›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

Version 0.8.22

245

Comments

  • TacoTaco Member
    If you reset Homey nothing has happened on your Z-Wave device. It still thinks it is in the network.
  • MennoVanDerAatMennoVanDerAat Member
    edited March 2016
    @Taco ;
    The trick was resetting device indeed from manual:

    The Fibaro Motion Sensor reset erases the EPROM memory, including all information on the Z-Wave network and the main controller. Fibaro Motion Sensor reset procedure: 1) Make sure the battery works and is in place. 2) Press and hold the B-button for 4-6 seconds until the LED glows signaling the 2nd menu level. 3) Release the B-button. 4) Again, press the B-button briefly. Successful reset will be confirmed with the LED changing colour to red and fading

    After that homey is detecting my motion sensor many thanks for your help
  • TacoTaco Member
    Happy to help :)
  • Fire69Fire69 Member
    Your sensor is still 'connected' to your non-existing previous network.
    The sensor doesn't know you reset your network so you first have to remove it.
    In the z-wave settings, do a 'remove node', then put your sensor in 'learn' mode.  It will be removed (reset).
    After that, you should be able to add it again through the normal procedure.
  • Fire69Fire69 Member
    I sadly have to say z-wave is still very, very unstable.  :(
    Still having the same problems as before.  Can't add Fibaro Dimmer 2, error during interview, unusable device was added, can't remove it anymore, errors during removal, 'running in another session', popups with no text expect for 'true', etc...
  • JustjomiJustjomi Member
    I did a full reboot/wipe to start-over all clean with 8.22. The Fibaro Dimmer 2 is not paring which by resetting the Z-wave chip does not solve it.
  • TacoTaco Member
    Working on it. I'm unable to reproduce most of the errors so debugging is very hard. For instance: the popup with "true" I have only experienced when I kill Homey manually but never while trying to reproduce issues. This makes fixing very difficult.

    Unusable device added is fixed in 0.8.23.
  • MartijnDeRhoterMartijnDeRhoter Member
    mruiter said:
    Sundown an  sunrise confirmed to be still broke...
    Yeah I noticed that too - well at least sunset, but I doubt sunrise will work tomorrow morning. Has this been flagged as an official issue yet?
  • JustjomiJustjomi Member
    @Taco, if you want a log of my system: 4F3817C1C5. 
  • Fire69Fire69 Member
    Taco said:
    Working on it. I'm unable to reproduce most of the errors so debugging is very hard. For instance: the popup with "true" I have only experienced when I kill Homey manually but never while trying to reproduce issues. This makes fixing very difficult.

    Unusable device added is fixed in 0.8.23.
    It's strange that you seem to be having way less problems than us :smile: 
    You have no problems adding the Dimmer 2?
    The device that was added when trying to add my dimmer timed out and I was able to delete it on the Devices page.
    Still have an 'unknown node (7)' left (don't know anymore where it came from, my 1x Relay I think)

    If you need a log: 1E88DB27D7
  • bvdbosbvdbos Member
    @Fire : I retried and indeed. Speech-input freezes Homey. Now restarting with mic off...
  • mruitermruiter Member
    edited March 2016

    @Taco still trouble with adding AEOTEC Smart Switch 6

    Add fails multiple times, had 1 time that i got a little detected but was unable to switch and powermeter did not show up. Just a switch that was not switchable.

    Configuration Parms are also not available


    Remove runs endless even when reset zwave command. Reset complete zwave i've not done. Next to the "this is not the way to do it" i can reset it to default every hour without a backup and restore settings funtion

    Send log in under 801695E185

  • PeterNijenbrinkPeterNijenbrink Member
    My Homey is after The update not connect To The server. When i reboot Homey he is connected but after 10 minuters he's not conected.
    With The old software he was always connected. What van i do?
  • bvdbosbvdbos Member
    Fire69 said:
    I changed my language and voice to Dutch.  Was trying some thing through the /speech-input (to see what apps already have Dutch triggers).
    Now suddenly my Homey isn't responding anymore :bawling: 
    https://github.com/athombv/homey/issues/321

  • PeterNijenbrinkPeterNijenbrink Member
    I think iets not The same @BasVanDenBosch because i only have an update, no change of language
  • Fire69Fire69 Member
    Changed mine back to English.
    It doesn't hang anymore, but it also doesn't (or hardly) react to 'ok homey'  :/
  • bvdbosbvdbos Member
    Did that too, still get the hangs... I put a pluswise(source-plug) between power and homey so I won't have to keep pulling the plug literally. As for the recognition, I'm gonna try a complete reboot (no restore) tonight to see if that helps the hanging, perhaps recognition is better then too?
  • Fire69Fire69 Member
    Rebooted several times already since yesterday, still no reaction...
  • PeterNijenbrinkPeterNijenbrink Member
    After reboot Homey stil not connected @Fire69 ;
    (na opnieuw opstarten verbreekt Homey bij jou ook de verbinding na enige minuten?)
  • mruitermruiter Member

    Just to confirm, Sunrise is also not working as test show on the flow for this morning.

  • PhuturistPhuturist Member
    mruiter said:

    Just to confirm, Sunrise is also not working as test show on the flow for this morning.

    As this is a registered bug on Github my guess is that Athom will mention it in the release notes of a firmware update once they get to it and fix it. :+1: 
  • TheoDeKoningTheoDeKoning Member
    edited March 2016
    The sun evens ticket is closed and I can't find a open ticked that noticed that the fix in 0.8.7 didn't work.
     https://github.com/athombv/homey/issues/8
  • PhuturistPhuturist Member
    The sun evens ticket is closed and I can't find a open ticked that noticed that the fix in 0.8.7 didn't work.
     https://github.com/athombv/homey/issues/8
    Right here: https://github.com/athombv/homey/issues/182
  • NattelipNattelip Member
    my homey did it 15 minutes(turning rainbow) with 0.8.22 and moved in thinking state for ever,  rebooting with power off  gives 4 times same result turning in thinking state in 5 minutes .  no connection possible with webinterface.
  • TheoDeKoningTheoDeKoning Member
    *blush*
    Sorry, I overlooked that one and I had my classes on. ;)

  • bvdbosbvdbos Member
    Nattelip said:
    my homey did it 15 minutes(turning rainbow) with 0.8.22 and moved in thinking state for ever,  rebooting with power off  gives 4 times same result turning in thinking state in 5 minutes .  no connection possible with webinterface.
    https://github.com/athombv/homey/issues/321 I guess...

  • NattelipNattelip Member
    edited March 2016
    Nattelip said:
    my homey did it 15 minutes(turning rainbow) with 0.8.22 and moved in thinking state for ever,  rebooting with power off  gives 4 times same result turning in thinking state in 5 minutes .  no connection possible with webinterface.
    https://github.com/athombv/homey/issues/321 I guess...


    no no no a few weeks ago when i received my homey i tried dutch but changed it to english the same day and that will stay this way. i only browsed through the homey to see the the changes in the new version 0.8.22. no voicecommands, in my livingroom are always people talking. i went for a smoke outside and when i returned the hoemy was nonresponsive by ip yellow/white ring etc. i have a mini app installed by myself with a minor adjustment in text from nl.athom.hello example app.
  • MathijsFrenckenMathijsFrencken Member

    https://github.com/athombv/homey/milestones/0.8.23

    Milestones for 0.8.23, athom is looking into the bug where homey crashes after the first voice command. 

  • brinkiebrinkie Member
    MathijsFrencken said:

    https://github.com/athombv/homey/milestones/0.8.23

    Milestones for 0.8.23, athom is looking into the bug where homey crashes after the first voice command. 

    Shouldn't we put this link in a new thread for 0.8.23? That would make a nice changelog, if kept up to date by @Emile !
  • tunftunf Member
    done, see new post Version 0.8.23
This discussion has been closed.