This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Just_A_User
About
- Username
- Just_A_User
- Joined
- Visits
- 229
- Last Active
- Roles
- Member
Comments
-
canedje said: Did you try to put the device to learn mode again by pusshing 3 times the button? Or remove the battery for a while? I did have a simulair problem with a NEO PIR and it did help I haven't done this yet. Is this a solution …
-
No one? Added question: can I change the fibaro motion sensor in some way to prevent it from constantly giving off the motion alarm? Because no one is upstairs at the moment, and when I check the device, the motion alarm is continuously triggered.…
-
I edited the flow and added 2 delayed 'open' commands. This morning it worked. Weird though that this problem isnt there in the evening.
-
Eternity said: Oh, I see. Yes, I misunderstood your issue. Very odd..... but as you write, the flows *does* work... so it must be a communication issue between Homey and the Somfy receiver. I don't own Somfy, so unfortunately can't help you an…
-
Eternity said: Could you post a screenshot of your flows. I have a feeling that the 'morning workday flow' has an issue. I see how you made you think this....there is no 'weekday' and 'weekendday' flow. There is 1 flow for shutters down,…
-
Anyone?
-
@Rocodamelshe So, after trying a couple of days, the flow for the washing machine does not seem to work correctly. It reported just now that it was ready, but when I got down there, it turned out it still has 34 minutes to go. Something is not wor…
-
Rocodamelshe said: In the Fibaro plugs there is an option "always on". Uncheck it in ur settings and ur good to go. OMFG. So this setting was checked. Now I can switch it off! Thanks so much! Hmm..strange (or maybe not?) thing though.…
-
danone said: Just_A_User said: No, I have not tried PTP yet, because I'm not home. I can try PTP tonight. So when this happens to you, you basically reboot your Homey and then it works for an amount of time and then it stops workin…
-
danone said: Just_A_User said: danone said: Just_A_User said: The wallplug of the dryer however, does not. I don't understand why. I did not have time this morning to check what was going on. Any suggestions? The wallplu…
-
@danone Just tested it. Turned off the wall plug for the washing machine, no problem. It stays off. Then I removed all the 'turn off plug' cards from my flows for the dryer wall plug, saved those changes, and tried to turn off the wall plug. It …
-
danone said: Just_A_User said: The wallplug of the dryer however, does not. I don't understand why. I did not have time this morning to check what was going on. Any suggestions? The wallplug gives power consumption readouts, etc etc, it w…
-
So, the next chapter of this soap...: Like I said yesterday evening, I expanded the flow for the dryer yesterday evening. Why? Because when we turn on the dryer in the evening (the washer & dryer are in the basement) we don't have to walk down…
-
Rocodamelshe said: U must check the tags then. Can be the dryer tag is still in the washingmachine flows. Yeah, that was probably the case. However, I can not test it at the moment because we have nothing to wash at the moment. I did …
-
Rocodamelshe said: And now u gonna tell us u did make copies of ur dryer flows to make the washingmachine flows? Yes, I did. I made copies but obviously I changed them to 'wasmachine' so...should be OK, I guess? Next to that, I also e…
-
@Rocodamelshe Ok, so I just tested the flows 1 by 1, starting at 4...then 3, 2, 1. About 30 seconds after I manually tested flow 1, we got messages on our phones telling us the washing machine is ready. This is somewhere between 8 and 10 minutes…
-
@Rocodamelshe Nope, nothing. I have this: But, nothing :-(
-
Rocodamelshe said: It sure will! Washing machine should be about finished, but I haven't gotten a message yet... Nope...nothing yet...counter is at 0, it's sounding the 'alarm' that it is finished, but, no message from Homey..
-
Rocodamelshe said: Dryer ready?? I created those exact same flows for my washing machine. It is now running and will be finished in 1u35m, but I assume that will work too as it is the same principle?
-
Rocodamelshe said: Dryer ready?? Yes, and it worked amazing! I got a message on my phone, and my wife on hers, and it was actually correct. The only thing I'm going to add tomorrow is that the wallplug shuts off (if thats possible) so e…
-
Rocodamelshe said: Well, actualy i added a 4th flow for that. So my flows look like: Now the timer only starts when the boolean changed from true to false. In the old setup the timer also started when the energie changed from 9 to 2 b…
-
Rocodamelshe said: Yup. lookin good. Yeah! The flows work! I got a message on my phone tonight telling me that the dryer was ready. Awesome! Hey, funny thing. The dryer wasn't on....hehehe. So I don't know what happened, but the thing…
-
And here are the settings for the wallplug:
-
Rocodamelshe said: It's just the way i did it back then. The Boolean u have to make with the Better Logic app The countdown timer u also first have to make with the Countdown app. So you made 3 separate flows that you saved? Because I c…
-
Rocodamelshe said: Yup! That's awesome! So I now have a wallplug connected to my dryer, and I am trying to replicate the flows you made in the post you pointed me to earlier, but I'm having trouble recreating those. The first one, where …
-
Rocodamelshe said: Well, it's using 4,4 kWh in total for 1 drying cyclus so that's another story. Gegevens over het voltage, het stroomtype en de zekeringen vindt u op het typeplaatje. Het typeplaatje is vlakbij de vulopening gemonteerd (zie h…
-
Rocodamelshe said: 1 "group" can handle 3520 watts. I know it's peak but it sounds like a lot. Well, I just looked it up. The washing machine is not an issue. However, the dryer is a whole different story. It uses 4.4 kWh according to t…
-
danone said: Just_A_User said: However, looking up my washer and dryer, I found out that the washer has a max power consumption of 2500 watts, but, the dryer can apparently go up to 3800 watts. Wow! Is that a commercial drier or wh…
-
Rocodamelshe said: As long as u don't tell my wife it's ok! Hey, I completely understand you! There's a reason my wife is not allowed in our cellar! Ok, that one went a little bit too far maybe
-
Rocodamelshe said: If ur dryer runs at 3800 watts u must run a orphanage! Have 2 Fibaro wall plugs for the dryer and washingmachine and they run for like more then a year now. Can u share some info of ur dryer like make and model? There are som…