This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
RobertLijkendijk
About
- Username
- RobertLijkendijk
- Joined
- -
- Visits
- 148
- Last Active
- Roles
- Member
Comments
-
techniman said: Is there any way to troubleshoot this, e.g. see the transmitting power/reception etc ? I'd love to post my network topography but i suspect athom turned it off .. You should be able to see the Zigbee Network her…
-
Kyrcio said: You could try using {{zone}} or {{name}} as label format in Grafana. That did the trick, thanks a lot! I like the opportunities this app provides, keep up the good work!
-
Kyrcio said: Just a heads up everyone that the 1.1.3 version of the app is going to change the names of metrics to only include the state names and instead use labels for device and zone names. I am sorry if this causes problems for those of yo…
-
Kyrcio said: RobertLijkendijk said: Changing the port the app listens on in the code doesn't make a difference, I am unable to access the metrics page. Something really seems off.... @Kyrcio any idea what could be causing this…
-
Well you can see it going up from a pretty stable 0.5 to 1.5 and still increasing... You notice it in the responsiveness of the Homey interface as well... I am gonna make sure I'll replace my batteries but I think it would be good to just go with th…
-
After resetting my Homey to factory defaults and installing this app again it somehow started working. Is there a way to export the "presence" status as well? I can see it in insights but it doesn't show up in the Metrics page.
-
@OpenMind_NL the app-profiling shows a cpu usage of 2,4% for the app... Although the app seems to have a low cpu usage it does seems to have a big impact on the cpu load of the Homey. I use the Prometheus app to export Homey data and visualize it …
-
The downside of this approach is the app is flooding Homey with messages, causing a big increase of cpu load when you have to replace batteries on multiple devices like I am gonna have to do right now... I think since you can't get a "real" battery…
-
Hi @OpenMind_NL, thanks for your response. The issue isn't gone, I just removed the app from my Homey... I did not remove any devices before installing the app because it was a freshly installed homey (did a factory reset before). I have just inst…
-
It seems to me this app is showing some weird behavior... After installing it on a Freshly installed Homey (did a factory reset this morning) I can see the CPU load of the homey increasing heavily... When I install the "Homey Logger" app it shows o…
-
Rocodamelshe said: Did u open Google Assistant? I cannot seem to find a "Google Assistant" app in the iOs app store... I've changed my phones language and localization from Dutch / the Netherlands to English (US) and United States but i…
-
My request to become a beta tester for the app on iOs has been approved today
-
Changing the port the app listens on in the code doesn't make a difference, I am unable to access the metrics page. Something really seems off.... @Kyrcio any idea what could be causing this issue? Perhaps you can add some kind of logging the app s…
-
I've been looking through the code of the app, and I've modified the port from 9414 to 8080 to make sure it hasn't got anything to do with something within my network blocking/filtering traffic to port 9414. Will test it later today when I get home …
-
I am not filtering / blocking any traffic within my LAN... The app doesn't seem to be logging anything so it's hard to figure out what's wrong... I understand I should see information when I visit that page but unfortunately it doesn't work:
-
Thanks for your reply @lubbertkramer, the issue is on the side of Homey. The docker containers are running fine and the webinterfaces of Prometheus and Grafana can be reached. The IP of my Homey is 192.168.0.202. Visiting http://192.168.0.202:9414/…
-
Kyrcio Thanks for the great work so far! I've been looking for a solution like this! I started a container running Prometheus, and installed your app using the Athom CLI. The app is running on my Homey, but for some reason I cannot connect to http:/…
-
When will the Tado radiator valves be supported??
-
I am experiencing a lot of z-wave issues as well (a side of random crashing apps). I've installed the app "Candy" now to let Homey perform a daily reboot at 05:00 AM and for now most devices seems to keep working. Some days I cannot open my fibaro p…
-
Great work, nice to see you are constantly improving the looks and functionality of the dashboard. I think this is gonna be a must have for Homey users Gonna try V2 on short notice. Messed up the PI I had V1 running on so I am gonna reinstall that …
-
kasteleman said: RobertLijkendijk said: I am using 2 Quibino dimmers here as well, if needed I might be able to help you with testing. Do you have Type numbers? Yes Qubino Dimmer ZMNHDD1It also supports power consumption…
-
I am using 2 Quibino dimmers here as well, if needed I might be able to help you with testing.
-
It seems the app is only logging the total power consumption to Homey Insights. It would be nice if also the current power consumption can be logged to Homey Insights, just like Domoticz does. Thanks to that feature I discovered problems with my fri…
-
Will the roller shutter module be added to the app on short notice?? I want my blinds to go up when my smoke detector detects smoke And automatically close / open them based on temperatures / lux when I am not at home.
-
@MennoVanGrinsven managed to get the app installed and a greenwave node 6 paired. Gonna test it now to see how it works! THanks for the help!
-
MennoVanGrinsven said: @RobertLijkendijk git submodule update —init If you are using git No I am not, just downloaded the Greenwave app as .zip file and used the athom-cli to install it to my Homey. Are you aware of alternative update…
-
Seems to be yeah.... You also know how to fix it? Seems homey-zwavedriver is missing... Stack trace: Error: Cannot find module 'homey-zwavedriver' at Function.Module._resolveFilename (module.js:325:15) at Function.Module._load (module.js:276:25)…
-
MennoVanGrinsven said: RobertLijkendijk said: I am unable to install the greenwave app on my Homey running 0.9.1.... I thought z-wave apps where developed for use from version 0.9.1? install the greenwave app manually. downloa…
-
@HansieNL I think so, don't think that is gonna break anything
-
@MennoVanGrinsven cool, I'll give that a try tonight! Can you also get power measurements from the Node6 using the ap?? I've got 3 powernodes 6 and 3 powernodes 1 so really want to give this app a go