This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
gijsje
About
- Username
- gijsje
- Joined
- Visits
- 637
- Last Active
- Roles
- Member
Comments
-
I know the xiaomi devices can be connected directly to the homey but why is the xiaomi gateway not use as a "gateway". If you look at domoticz there you only need to connect the devices directly to the mi home app and gateway and you can use them. I…
-
Dat komt ook pas ergens in december is nu alleen nog maar zoeken
-
I have lost all kaku devices from homey after the update I did have them add all again and edit all the flows again, not a happy person at the moment
-
Misschien kan je ook een 2e keer de omlaag doen maar dan na 10 seconden dan is net alsof je na 10 seconden weer op omlaag drukt en dan zou hij moeten stoppen lijkt me
-
i was doing something similar with a door switch from xiaomi to make into a doorbell but when i wanted to install it and control my kaku doorbells they changed the app and the doorbells are not working anymore. So i need to wait unitl it is fixed A…
-
Ik ben me steeds meer aan het ergeren dat zo iets simpels als 433mhz niet gewoon werkt. Ik had eerst ook Domoticz op een nas staan met rfx.xom en werkte gewoon altijd. Het nadeel van domoticz was dat het nooit geheel stabiel was en dat je altijd er …
-
Arie_Laxed said: The Virtual Selector could be implemented with an enum, but then I would need the enums from all users up front. The only way to implement this was with a multi-mode. Would that be suitable for you? Got it working with multi…
-
Yes i do mean a slimme meter. I do forward the data from my domoticz install to homey and that works I only do not have a nice device in Homey to show the current power consumption and the total power of the meter. I can see the in better logic
-
i use my desktop computer for this https://ifttt.com/
-
I have no problems with it
-
as i did say before google assistant in dutch can only answer questions and not do any home control. If you want home control you still need english and wait until some time in December
-
google home is not yet in dutch only google assistant I just ifttt to control my home works great
-
You can not use any home control commands yet only normal google questions
-
Would also be nice if there would be a virtual P1 and virtual selector switch
-
Rocodamelshe said: gijsje said: Yes i do now this but will the ikea stuff work with the xiaomi stuff to make a mesh? Yes they will! Thanks i will give it a try
-
Yes i do now this but will the ikea stuff work with the xiaomi stuff to make a mesh?
-
I have about 10-15 xiaomi zigbeer sensors and want to make a mesh network to make it more stable. What is the best way to make a zigbee mesh network. Can it be with the ikea even if i only have xiaomi products? The only power device i have is the hu…
-
Works great now we have to wait until Dutch is availible
-
I have never used node red or mqtt yet but was always interested in it. Now this is good reason to try it out. i do not realy have clue yet how it works yet. I have installed node red on a pi and it works. I have installed the mqtt on the same pi an…
-
Ik heb het een keer gehad dat op het moment ik een nieuwe wou koppelen er iemand langs bewegings melder liep en homey toen dat signaal pakte. Misschien zoiets?
-
I was also thinking of getting one for when the water leak sensor find a leak to close the valve. But then you would only need the close circuit to be powered when there is a leak detected. This way the valve would not be powered all the time and ma…
-
I would never use 2 switches as this is a big risk what if the signal to turn the first one of it not received and it is still live if the other one turn on you would burn the motor inside the valve
-
they are rated at 250VAC 10A so thats finw
-
They are cheap enough to give it a try Here is some info to setup the wifi one https://www.letscontrolit.com/forum/viewtopic.php?f=6&t=3245&start=130 I today finaly did get it working with a 2 relay board. I needed one of these to programm …
-
With the wifi version you need to a little setup sometimes but then you can just use http commands The 433 version i do not know as i do not have but i guess it should work somehow
-
You can use this with 433mHz Or this with wifi
-
@rtna Thanks i only ordered one this morning but will keep it in mind
-
I think he means that the desk lamp is not in the devices. That was also the reason i did ask
-
Phuturist said: Latest version - 2018-06-05 -- v2.6.5 * NEW: add support for Yeelight Desk Lamp Is this this desk lamp? Desk lamp on ALI
-
I have just changed back from a hacked toon to my otgw as the toon does not work with Homey. I only have an issue with the otgw that it is not updating any value. It did put in a value when installed the app but not after that. It does update the se…