Homey v0.9.1

LuukVisscher

Unfortunately, after the update KaKu doesn't work anymore. The devices ACD1000 are not responding. I already removed the KaKu App (and removed all devices) and reinstalled it after a reboot. But it is still not working. I am able to pair a kaka device, but it doesn't respond. :-(

RogierVanWijk

@Caseda: yes I did

mglat

Dimmer2 Fibaro devices not recognized  with 0.9.1 and added as basic device. BIG bummer. Most of my Zwave devices are type dimmer2




Relais switch (2x1) give same.

nteuniss

Same here. I managed to add the Fibaro Sensor, that seems to work ok, but I'm missing the support of the Fibaro Dimmer 2 to really do some testing. I hope that that will be added soon.

larsmachiels

Smartware devices do not pair anymore.

mglat

aseda said:

@RogierVanWijk ;
did you enable experimental updates?
Because 0.9.1 is just for the experimental channel right now

i did a factory reboot and it downloaded 0.9.1

JvdT

OK Solved it, remove the check mark "Download and install update" automagically and then check for update, install the update and tadaa the new version is available. Of course don't forget to turn on Automatic update again...

RobertLijkendijk

Updated my Homey, downloaded the Fibaro app, added my Fibaro Smoke Sensor (V1) and since then the Fibaro app constantly crashes (show the red ! mark in settings > apps).... *sigh*

caseda

@RobertLijkendijk ;
have you tried to power cycle? (pull the power plug and insert it again)

Reemster

i tested my Fibaro smoke sensors with real smoke/fire.. luckily there come alot of noise from the smoke sensor, but Homey did'nt received the smoke alert warning. (status no fire) I'm the only one with this problem? i shall test some more. 

robertbusscher

Yes! My Aeotec Smart Switch 6 is now working with de basic configuration! Great!!! 

phb

Can't  add a fibaro sensors because z-wave setting is trying loading regions. Anyone same problem? 

caseda

@phb ;
pull the power plug of homey and re-insert it

phb

Did that didn't  work for me 

KeepT

My Zwave.Me dimmer (ZME_0543) that used to work (at least as a switch) does not work in 0.9.1.

Reemster

never mind

phb

@Reemster ;Z-wave is still trying loading regions,that is why I can't  add a fibaro sensor.

JarnoBos

My experience so far:
- Z-Wave Fibaro Eye flow action is working again (finally i can pee again at night with the Hue light in the bathroom on 25% :-) )
- Adding Fibaro Z-Wave devices works as a charm, although must say that the Fibaro door sensor did not see the temperature sensor attached to it, have to investigate further
- KaKu stopped working after upgrade, removed app, rebooted and installed app, still not working. After removing power for a minute KaKu was working, succesfully added a remote (checked functionality with an Arduino and a receiver) just to be sure signals are sent

Reemster

phb said:

@Reemster ;Z-wave is still trying loading regions,that is why I can't  add a fibaro sensor.

Yes, i was to fast with responding. Maybe you must full reset your Homey? 

caseda

@JarnoBos ;
The temperature capability has not been added to the door sensor (yet) the same is for the smoke sensor.
So you will have to wait for athom to implement it as well.

caseda

@ all
for the power cycle, take off the power of homey for at least 10-15 seconds (more = better) but you don't need more then 30 seconds

RobinVanKekem

RobertLijkendijk said:

Updated my Homey, downloaded the Fibaro app, added my Fibaro Smoke Sensor (V1) and since then the Fibaro app constantly crashes (show the red ! mark in settings > apps).... *sigh*

Just added three Fibaro v1 smoke sensors without any issues about one hour ago.
How long did it take for the app to crash?

You could report your issue here https://github.com/athombv/com.fibaro/issues
And include the crash (hovering with your mouse over the red triangle)

RobinVanKekem

caseda said:

@JarnoBos ;
The temperature capability has not been added to the door sensor (yet) the same is for the smoke sensor.
So you will have to wait for athom to implement it as well.

https://github.com/athombv/com.fibaro/issues/5

phb

@Reemster  I did a full reset ,... z-wave still loading regions pfffff

Reemster

phb said:

@Reemster  I did a full reset ,... z-wave still loading regions pfffff

e-mail to support @athom? 

btwvince

I need to update the KAKU app but it's always saying something is wrong but when I try to remove the app to install it from scratch it disappears but after 1 sec it's back, I can't remove any app

Jaxc

btwvince said:

I need to update the KAKU app but it's always saying something is wrong but when I try to remove the app to install it from scratch it disappears but after 1 sec it's back, I can't remove any app

Logout from the AppStore. And do a new login. If that does not help then PTP and do a hard reset...

btwvince

JurgenHuijbregts said:

btwvince said:

I need to update the KAKU app but it's always saying something is wrong but when I try to remove the app to install it from scratch it disappears but after 1 sec it's back, I can't remove any app

Logout from the AppStore. And do a new login. If that does not help then PTP and do a hard reset...

I had to unplug it twice before that worked but now it has been updated but can't add any new KAKU device. Not by the remote or pushing the connect button

MennoVanGrinsven

I really wish athom would finally release a working KaKu app. My AWMR-230 and AWMD-250 are still not working. Now even Chromecast is broken. I was pretty happy up to firmware 0.8.35. KaKu was working great then.

RobinVanKekem

MennoVanGrinsven said:

I really wish athom would finally release a working KaKu app. My AWMR-230 and AWMD-250 are still not working. Now even Chromecast is broken. I was pretty happy up to firmware 0.8.35. KaKu was working great then.

But Z-Wave wasn't, and now it's better for me...
I'm sure it'll all work out in the end of your patient enough.