This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Caros

About

Username
Caros
Joined
Visits
381
Last Active
Roles
Member

Comments

  • @Torrfura Can you tell whether the Robot Vacuum s50/s51 is working correctly now? Is the problem solved, or is this not workable with the Homey?
  • Hi @NoClaim, I have a kind of simular setup, but I'm using the relay switch. But I also have 3 options.  Lowest: Q1 is off and Q2 is off Middle: Q1 is on and Q2 is off High: Q1 is off and Q2 is on I have multiple conditions: - Default is 'Lowest',…
  • Just updated, went fine! Anyone knows why at developer tools the Z-wave network drawing isn't showing?
  • @RDtimmer, thanks, that worked! Only thing that doesn't seem to work anymore is battery status, how is that on your side?
  • My apologies, didn't saw that part of the text.
    in Homey v1.5.7 Comment by Caros March 2018
  • @mruiter, I was too fast unfortunately. I miss the trigger flows. For my Z-wave POPP Smoke detectors I can't make a trigger card: 'If alarm went off'. So basically the smoke detectors are unusable right now... Turning alarm on/and off in the 'then' …
  • @mruiter, I've just installed the beta (again). Now the app doesn't seem to crash anymore (5 minutes running now ). Will let you know if any issues regarding to the smoke detectors appear, but so far this update seems to work fine! And thanks for t…
  • Does anyone knows how much time between these distributes waves is? It's 1.5.7 has been released for more then 1.5 weeks now and it's still not showing? How long is the prediction that all the waves are rolled out?
    in Homey v1.5.7 Comment by Caros March 2018
  • @Rebtor, great work thanks! I've just updated, seem to work stable. If I'll find any issues, I'll let you know. Regarding to the Gas meter: This sounds like a decent implementation, since the Gasmeters only sends his meter value twice an hour. The …
  • @mruiter @RDtimmer, have these issues regarding to the smoke detector been solved? I'm waiting to update, since I don't want to lose functionality
  • Hi @TedTolboom , I've finally received a new MCO Home CO2 Sensor from China, it took a while...   Anyway, the bouncing between 2000 and 10000 PPM seems to be gone after a first test! The only thing that doesn't seem to work is the CO2 Alarm. I've…
  • I'm still using stable version 1.5.3 (on purpose, want stability), could that be the reason?
  • @mruiter , just tried the newer version from the BETA app, still get sort of the same error: This is the stack trace: (node:23344) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 __appInit listeners added. Use emitter.s…
  • Hi @Towanda, The issue is the following: Your motion sensor doesn't always send an luminance change update. This is only happening if a certain treshhold has been passed. This means that exactly at either 23:30 or 01:30 you're treshold has been 'hit…
  • @bvdbos, I know, but it still seems a problem. Running latest stable version 1.5.3. Would love to see the ethernet option working, but I think that will never happen... Results from ping are really bad: Pinging homey.---------.net [1.2.3.4] with 32…
  • @mruiter , I've just received two smoke detectors with sirene. When I install the beta version it crashes once I've added the devices. Unfortunately, the app crashed while I was doing the following: (...) This is the stack trace: (node:3493) M…
  • Has there been an update on this one? I see the same high pings, but the Homey is connected to a (non-mesh) access-point nearby.
  • @robertklep, it really depends. It can be within a minute or within hours. This weekend I've made the following flow: - If I want to have the lights on set boolean on true - If I want to have the lights of set boolean on false - If boolean = true, e…
  • @robertklep, It's not working stable for me. Once paired I'm able to control the Sonoff, but after a while not anymore. Rebooting the Sonoff solves the issue for a while, but it's not stable At the moment I can ping the Sonoff (gave it a static IP)…
  • Yes, just tested. It's great. Whether I press the physical button or the RF button, within a second Homey changes the state. Well made!
  • Thanks for the quick responses! Can also confirm that it's working for the Sonoff RF
  • @robertklep, yes everything was fine. This did the trick for me. Wireshark sniffing helped me curl --data-ascii @pair.json -XPOST -H "content-type: application/json" http://10.10.7.1/ap I was thinking why it should be binary, when it is ASCII tex…
  • @robertklep, thanks for all your quick responses. Today I tried it with the 'old' Sonoff RF and a brand new 'regular' Sonoff. I can't get the POST message override the values on both of the Sonoffs. I get timeouts, while the curl for device info giv…
  • Still no luck yet. Route change not necessary, since there is an IP connection. I can also see this with netstat: >netstat -ano | findstr 10.10.7.1   TCP    10.10.7.2:35116        10.10.7.1:80           ESTABLISHED     12484 Curl to device page…
  • @robertklep, great idea from the app! Just tried it, unfortunately it didn't work (yet). Tried it on the Sonoff RF module. Did a factory reset, was able to connect to connect to the ITEAD-10000xxx Wifi and got an IP-address: 10.10.70.2 and was able …
  • My comment 'disappeared' to the closed topic, probably stuck in between the discussion... Therefor my question again. The new Sonos (Sonos One) has native Alexa built-in. Should this also work with the current Alexa skill? Does anyone has experie…
  • For me this app unfortunately wasn't reliable anymore. I've now made my own solution: My NAS does a ping to the devices and immediatly afterwards it checks on a valid MAC-address in the arp table. These values are written to a MySQL database if a ce…
  • I've used a P1 cable which I connect to my Synology NAS. On this NAS al the values are written to a MySQL database via a Python script. With the MySQL app on Homey (https://apps.athom.com/app/nl.rebtor.sql), I connect tot this database and have the…
  • Can the Alexa skill also be used from within the new Sonos ONE, which has native Alexa integration? Or does Sonos has anything 'in between'?
  • I have the same issue. One Phone working perfectly and the other keeps being offline. In the logs both phones are appearing and disappearing all the time: : Can't find device. : Found device. : Can't find device. : Found device. : Can't find devi…