Import-HomeyAppsVar, I get this: PS M:\HomeyExport\June\Apps\net.i-dev.betterlogic>…
-
Update: this seems to be an RC11 bug that wiped my Homey, so eh... I know what I'll be doing the rest of this month!
-
Seven hours later , another 10MB extra in Other Update: it's now at 196MB. Exciting!
-
Yup: Steadily growing (never seen this before, then again - I don't spend my days looking at this) Geek info: arch arm cpus [{"model":"ARMv7 Processor rev 10 (v7l)","speed":996,"times":{"user":149321400,"nice":53932800,"sys":226296900,"idle"…
-
Yup, it's only the LED ring that turns off, power stays on just fine - changing the corresponding settings has no effect. Never mind, if it's an isolated incident I'll try to re-pair the plug at some point. It's purely a cosmetic issue at this point
-
@caseda - could you be present near my wall plugs as well? Three of them no longer have a functioning LED ring (it turns on for half a second when the plug switched on, but that's it). I'm on HFW 1.1.2 with Fibaro 1.1.9. Homey reboots every night …
-
Yes please. It's too cold for anything else anyway.
-
Boing: Stack trace: Error: Uncaught, unspecified "error" event. (XMPP authentication failure) at Client.emit (events.js:144:17) at Client._handleAuthState (/node_modules/node-xmpp-client/lib/Client.js:298:10) at Client._handleStanza (/node_modules/…
-
Jesus - you know how long I've been trying to fix that? Thank you sir, and boo to the official client.
-
And what can I do to populate the Type and Command boxes? Device populates just fine, but the other two do not.
-
caseda said: @MartijnDeRhoter use the "Harmony Hub app" in your list, not the device dOh! Thanks
-
If the When cards don't work, what can I do? Dragging the Harmony device into it doesn't make it stick
-
dmontanje said: If you want wave devices to trigger each other, it is better to use association groups. The benefit is that also without the controller active, the devices can trigger each other. Which is of good use when you want to trigger al…
-
All fixed - it works! Turns out there was a conflicting flow hidden deep away in a non-related folder. Thanks for the help!
-
Fairly sure, it's the same condition I use for the other Kodi-light-controls (so lights don't come on when they weren't on in the first place) This one for example works fine:
-
Avec plaisir:
-
@brinkie - awesome!
-
Thanks! I'll dig some deeper then
-
"Kodi starts playing something" -> dim the lights, perfect. "Kodi has been paused" -> bring the lights back up, works "Kodi has been resumed" -> dim again, works fine. "Kodi has been stopped" - lights should go back up, but don't! I'm star…
-
Ah - yes, would it be possible to detect if the Everything Off button has been pressed on the Harmony? So not a switch between activities that switches off individual components (and switches on others), but the overall Everything Off button. I'd l…
-
Excellent, thank you very much - especially for fixing the second bug from the bottom, that got me sooo many times
-
caseda said: @MartijnDeRhoter ; no it does not matter, it is the way the usage is being calculated, so it shows "properly" in your homey (Wattage and kWh) with LED the default should be the best option for your situatie (actually any situation …
-
caseda said: @MartijnDeRhoter i have never heard of the dimmer 2 trying to turn on LED's several times, does it always happen or only when you switch the manual switch or only when you try to turn it on with homey? you can try to activate the…
-
Can anyone help me find out how to retrieve error messages from a Dimmer 2? I have two of those controlling three LED bulbs each, the setup is entirely identical - one works fine all the time, the other often fails to start the LEDs (tries a couple …
-
For those stuck with a purple ring that never ends: - Using Linux (bootable USB disk can be made from this version: https://www.ubuntu.com/download/desktop, you can boot off the ISO and open the terminal) - Follow the steps here (OSX, Linux or Rasp…