›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

Homey v0.10.3

1235»

Comments

  • frankvanesfrankvanes Member
    uNiiek said:
    jtebbens said:
    Updated from 0.8.39 to 0.10.3. Was able to add some KaKu devices. But have problems with Zwave/Fibaro FGMS-001 motion sensor which I cant add (yes removed/resetted/learning mode etc.).
    I have the same issues. I can't add ANY Zwave devices. Even did a factory reset. Tried a Fibaro Socket, Motion Sensor and Flood sensor. None of them will pair after the 10.3 update.
    Same as this issue: https://github.com/athombv/homey/issues/905 ?
    I did not get any error messages. Just the message that the pairing timed out. I have tried a factory reset (deleted all data ) and power down as well. So the install should be fresh. I tried adding using both the app and the built-in Zwave option. They both timeout. 

    Maybe I didn't look in the right place for an error message? 
  • carelpeercarelpeer Member
    Since homey 0.10.3 was installed I had a few issues, so I gave it a hard reset and completely wiped it and started fresh again. Now everything is working perfectly except for IR. Is this a known issue?
  • carelpeercarelpeer Member
    For some reason it works when I add a delay. It is almost as if the IR is to sensitive or to quick ATM.
  • SommoSommo Member
    IR is quick much receptive on getting ir input (much better then previous version).. but still have trouble in output (poor signal).. i dont know if it is a know issue 
  • NienixNienix Member
    After the update my Old flows are gone.  So i Made some New.
    But now All my Old flows stil work somehow. But i cant see them in the Flow manager. 

    How kan ik Delete them? 




  • sanderbontjesanderbontje Member
    @Nienix see this Bug report https://github.com/athombv/homey/issues/940 appears to be same issue
  • NienixNienix Member
    sanderbontje said:
    @Nienix see this Bug report https://github.com/athombv/homey/issues/940 appears to be same issue
    thx. Will be fixed in next update.
  • rubenprinsrubenprins Member
    Maybe it's a known issue but i couldn't find it on the forum, but homey tells me "niet drinken" (don't drink) if i do a request. Maybe he is right but it is also annoing ;)
  • bvdbosbvdbos Member
    You could create a flow which disable's the hidden flow (as they do show up in the flow-card. That way it will still be there but won't run twice....

    @rubenprins : What does Homey think you said on : http://<homeyip>/manager/speech-input
    Did you make a flow which answers with "don't drink"?

  • btwvincebtwvince Member
    Did somebody have problems with NFC? Homey doesn't recognize any NFC tag. It just does nothing, could my NFC chip in Homey be broken or is this a bug in this firmware?
  • Fire69Fire69 Member
    Saw someone on Slack with NFC problems.
  • msmitsmsmits Member
    edited October 2016
    btwvince said:
    Did somebody have problems with NFC? Homey doesn't recognize any NFC tag. It just does nothing, could my NFC chip in Homey be broken or is this a bug in this firmware?
    Im  not 100% sure, didnt try it myself but if im right you need to get the ID first by creating a flow:

    Trigger NFC -> Let homey say the ID

    Then you can create a flow for that specific NFC card as trigger with the ID you just got. 

    Edit:
    https://forum.athom.com/discussion/758/learning-of-nfc-tags
  • RoderzRoderz Member
    Sommo said:
    is there a know problem when adding hue bridge 2.0 ? the new hue hub squared?
    i'm in stuck when homey says to push the button on the hub.. i pushit but nothing happens...
    I seem to have the same problem....
    one ptp, didn't resolve, can't add the hue bridge 2.0, maybe i will give it a try with more ptp session.. let me know if u resolve..i can't ptp now, i have to go out for few days
    I had the same problem with hue bridge 1.0, you have to press the button really quick after the message to press or else nothing happens
  • SommoSommo Member
    Roderz said:
    Sommo said:
    is there a know problem when adding hue bridge 2.0 ? the new hue hub squared?
    i'm in stuck when homey says to push the button on the hub.. i pushit but nothing happens...
    I seem to have the same problem....
    one ptp, didn't resolve, can't add the hue bridge 2.0, maybe i will give it a try with more ptp session.. let me know if u resolve..i can't ptp now, i have to go out for few days
    I had the same problem with hue bridge 1.0, you have to press the button really quick after the message to press or else nothing happens
    i resolved the issue by removing and reinstalling philips hue app
  • rubenprinsrubenprins Member
    BasVanDenBosch said:
    You could create a flow which disable's the hidden flow (as they do show up in the flow-card. That way it will still be there but won't run twice....

    @rubenprins : What does Homey think you said on : http://<homeyip>/manager/speech-input
    Did you make a flow which answers with "don't drink"?

    I don't have a flow don't drink and it also performs the requested flow. Strange
  • NienixNienix Member
    rubenprins said:
    BasVanDenBosch said:
    You could create a flow which disable's the hidden flow (as they do show up in the flow-card. That way it will still be there but won't run twice....

    @rubenprins : What does Homey think you said on : http://<homeyip>/manager/speech-input
    Did you make a flow which answers with "don't drink"?

    I don't have a flow don't drink and it also performs the requested flow. Strange
    There are some build in reaction from Homey.
    So if you log at the speech input page, you can see what Homey thinks you said.
  • batteries4everbatteries4ever Member
    rubenprins said:
    Maybe it's a known issue but i couldn't find it on the forum, but homey tells me "niet drinken" (don't drink) if i do a request. Maybe he is right but it is also annoing ;)
    Maybe you're slurring your commands? Try to pronounce them as if you were sober...



  • rubenprinsrubenprins Member
    Nienix said:
    rubenprins said:
    BasVanDenBosch said:
    You could create a flow which disable's the hidden flow (as they do show up in the flow-card. That way it will still be there but won't run twice....

    @rubenprins : What does Homey think you said on : http://<homeyip>/manager/speech-input
    Did you make a flow which answers with "don't drink"?

    I don't have a flow don't drink and it also performs the requested flow. Strange
    There are some build in reaction from Homey.
    So if you log at the speech input page, you can see what Homey thinks you said.

  • rubenprinsrubenprins Member
    Homey understands exactly what i spoke and turns of the lights when i ask but keeps on telling "don't drink"
  • RobinVanKekemRobinVanKekem Member
    rubenprins said:
    Homey understands exactly what i spoke and turns of the lights when i ask but keeps on telling "don't drink"
    Is it better in firmware 0.10.5?
    Otherwise you could contact Athom support
This discussion has been closed.