›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

Homey v0.10.3

JeroenVollenbrockJeroenVollenbrock Member
in Archive
Homey v0.10.3 has been released to the experimental channel. This release is scheduled to become the new stable version tomorrow.

 Changelog:
  • Fixed a bug where sometimes app settings would restore to an older backup when the app was installed and not updated on an older Homey version
  • Improved drag and drop sensitivity in the flow editor
«1345

Comments

  • adjuadju Member
    Needed to pair somfy's again in 0.10.1 and 0.10.2.
    Installed this FW and problem solved.
  • ZperXZperX Member
    Yes indeed the flow editor feels smoother.
    This update haven`t broke anything. :wink: 
  • Erwin1Erwin1 Member
    My hat is off to the guys at Athom! Since the 0.10.0 build they really are able to fix bugs in a high pace! 

    Nicely done! Keep up the good work guys! 

    Only one minor downside is that I now seem to no longer be able to actually choose a flow in my browser Chrome on my Android phone (Sony Xperia Z5)... To me it's not really an issue because I like working with Homey from my laptop more than on my phone but still something to look into... 
  • ReemsterReemster Member
    Erwin1 said:
    My hat is off to the guys at Athom! Since the 0.10.0 build they really are able to fix bugs in a high pace! 
    They did fix the big bugs fast because every programmer @athom was working on bug fixing for shipping the Homeys with the stable release tomorrow... So don't get used to it next time  ;) 

    BTW: good update!  :)
  • 0burner00burner0 Member
    Hmm I wish I could update, keep getting the extractpath_not_writable bug.

    Restarted about 20 times some time with 10 PTP.  Didnt help :(


  • PieterKleinjanPieterKleinjan Member
    The sunset trigger does not send a message once a day, but every two minutes.
  • EmileEmile Administrator, Athom
    0burner0 said:
    Hmm I wish I could update, keep getting the extractpath_not_writable bug.

    Restarted about 20 times some time with 10 PTP.  Didnt help :(


    Try disabling some apps, reboot, and try again. It's a bug because Homey's memory is too full, and we can't make free space.
  • TheoDeKoningTheoDeKoning Member
    :'(
    https://forum.athom.com/discussion/119/the-amount-of-memory/p1

  • EmileEmile Administrator, Athom
    Don't worry, we have a fix around the corner ;)
  • 0burner00burner0 Member
    Emile said:
    0burner0 said:
    Hmm I wish I could update, keep getting the extractpath_not_writable bug.

    Restarted about 20 times some time with 10 PTP.  Didnt help :(


    Try disabling some apps, reboot, and try again. It's a bug because Homey's memory is too full, and we can't make free space.
    Thnx worked!!
  • TheoDeKoningTheoDeKoning Member
    edited October 2016
    The Firmware site, https://firmware.athom.com/, is operational, https://status.athom.com/, but first empty and after some time an undefined message.



  • bvdbosbvdbos Member
    I already have 0.10.3, if I push the update-button it says no new firmware available. That part seems to work...
  • HarmStellingaHarmStellinga Member
    Here also no 0.10.3 availible, same message as TheoDeKoning.
    There something wrong.

  • DenWDenW Member
    edited October 2016
    I had 0.10.0, update says I could update to 0.10.3. Installed was 0.10.2. !
    If I click the Check for Updates button, the button remains grayed-out (checking) and after a while I get an unknown_error..

    Clicking on a Flow does nothing, so I can not edit any Flow. Some are broken.
    Also, all of a sudden i'm missing some ZWave devices i'm sure I registered before..
  • bvdbosbvdbos Member
    Seems to works now is said on Slack...
  • TheoDeKoningTheoDeKoning Member
    It is. ;)
  • DenWDenW Member
    Thanks.. Yep.. updated to 10.3 this time..
    Flows are working again. Well.. by clicking them i can edit them..
  • HarmStellingaHarmStellinga Member
    @TheoDeKoning came 10.3 by itself, here still same error, after boot and a PTP. :o

  • bvdbosbvdbos Member
    @HarmStellinga : you have 0.10.2 and can't update?
  • TheoDeKoningTheoDeKoning Member
    Homey still not online because I am waiting for the stable version.
    The https://firmware.athom.com/ page is again broken down to see if it's promoted.
    Besides that, my i-net, Ziggo, connection is going again bad. Losing upstream channels.

  • EternityEternity Member
    Anyone problems with Philips Hue?

    I have updated the firmware to 0.10.3 and now Philips Hue lights are not recognized. I PTP, disabled en re-enabled the Philips Hue App, all to no avail...

    All other stuff seems oké (Lifx, Thermosmart, Fibaro, Greenwave, KaKu. Kodi, Harmony Hub)
  • cnvissercnvisser Member
    @Eternity No, not at all mine are working fine.
  • bvdbosbvdbos Member
    @Eternity You should go to add devices and search for new devices. Then they'll probably show up. At least, they did for others. Don't have HUE myself...
  • EternityEternity Member
    A third "PTP" did the trick...

    Same as my last marirage ;-)
  • TheoDeKoningTheoDeKoning Member
    Just an e-mail about the expectations to give version 0.10.3 stable status tonight.
    For Homey's with version 0.8.29 or earlier is it advice to do a recovery with clearing the data.


  • SommoSommo Member
    Ok, i recieved it too, i need to perform a recover now before the 0.10.3 will be released?
  • TheoDeKoningTheoDeKoning Member
    edited October 2016
    Maybe you get the last stable, 0.8.32, first.
    Therefore I wait till the 0.10.3 that.
  • TheoDeKoningTheoDeKoning Member
    0.10.3 had lost the red tag. :smile: 
  • HarmStellingaHarmStellinga Member
    BasVanDenBosch said:
    @HarmStellinga : you have 0.10.2 and can't update?
    When i just came home, i have updated to 0.10.3
  • JwoudenbergJwoudenberg Member
    Updated to the stable 0.10.3, but it seems i can't install any apps.

    error: This app is incompatible with your Homey software version

    Tested this with the KaKu and Fibaro app.
This discussion has been closed.