This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

SdR

About

Username
SdR
Joined
Visits
36
Last Active
Roles
No Roles

Comments

  • Make a feature where we can backup and import our flow set to disk, I want to do a factory reset because all my devices are not respondig anymore since firmware 0.9.1 but I know i will lose all my flows. this is the only reason I have not done it.
  • I waited for two full days".. resetted my homey again fully, hopefully it works when I have set it up again.
  • B1B2 said: Here same issue after update, used to control my lights via IPad, that's not possible anymore. Every home automation system needs an app that works good on tablet, same tablet on which you do all your other daily stuff. Hope Homey …
    in iOS Update Comment by SdR December 2016
  • Tried ot but App keeps crashing now on iPad
    in iOS Update Comment by SdR December 2016
  • Yep, no reply either... @Annemarie 
  • @Annemarie feedback graag
  • Tried it but I dont receive any mail, its not in my spam nor inbox.
  • Thanks, i already registred but forgot my password.... So i cannot login anymore on one device
  • I have, but how do I reset that password?
  • HansieNL said: I had the same problem before. I de-installed the app and installed the new version. But did it work?
    in iOS Update Comment by SdR November 2016
  • @lubbertkramer I am aware of the beta phase, but hiding behind this as excuse not the way to ignore the shared problems. I am now running 0.10 and as mentioned I have had al versions but all updates after 0.89 basicly made mine Homey useless, so if …
  • https://forum.athom.com/discussion/1968/for-emile-athom#latest
  • I forgot.... @Emile 
  • Ik geef wel een demo: Werking lamp icm Homey - 5 euro Werking 2 lampen  icm Homey - 9 euro Werking Zonnescherm icm Homey - 15 euro Werking schakelaar icm Homey - 7,50 euro Werking spraak Homey - 10 euro Werking Flow icm Homey - 25 euro Werkin…
  • Hier werkt kaku ook niet meer sinds de 0.91 update
  • I have the FGR-222 roller shutter, how can i do this now? or do i need to wait for a new updated Fibaro App?
  • HansieNL said: 433 still not recognized at distance more than 1 meter? This problem I have with KaKu, Action and Lightwave RF. My remote controls are worthless this way  Same here with KaKu 1000 versions, still not pairing.... This is a…
    in Homey v0.9.3 Comment by SdR August 2016
  • No im not known with ghe Chrome Console, where can i find this? already deleted and reinstalled KaKu App.... Same bad result
  • Nah, got non tech people beside me as neighbours. And should be coinsidence then, because 433 should be in pairing mode also. it worked on the old firmware, my guess is that no 433 signal is sent on all homey station for whatever reason, it jumps i…
  • @caseda something you need to address internal at Athom?
  • DennisBlotenburg said: Here is KAKU not working. Pairing is succesfull but turn the socket on/off does not work. I've the APA3-1500R sockets. This was happens with version 8.39, 9.91 and also with 9.92. Same issue with the ADC-1000
    in Homey v0.9.2 Comment by SdR August 2016
  • caseda said: So Many: https://forum.athom.com/discussion/comment/27284/ https://forum.athom.com/discussion/comment/19969/#Comment_19969 But don't expect it soon™ There is no rush, as long as I have it by the end of next week.
  • KoenMartens said: SdR said: @emile serious KaKu and other issues with 0.91 firmware. Everyone is waiting for a response, I had old firmware which most devices was working, now none of them are working. Any reply would be appriciated b…
    in Homey v0.9.1 Comment by SdR July 2016
  • @emile serious KaKu and other issues with 0.91 firmware. Everyone is waiting for a response, I had old firmware which most devices was working, now none of them are working. Any reply would be appriciated by more than only me.
    in Homey v0.9.1 Comment by SdR July 2016
  • They do pair, problem is they do not act....light is not turning on. Homey asks to test after pairing and there is no response, also not when using it in a flow. flow worked before update, after update KAKU device was missing so I replaced it with …
    in Homey v0.9.1 Comment by SdR July 2016
  • KlikAanKlikUit werkt bij mij ook niet meer... alle devices en Z-wave devices zijn verdwenen na de 9.1 firmware update. Nu getracht met nieuwe KlikAanKlikUit App versie 2.1 KaKu devices weer te koppelen en hij geeft aan ze gekoppeld te hebben maar d…
    in Homey v0.9.1 Comment by SdR July 2016
  • KlikAanKlikUit werkt bij mij ook niet meer... alle devices en Z-wave devices zijn verdwenen na de 9.1 firmware update. Nu getracht met nieuwe KlikAanKlikUit App versie 2.1 KaKu devices weer te koppelen en hij geeft aan ze gekoppeld te hebben maar d…
  • caseda said: Homey firmware 0.8.39 is what your "doing wrong" There is a bug with triggering on the z-wave devices  @Emile fixxuuuuhhh
  • caseda said: Homey firmware 0.8.39 is what your "doing wrong" There is a bug with triggering on the z-wave devices  Allright... so not may fault
  • Ok then what am I doing wrong, because this flow is not working