This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
RDtimmer
About
- Username
- RDtimmer
- Joined
- Visits
- 232
- Last Active
- Roles
- Member
Comments
-
Caros said: @RDtimmer, thanks, that worked! Only thing that doesn't seem to work anymore is battery status, how is that on your side? Same for me. I guess that's something @mruiter needs to look into.
-
Caros said: @mruiter, I was too fast unfortunately. I miss the trigger flows. For my Z-wave POPP Smoke detectors I can't make a trigger card: 'If alarm went off'. So basically the smoke detectors are unusable right now... Turning alarm on/and o…
-
@tonvos6 not sure why that doesn't work, but I did it this way: Add a device somewhere, then under Add a Device, you should be able to click Ubiquiti Unify: On the next screen you should be able to select your OnePlus as Wifi client. You can use t…
-
mruiter said: Could you try a re-inclussion just to be sure...... (Doggy face) YESsss, @mruiter it works, you did it!! Thanks you for your efforts in resolving this. Since for other Popp devices the same procedure may apply, I am goin…
-
@mruiter Overnight Homey updated to 2.0.4, I am still unable to use the smoke detectors as input flow unfortunately however. Would you -or anyone else- happen to know if I need to re-include the smoke detectors? The Zwave mesh in settings it still l…
-
@mruiter Thanks, I'm going to try as soon as it is available, and let you know the outcome.
-
Nope, I am still unable to add the Smoke detectors to a flow I am willing to participate in troubleshooting, just tell me what to do, I am able to have a look at it either tonight or tomorrow afternoon/evening edit: just checking, these 2.x driver…
-
mruiter said: @RDtimmer are you on slack so we can troubleshoot ? Battery status now comes in only when device reports so it can take a day. My popp valves only report in once a week with battery Not on slack currently... how/where can…
-
Ok, I jumped on the beta 2.0.2 wagon, and I can report two findings with the smoke detector: Smoke detectors cannot be selected as input device anymore, only output(alarm): (so I have some broken alarm flows right now indeed) Also the (backup)…
-
Do I have to re-include devices (smoke alarms in my case) if I switch to the beta version? Bit hesitant, since I have to remove them all from the ceiling in that case.
-
mruiter said: The 1.1.5 update is already awaiting approval to fix the problem. I dont have the smoke detector so i cant test. Its all based on guessing and the manual. Please run the app in debug mode on the driver and send me in the reports …
-
I have some bad news unfortunately, the Popp app is crashing on my Homey, and refuses to start now, this happened immediately after it updated to v.1.1.4 Tried restarting Homey, and restarting the app without any luck however. On another note: I wa…
-
If you have an Android phone with Android marshmallow or higher, you can get all this functionality without having to purchase a Google Home device, I have been playing with this. The downside (for me) was that I had to set my Samsung Galaxy S6 to …
-
I recognize this, because I was feeling the same when starting with Z-wave devices. Testing must have been done in a vacuum without interference from Wifi,4G or other radio signals... To get around the issue I have installed Popp Z-wave smoke-detec…
-
Should it still be operational? I have been trying for two days now, paired it twice, but it is dead silent, not a single response. Tried naming the flows: nothing whatsoever. You have any suggestions maybe?
-
caseda said: @RDtimmer you probably need to re-include it to homey to have a new capability added (the metering) And don't include it as a "light attached" if you want the metering in the mobile card also. (now only in flow cards and insights) …
-
OK, that is the problem @caseda? to not include it as light? I will try that ASAP when I get home!
-
Hi @aloft, zie hier zoals het er bij mij uitziet(vrijwel identiek): De schakelaar is hernoemd, maar dat mag niet uitmaken toch?(daarvoor deed hij het ook niet overigens) Lijkt wel of deze defect is, of zich gedraagd als een versie zonder "meteri…
-
The power metering in the AN181 seems to be non-functional(re-added the device a couple of times), should this be implemented I will definitely buy you a glass of whiskey
-
Same here, all Philips Hue devices show up as unreachable, reinstalling app is the only remedy? I am bit reluctant to do so, since I will have to create all flows again in that case There should be a backup-restore option or an option to repair f…
-
@mruiter Yesterday I installed all Popp smokedetectors, hardwired to 230V, while intially they had some problems being included in the Zwave network, they are now working great: Thanks a lot for your awesome work!
-
On the AN181 wallplug the power metering is not implemented yet it seems. Are there any plans to have this implemented in the future?
-
Thanks for the good news @mruiter and @phil_s @phil_s May I ask, are you also using mains power(230V power supply) or are yours battery powered?
-
Awesome @mruiter ,I am going to give this a try, as soon as they arrive
-
Thanks for the tip lubbertkramer! (unfortunately these detectors are not on the list / in his app yet)