This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
k1s
About
- Username
- k1s
- Joined
- Visits
- 254
- Last Active
- Roles
- Member
Comments
-
OK, thanks to third party developers, this lock now has basic (open-close) support from this app: https://apps.athom.com/app/com.yale.lock Their app will also report who opened and closed the lock by reference to the number (slot) that the admin h…
-
Bram said: @DaneeDeKruyff here is the link: https://blog.athom.com/behind-magic-june-2018/ I think DaneeDeKruyff was pointing out the July blog update was apparently overdue
-
I don't recognise the screenshot, but what I mean is this... As I understand it, your valve is designed to have a thermostat operate it as if it is a toggle switch, wherein the live signal is flipped between the cables labelled 3 & 4 in the dia…
-
I can't see properly your last 2 posts. Did you switch one on and one off at the same? Or just Q1 on and then Q2?
-
Are you using a flow or just flipping switches in the homey GUI/app? I'm guessing you need to switch Q2 on at the same time as switching Q1 off to properly achieve a 'close' command, and vice versa for an 'open'.
-
So according to the diagram... q1 to 'Blue (3)', Q2 to 'Brown (4)', neutral to 'Color N(2)', and N on the fibaro, and live to L on the fibaro?
-
fke1964 said: fke1964 said: this is the drawing of the valve this is the drawing of the switch, i did't atach a external switch so S1 and S2 are empty ...and what have you connected to what ?
-
fke1964 said: k1s said: fke1964 said: I have reveived my fibaro FGS 223 yesterday and connected it this morning. Problem is that when i set the switch to off the ball valve closes. After a few seconds it opens again and stays …
-
fke1964 said: I have reveived my fibaro FGS 223 yesterday and connected it this morning. Problem is that when i set the switch to off the ball valve closes. After a few seconds it opens again and stays open. What am i doining wrong? i have trie…
-
I think Louis28 said: I am curious how it is with the new app. every last Friday of the month there would be a blog right? Is there a community manager who might shed some light on this?
-
fke1964 said: k1s said: I did something similar for a garden tap with ta fibaro z-wave dual relay. The ball valve I started with had an integrated controller which meant opening closing needed 2 signals to effectively switch. With Fi…
-
I did something similar for a garden tap with ta fibaro z-wave dual relay. The ball valve I started with had an integrated controller which meant opening closing needed 2 signals to effectively switch. With Fibaro module you can specify the amount…
-
lubbertkramer said: For now the beta that you get from signing up from the startpost is the most recent version that is public for everyone... Wait, so there is a "beta" that is available by "signing up" (whatever that means) that is different from…
-
lubbertkramer said: marcelwolf said: @Bram, is it possible to test a beta version of the mobile app? Did you read the very first post of this topic ? Be fair. Sometimes you all refer to beta, other times 'preview'. It's …
-
Hello I'm trying to turn off underfloor electric heating if the window in the bathroom is open (using a sensative strip).Could somebody who knows how the app works tell me if that can be made to work that the schedule is resumed when the window is…
-
I still don't know what the error meant, but I managed to get rid of it by changing the order of the cards. Now in the then column it goes: Turn on: Garden Tap Open Turn off: Garden Tap Closed Set a textual variable 'Garden Tap': 'Open' else Turn…
-
k1s said: Hello I'm confused about how to set the surveillance mode. The instructions say: Create a Surveillance Mode Switch... and then further down: ...Create a flow to enable the Surveillance Mode Does the switch have to be set to 'arm…
-
It does seem to be connected. Do you know what the invalid command class thing means?
-
Hello I'm confused about how to set the surveillance mode. The instructions say: Create a Surveillance Mode Switch... and then further down: ...Create a flow to enable the Surveillance Mode Does the switch have to be set to 'armed' and a flow …
-
Could somebody (with patience) help me with a flow to dim 2 LED strips from one RGBW module please. The modules are wired like fig 7 in the manual - 2 sets of lights (in my case white LED strips): caseda seems to indicate that it can be done ca…
-
Herman2604 said: ...its only based on humidity , because thats the main reason the ventilation is running, I dont know if this is of any help? Kind regards Thanks but not really - I'm trying to base it upon both occupancy and humidity bec…
-
Thanks @JPe, I got one and got it working. Now I'm wondering how best to configure it in flows. The relay is controlling a garden tap, with a ball valve controlling the flow of water. I'm effectively toggling both channels (Q1 and Q2 on the rel…
-
matrover said: k1s said: k1s said: Trying to add a second Aeotec Multisensor 6, adding falls over at “Setting default association groups”, then “No Z-Wave device has been found.” Try to add it again. “This device is alread…
-
@JPe Thanks that looks good. Are you familiar with this device? I'm just wondering if the PCB is normally powered by 2x AAA batteries, but the relay is rated at up to 6.5A per output channel and 240v AC, will it work?
-
Rocodamelshe said: My guess is it’s the same. My dimmer2 says "Is aan" in Chrome, "Is turned on" in mobile app. So same card, different translations. Yes, semantics, I know but "...is turned on" and "...is on..." are not the same in Eng…
-
JPe said: You could add an extra "If ON" card, so it only is switched OFF when it is ON Out of curiosity: In your Dutch version your card seems to translate to 'Is on' which implies a state, whereas in English it says 'Is turned on' whic…
-
@JPe - Thanks. I think that's the solution I'll go with for now although it still leaves the question of efficiency (see edited first post)
-
@cbh Thanks for the explanation. I guess in my case (I just want to switch it off if it's below a certain threshold, and the room is unoccupied so I homey doesn't need to know about the direction. I believe the the magnitude of change that trigger…
-
JPe said: @k1s maybe this is a solution? Translation: Moisture is changed smaller than and no-movement then turn off Thanks - that's what I tried, but it turns out that it tries to turn off the fan even aft…
-
@cbh cbh said: Flows for controlling a fan in the bathroom based on the humidity. Setup: Hardware: - Aeotec Multisensor 6 (mounted in the ceiling in the shower niche) - Fibaro Double Switch 2 (controlling a "stupid" fan). Variables &…