This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
_Marco_
About
- Username
- _Marco_
- Joined
- Visits
- 257
- Last Active
- Roles
- Member
Comments
-
Software updates and history Many of you wondered what is included with each firmware update. To that end we are publishing the change log in our Help Centre. Smoke detection and Point When we started the campaign for Point, we also initiat…
-
I solved my double and unwanted second logging and actions by not reusing the Camera-Motion part, but used 2 different ones. At that moment it started working again (no need to change the flows). http://192.168.10.XXX/api/app/com.internet/whit…
-
Trigger itself until the alarm is off? Alarm -> trigger disco lights. Discolights has change, when alarm is on , lights on, 10sec later lights off, 10 second later trigger Discolights else do nothing.
-
DaneeDeKruyff said: _Marco_ said: Thats awsome! Thanks. I’ll wait for the release. You can now use Virtual Devices with the alarm_motion and alarm_contact with Heimdall: https://forum.athom.com/discussion/comment/75265/#Comment_…
-
Who can add a Minut Point to Heimdall? https://forum.athom.com/discussion/937/point-minut
-
I have now several Points model MT-P2 (latest model) on my desk and I can send one it to someone who can make a program for Homey. I can sell one to a beginning developer or donate one to a serious developer (proven to have programmed apps before…
-
Werkt bij mij ook stabiel voor langere periodes nu, soms moet ik wel de App of Homey een reset geven om het weer aan de praat te krijgen. Maar sinds kort laat ik via Candy App de Homey elke week een keer herstarten (vanwege andere redenen dan deze a…
-
@DaneeDeKruyff
-
@DaneeDeKruyff Nice it works Thanks! For all others, a PIR has a value 0 or 255, zero for no detection and 255 for detection (thats wat a fibaro PIR is telling me) The doorbird is also found btw.
-
Because its not supported? follow the link and there are only 4 sensors supported and alarm_motion is not one of them. Unless its an alarm sensor from alarms and not sensors and is a different one. But I could be wrong.
-
Thats awsome! Thanks. I’ll wait for the release.
-
_Marco_ said: I tried to create a VIrtual Device which can be used by Heimdall, but Heimdall does not recognises the device I create. I tried the PIR (movment and on/off switch), both are not recognised by Heimdall as valid devices. Is i…
-
I have a question, and I thought that this worked in the near past ok, but now not any more. I have 2 camera's connected to my Synology, for both camera's I use an http action with an different name in it: http://192.168.10.XXX/api/app/com.interne…
-
Owntracks app with mqtt? I use the location service in my Tado app, for me it gives the most stable presence.
-
I tried to create a VIrtual Device which can be used by Heimdall, but Heimdall does not recognises the device I create. I tried the PIR (movment and on/off switch), both are not recognised by Heimdall as valid devices. Is it possible to add t…
-
Is it possible to add the Doorbird motion detection to the Homey alarm_motion capabiity? Then Heimdall can use the motion also for alarm detection. If your Doorbird doorbell doesn't show up in the settngs page of Heimdall it's motion detectio…
-
If I was Athom, I would take your source code , analyse it if it fits there purpose and continue from there, including the main developers of this app. Several scenario's possible including paying the current developers and or taking the source to …
-
Same error again: Too many memwarns received Usage:125MB This is the Candy app which notifies me from an app restart. And Homey which tells me that the tado app is crashed.
-
Update to 2.0.1 and I get a app failure, restarted the app, still in the app list, but all pairing is lost between Homey and Tado. And I only can add the Home and hot water zones, no tado room zones are found. In the release notes nothing about…
-
_Marco_ said: For now I solved my problem: - Doorbird has not yet the possibility to select small portions of the image for motion (only large tiles). - I use SurveillanceStation on my Synology NAS to send me E-mails when something moved on a …
-
If replying to a post above your post, please don't use the quote button (i keep scrolling)
-
Ik moet zeggen dat ik tot nu toe weinig problemen ondervind. Ik heb 1 lamp die niet erg wil, maar de andere lampen (zelfs een setje van 3) blijven werken via de gateway. Lijkt erop dat met Homey versie 1.5.11 de verbinding stabieler is geworden.…
-
For now I solved my problem: - Doorbird has not yet the possibility to select small portions of the image for motion (only large tiles). - I use SurveillanceStation on my Synology NAS to send me E-mails when something moved on a Camera, with the p…
-
For now I solved my problem: - Doorbird has not yet the possibility to select small portions of the image for motion (only large tiles). - I used already SurveillanceStation on my Synology NAS to send me E-mails when something moved on the Doorbird,…
-
Did they give a time frame when this API will be published? I now get notification from everything the doorbird sees, to much information
-
Strips by sensative, the invisable window and door senso with a long-life battery for 10 years. Less than 3mm thick.
-
Phuturist said: Ezdada said: Phuturist said: Ezdada said: uhm, sorry for the noob question re: Xiaomi Gateway V2: I want to add the device, - where can I find the Token - and what should be the polling frequency …
-
o.m.g. I totally overlook that menu item Thanks! (still learning...)
-
Ook even een pm gestuurd voor de alpha toegang om te proberen.
-
I see that my question is not clear enough (and was typed on a smartphone), pictures to make it more clear: I have defined a number variable in Better Logic: And want to put the content of this variable Temp_Garage_Temp in Simple Log: …