This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
vk900
About
- Username
- vk900
- Joined
- Visits
- 56
- Last Active
- Roles
- Member
Comments
-
Pieter said: I just installed the Qubino ZMNHVD1 Flush dimmer 0-10v to my Buva Q-stream. Set Homey to connecting mode (Qubino app) and put the power back on the system. Worked like a charm! Everything together took like 15 minutes. Awesome! …
-
Roephoed said: Phaeton said: Since the update three of my z-wave devices seems to turn on and off randomly. I disabled all related event and Added logging at device change, but when they switch I dont see it in logging. I will look i…
-
Uhhh... looks like IO is supported but then via a Somfy Tahoma Box.. (guess this is like Philips Hue that needs a Hue bridge in between as well) Anyone got experience with this?? https://apps.athom.com/app/com.somfy.tahoma
-
danone said: I went for Somfy non-RTS and the Fibaro roller shutter 2. It works superb! Sounds like the cheapest solution however, I noticed that you are unable to add any wireless sensors (wind sensor) to a non-RTS system. Still think…
-
tompa12345 said: Hi, I desperately need support for the Qubino ZMNHOD1 - can it be added? tranceblast said: Support for Qubino Shutter DC? This has been requested since end of October 2017 via the off…
-
Still got my ZMNHVD1 laying around as I understand how to connect this (instead of the wired wall unit) but I don't know how to add it together with the wired wall unit. I basically want to be able to use both options to steer the Buva unit
-
Are all the Fibaro problems that are reported here recoqnized by Athom?
-
While reading through the comments I think that I will wait to go to 1.5.8 (currently 1.5.3)
-
As an update on this, this is supposed to be fixed in 1.5.6 which will be released sometime
-
Pieter said: I just installed the Qubino ZMNHVD1 Flush dimmer 0-10v to my Buva Q-stream. Set Homey to connecting mode (Qubino app) and put the power back on the system. Worked like a charm! Everything together took like 15 minutes. Awesome! …
-
Well what I can remember is that you need to things in specific order and quickly.... note sure but I finally got it to work while going to the discussion in the Github.
-
I now see that the above link was not working. This is the correct link and in there is a solution/workaround to get it working
-
I've narrowed down the log to this, in this timeframe im walking through the steps above and wreck the whole stack So assuming the keyfob is node(25) it looks like it is getting the new settings pushed but no reason why the whole homey needs a rebo…
-
Sorry for the delay, so what I did: -Reboot Homey (so we have a clean starting point) -Verified I can turn on/off single fibaro switches and wall-plug = okay -Opened KeyFob settings -Changed settings that I wanted to change (Button Settings) -P…
-
maartenv said: And? Is it already fixed maybe? yes resolved as communicated earlier on
-
BTW I know the Aeotec Garagedoor Controller but I guess there should be a way easier and cheaper solution with another simple pulse module?
-
Okay, i troubleshooted some things and maybe it's a reception kind of thing... 1) I couldn't delete the device from Homey so I disconnected it, took it to the living room, powered the module on and deleted it from Homey successfully (using the opti…
-
Hi Caseda, have you read through the Github issue I created? There's a send log code in there directly after I "crashed" it. What I mean by crashing is that I can "hang" the Fibaro stack (reproducable) in a way non of my Fibaro devices work anymor…
-
As there are a lot of KeyFob users here, did you guys enabled the Single, Double and Triple click options? I cannot get this to work, in fact, I'm able to completely crash Homey Fibaro module while trying to.. I've created a ticket on this one: htt…
-
hmmmmm interesting.. I thought that I could either use the dimmer on the wall or the Fibaro.. In my previous house using ancient X10 modules this just worked. Well.. at least I got an answer now Thanks guys
-
steinis said: Same problem here. In general I feel that the z-wave part of homey is slow and a bit lucky if it works or not. I have only Two motion and two dimmer 2 for testing. Before I do the changeover I need to know that the simplest ting w…
-
check this out: https://github.com/athombv/com.fibaro/issues/175 And a short summary of what I did troubleshooting this: -reboot Homey -Verified I can turn on/off single fibaro switches and wall-plug = okay -Opened the Motion Sensor 2's config sc…
-
Roephoed said: fiek said: I want to switch off the Motion sensor plus LED setting in the room of my daughter. My wife gets annoyed by the LED's blinking in the night when she is feeding our daughter. I have set the setting on inact…
-
I've created issue: https://github.com/athombv/homey/issues/1864 for this.
-
I've created: https://github.com/athombv/homey/issues/1848
-
lubbertkramer said: bsmit said: Hi, Trying to connect my Smart Alarm device but Homey is not showing a pop-up while my pop-ups are check ON as allow in my browers. What to do? It's good to talk about these issues on the forum but i…
-
I do get a pop-up asking me to first logon and secondly to give Homey access to status from Smart Alarm. After that nothing happens and nothing new is available..
-
So I found some reproducible behavior: Since Homey 1.5.3 they fixed the description fields (as it a appears) so you can actually see the full name of a device: In my case I got a white Door/Windows Sensor 2. This is important to note as the websi…
-
vaderag said: Just to add to the above I have tried unpairing, re-pairing and installing with each of the three 3 different Door/Window Sensor device options and one of them didnt work (no battery reading) but the other two seemed to work fine …
-
vk900 said: caseda said: @vk900 did you by any chance changed any of the settings? and disabled the "turn off sabotage alarm" setting or changed the time for the cancellation. if not, then try to change the corresponding setting to an…