This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MennoVanDerAat
About
- Username
- MennoVanDerAat
- Joined
- -
- Visits
- 35
- Last Active
- Roles
- Member
Comments
-
@hnijveen Did you at the end manage to get both lamps working (on/off and dim/bright) And can you still manual use the lights? I want to buy the parts but I'm not sure what I have to buy argghhh
-
Hoi @Priknr1 , Should it already work? or does the app still needs to be updated? I tried it this morning and it still doesn't find the device and add's it as an unknown z-wave device If the app still needs to be update no problem I wait for it th…
-
Also when I fill in the correct group number and push the save button it keeps waiting or so for something but it isn't saving --> edit Restart zwave chip seems to fix the not saving problem
-
My two zwave motion detections lost again there group membership. This is already the third time this is happening
-
aloft said: RikPost said: Anyone else having problems with freezing Homey? After about 8 hours Homey stops working and only a power cycle will bring it back online. I will also try a full reset to see if that will solve this issue. …
-
Indeed I have 14 flows just to manage 2 lights with motion detection don't want to recreate. First test after upgrade and a reset was voice training was not working for me tried 10 times and had 0 green
-
Jorden many thanks installation went fine will test later
-
Added 7th flow to stop the counting after 60 seconds Now have my kitchen and studyroom under controle very nice!
-
@Fire69 If it's working I wouldn't do it. With the first version of this app I also had an error but everything was just working fine. This time my installation was on a clean homey (first app)
-
Just did installation from app store and received NO error
-
@aloft ; I got the first part working only thing is my sensor alarm resets after 60 seconds so all motion within this 60 seconds is ignored. I changed the time from 60 to 120 and now when I move after 60 seconds the timer is resset to 0 Now going f…
-
@aloft Sounds great (a lot of flows ideed but heee if it's working) Will test this tomorrow do I have to do something on the settings page of homey for better logic?
-
quote Dear Homey owner, Today we performed a major upgrade to our cloud services which partly replaced the old infrastructure. The update is completed now, but there may be a chance that your Homey is temporarily unable to connect to this …
-
Now that I have my motion working with my lights I'm wondering how to fix the following: 1. after reboot my lights always start at 0% brightness (is there an option to set default brightness to 50% or so) 2. after motion detection lights go off aft…
-
I skipped (none) it in the wizard I changed it after wizard
-
@jorden after chanching group 3 with value 1 you have to sync settings by clicking 3 times on the button of the motion device (to make sure do this close to homey If it works you see alarm on after movement and after 20 seconds it should change bac…
-
@Fire69 The problem is that I don't know how to reset the zwave.me ZME_05433 http://manuals.zwaveeurope.com/make.php?lang=en&type=&sku=ZME_05433 I can remove the device from homey but when I do a new detection it's finding something but I …
-
+1 for the idea
-
Toppie!!!
-
After some heavy fight (zwave 3 - me 1) I've managed to create two flows with motion detection: 1. On motion (FIBARO MOTION SENSOR FGMS-001) turn on lights (zwave.me ZME_05433) 2. On no movement (FIBARO MOTION SENSOR FGMS-001) turn off lights (zwav…
-
strange the one I placed close by is showing only temp after 9.42 motion detection still seems to work okay (long and short distance)
-
-
battery = 100% OK (both) luminance = 6 and 0 steady (and no I don't life in a cave lights are fully on) tempeture = 23,3 and 23,5 steady (it doesn't seem to change) Maybe a distance problem I moved 1 close to homey (1,5M)
-
@Fire69 I hate it when you're right ;-) Just did a new pairing with 2 motion devices both without any parameter and only group 3 = 1 and both are working
-
hmmmm not sure have it from somewhere in this forum
-
@Freek Sound like a bug like Taco is mentioning (fixed in 0.8.23)
-
For others maybe having same problem what I have done is: Group 3 = 1 Data 5,1,2 On motion device press 3 time button After that I see alarm going on and off after motion detection Edit --> Data is not needed
-
Fixed!!!! Indeed in group 3 put 1 and data 5,1,2 and now motion detection is working Edit --> data was not needed just leave it blank
-
Okay so it is 1? I was confused with name where it says Node id = 3 MennoVanDerAat said: Problem getting motion detection to work I've the following: FIBARO MOTION SENSOR FGMS-001 I found some tips on this forum about using parameter 5,…
-
@Taco Hope you can help me again ;-) My node ID = 3 or isn't it? see screenshot