This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Closed Official
[App] Fibaro by Athom (v1.5.18)
This discussion has been closed.
Comments
It is a pretty old bug which should be fixed/work better in the next upcoming homey update
The parser is causing problems. Using it will result in unexpected behavior. I used it in my zwave.me driver and after saving sometimes the module died and the settings never get saved properly.
Jeroenvollenbrock confirmed it and his advice was to stop using the parser.
And if that's resulting in the fact your driver isn't able to save settings.... Then this is the fact of the.... Parser.
That is for the parsers that are used in parameters with 2 or 4 bytes, that will "crash" the module because the parsers only gives a 1 byte buffer (the language parameters work in) and not the required 2 or 4 byte buffer .
That is the one and only problem the parsers are giving.
Ok!
I have to check the calibration, save the settings, uncheck the calibration and save again, then it starts calibrating
lol, one of the few drivers written by athom.. oh well,
now at least we know the problem.
let me make a small (extremely tiny) pull request with that edit in the z-wave (capa) core, will make things a lot easier in the driver department.
then only 1 parser needed for all the (fibaro) drivers, yay!
This weekend I created my flows this weekend to automate the shutters.
Yesterday they didn't work, turned out to be a weird z-wave thingie, worked again after a reboot.
But that made me realize that with the current driver you can't see if there opened or closed.
I know support for controlling them by percentage is still underway, but would it with the current command classes be possible to see if they are fully opened or closed?
I will now try also with the raw configuration parameters to see this is working better.
Still have the same issue after updating Homey to v0.10.0 and the Fibaro App v1.0.11. Even after a factory reset of Homey itself.
tracked a bug in GitHub #53.
I have updated the FGS-223 driver, which could result in it including now.
Could one (or both) of you try it out?
if it still doesn't want to include (stops at association settings) and you know how to run it in debug mode, please do so
athom has one of their own now and is working on it, i have not had the time yet to look at it properly, there has been a change that (could) made it possible to add the temperature sensor(s) at least, but waiting on an answer for confirmation.
Yes but you have to help me to install it
https://forum.athom.com/discussion/1448/how-to-cli-install-method
In Github I cant find a updated version.
Edit: Is it allready possible to start a scene with the Fibaro dimmer v2 (button one, pulse)?
I cant find a option to start it. In the device parameters there is a option, 2x pulse is max light.
no there is no scene activation implemented yet.
the 2x to full brightness is being handled inside the module, the trigger is not being send to homey.
the updated version of the fibaro app is in the link i posted previously
@caseda
Get this error in the settings page with a red !.
Stack trace:
Error: Cannot find module 'homey-zwavedriver'
at Function.Module._resolveFilename (module.js:325:15)
at Function.Module._load (module.js:276:25)
at Module.require (module.js:353:17)
at require (internal/module.js:12:17)
at Object.<anonymous> (/drivers/FGD-211/driver.js:4:21)
at Module._compile (module.js:409:26)
at Object.Module._extensions..js (module.js:416:10)
at Module.load (module.js:343:32)
at Function.Module._load (module.js:300:12)
at Module.require (module.js:353:17)
Exit code: undefined
Alle my Fibaro devices are gone and cant find the Fibaro app in the device list.
After reboot:
Same problem
After power reset:
Same problem
_________
Edit: Tryed to install the drivers but get this error:
Edit:
Gelukt!!!!
You have to install this program then retry it!!!
https://git-for-windows.github.io
Adding the device takes verry long,
Stuck @: adding app-specifieke association groups
parameter added is 80,1,0. What am I missing?