[App] Fibaro by Athom (v1.5.18)

Ronneman · October 2016

I hear some of you talking about upgrading the firmware of your Fibaro Z-wave devices. After some use of google I came to the conclusion that this is only possible via Home center 2, is this correct? If so, will this functionality ever come to this app or is it not "open" for external platforms?

bvdbos · October 2016

Fibaro didn't open their update-protocol for others afaik...

mranderson · October 2016

caseda said:

@mranderson, please try to re include it and see if that helps

No change, I'm afraid. Still "-".

Range testing (purple menu) shows a green light. I also have a socket (z+) further away which Homey reaches, so don't think its a range issue either. No issues with Fibaro door sensor (z) and socket (z)

caseda · October 2016

@mranderson I will look into it when I get home, there has been more problems with the signals of the sensor (it always would stay "no" even when alarm was triggered)

viktor · October 2016

Hi all, fibaro app is crashing here every time wenn i try to change settings in the relais modul:

Stack trace:

Error: missing_settings_key: auto_off_relay_1
at /node_modules/homey-zwavedriver/lib/ZwaveDriver.js:210:51
at Array.forEach (native)
at ZwaveDriver.settings (/node_modules/homey-zwavedriver/lib/ZwaveDriver.js:199:18)
at /homey-app/manager/drivers.js:207:21
at ZwaveDriver.drivers.(anonymous function).ready (/homey-app/manager/drivers.js:131:9)
at eventListeners.clientDriverMessage (/homey-app/manager/drivers.js:170:10)
at /homey-app/manager/drivers.js:26:41
at Object.Homey.ready (/homey-app/homey.js:1:1008)
at /homey-app/manager/drivers.js:25:11
at /homey-app/helpers/client.js:1:1013

Exit code: 1

Someone having tips how to proceed?

Robin · October 2016

@viktor ;
Which device are you using exactly? I'll fix it for you!

Robin · October 2016

Nevermind, already pushed the fix, .16 should arrive soon. Please let me now if any problems occur!

MartijnDeRhoter · October 2016

On a different note, is it possible to use both switches in a Double Switch 2 module?

cnvisser · October 2016

@MartijnDeRhoter I can use both switches with my FGS-222 (double relay switch 2).

MartijnDeRhoter · October 2016

Strange, mine only uses S2 - did you have to pair it twice?

Webster · October 2016

@athom any progress on the fibaro binary sensor

cnvisser · October 2016

@MartijnDeRhoter ;
Nope, i only paired it ones and got 2 devices.
They where named different.

MartijnDeRhoter · October 2016

@cnvisser ;
That's weird, I paired it just once as well and only got a single device, called "Fibaro Double Switch 2". Do you recall which version of the Fibaro app you had installed when you paired it?

cnvisser · October 2016

@MartijnDeRhoter ;;
Version .11, on a side note i have a double relay switch 2 not a double switch 2.
Those are probably two different devices.
They also share one z-wave id (5 and 5.2).

MartijnDeRhoter · October 2016

Ah

SizarKamar · October 2016

I have Fibaro FGD-211 and since there is an app for fibaro, it's not possible to add the parameter nr. 20 in the settings, it's an advanced parameter for enabling the change of control impulse length.
Is it please possible to add that to the app.

caseda · October 2016

@MartijnDeRhoter try reading the readme of the app before asking things

And there is a difference between your double switch (fgs-223) and double Relay Switch (fgs-222)

bvdbos · October 2016

SizarKamar said:

I have Fibaro FGD-211 and since there is an app for fibaro, it's not possible to add the parameter nr. 20 in the settings, it's an advanced parameter for enabling the change of control impulse length.
Is it please possible to add that to the app.

can't you add is as a raw parameter : 20,x,y where x is the number of bytes (see manual) and y is the value ?

MartijnDeRhoter · October 2016

Ah:

FGS-2*3 It's only possible to use Switch 1 (S1/Q1) because of a bug in homey, Switch 2 (S2/Q2) can't be used yet.

I'll wait for that bug to be fixed then, I can't be arsed to dig out that module to swap the cables.

ErikB · October 2016

range problemen
Sorry ik doe het even in het nederlands, Ik heb de bewegingssensor FGMS-01 van fibaro echter wat me opvalt is dat de dekking met homey veel kleiner is als met de hc2 ik kon eerst een sensor 25 meter ver hangen nu is die na 7 meter al buiten zijn bereik is dit een bekend probleem of,,,,,,,,

SizarKamar · October 2016

BasVanDenBosch said:

SizarKamar said:

I have Fibaro FGD-211 and since there is an app for fibaro, it's not possible to add the parameter nr. 20 in the settings, it's an advanced parameter for enabling the change of control impulse length.
Is it please possible to add that to the app.

can't you add is as a raw parameter : 20,x,y where x is the number of bytes (see manual) and y is the value ?

No that's my problem the app don't accept that particular parameter.

bvdbos · October 2016

http://www.fibaro.com/manuals/en/FGD-211/FGD-211-EN-A-v1.03.pdf
Are you sure you want to alter parameter 20?

caseda · October 2016

@ErikB ;;
there is a Big difference between homey and hc2.
homey has 5 (1 inactive) different RF based chips inside, which all can interfere with the other's frequenties. to make it as stable as possible you will give in somewhere, and that is the range.
It is still being tweaked for the best result without too much interference.

Z-wave has the ability for mesh network, so it shouldn't be a very big problem if you have any powered module in between.

Vertaling:
Er is een Groot verschil tussen homey en hc2.
Homey heeft 5 (1 inactief) verschillende RF gebaseerde chips, die allemaal elkaars frequenties kunnen beïnvloeden.
Om het zo stabiel mogelijk te maken moet je ergens wat opgeven, en dat is bereik.
Er word nog steeds ge-tweaked om het beste resultaat te krijgen zonder de invloeden te veel worden.

Z-wave heeft de mogelijkheid tot een mesh netwerk, dus het zou geen super groot probleem moeten zijn als je een op stroom aangesloten module er tussenin zet.

Fire69 · October 2016

I asked on Slack already, but the discussion got sidetracked to the bad speech recognition.
Anybody here with roller shutters?
If so, could you try opening them with 'doe de rolgordijnen (of rolluiken) open'.
Doesn't work here anymore since 0.10.3...

ThijsDeJong · October 2016

"Rolluiken omhoog" does work with me. But than again I also have "ghost-flows" in my Homey.

jovink · October 2016

caseda said:

@jovink hmmm the report didn't change, maybe because of the included optional temperature command class, try re adding it to homey (sorry if it is using in a lot of flows)

Last night I removed the sensor and re-added again. This morning everything was working but now it was the same as last night.
Again "-"

Aljoen · October 2016

Same here, command 'gordijnen open/dicht etc' does not work anymore. I use my own flow for that now..

SizarKamar · October 2016

BasVanDenBosch said:

http://www.fibaro.com/manuals/en/FGD-211/FGD-211-EN-A-v1.03.pdf
Are you sure you want to alter parameter 20?

Thank you @BasVanDenBosch I have the manual and I used to tweak the parameter 20, because it will let the gu10 led lights give less zoom sound. But the problem now with the app is that the app of Fibaro don't accept this parameter in the Raw settings

Robert · October 2016

@Fire69 , @Aljoen: This is a known issue in 0.10.0 - 0.10.3 for all window coverings, so not just Fibaro (https://github.com/athombv/homey/issues/638). A fix will be included in the next Homey update.

caseda · October 2016

@SizarKamar ;;
what kind of error is it giving you when you try to apply the raw parameter?
please show a screenshot of the (raw) parameter and error if you can

the parameter is not implemented (and won't be) in the normal settings for the very reason that it could make the module itself, or any device (even non z-wave) very closeby with the same input voltage wires, do weird things if you don't know what you are doing.
but should be possible to change it with the raw settings

[App] Fibaro by Athom (v1.5.18)

Comments