This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Slofware
About
- Username
- Slofware
- Joined
- Visits
- 479
- Last Active
- Roles
- Member
Comments
-
Leuk project, heb dit ook werkend via de arduino app
-
@TedTolboom yes it does. Thanks for the info. So it will be a big re-write. What is the best website to read more about how it excactly works? Like to know more of it.
-
Just for my information and understanding, not to push or to be negative. My knowledge about Zigbee is more of the general kind and don't know in dept how it works, but what needs to be done for the re-write of the new Zigbee core? Do you need to s…
-
Ik heb ook 6 zonneschermen met een somfy moter erin. Via Ali esp8266 met relais kaarten gekocht, beetje software en was klaar voor €5 per scherm. Neer gaan doe ik op de LUX meeting van een weer app maar heb zelf spullen besteld voor een klein weerst…
-
Oké found out that my thermostaat Anna was still active on the WiFi because it did not had a connection jet. It made it's own AP on the channel that's intervering on zigbee channel 11. I killed that and don't have any grouped devices and for now hav…
-
Oké thanks, but I want to use Google because i allready use it on nu phone. Maybe mqtt will work also or with a API
-
That will be another device witch can break or not communicate. I think that's oud hollands tobben....
-
lubbertkramer I meant for Athom to come and play and test to make the Zigbee working on Homey Still doing some test to improve and make it better for now because I don't to many "overhead" devices and just want to let the little friend control…
-
lubbertkramer said: Slofware said: Will that work on more than only the Xiaomi devices but also on the Ikea? i know there is an alpha out wher you can connect the ikea bridge just like the hue bridge but you need access to th…
-
Will that work on more than only the Xiaomi devices but also on the Ikea?
-
Hopefully before the sun sets earlier
-
So no more zigbee update until V2.1? Biggest problem I now have is that the device the most away from homey have a problem with the commando's, they say that there on, but there not.
-
Oké so for now it's better to switch them one by one. Can do that without delay if I switch 6 lamps?
-
What is the recommended amount of zigbee devices in a device group, now using 4 and 6 ikea lamps and sometimes 1 is not responding on the group. Also 1 single lamps is not responding on a flow, is that still a bug in zigbee? Hopefully it all will b…
-
Oke so let's wait on homey 2.0 then. Thanks for the info
-
Which functions can you use if you would include it as a general device?
-
What I mainly miss is the possibility to make more then 1 capabilities of the same kind or to mix then capabilities more. For example to have 2 switches or to have 1 switch and 1 temperature read-out.
-
Well I do got some skill's but the main issue will be time.... Hopefully someone can pick this up again!
-
kasteleman said: Other remark: please do not include the bulb near to Homey. Include it from the spot it is intended to stay. That way the route wil be the one that should be used! Shouldn't zigbee sort out it's routing all the time?
-
You still need to connect the input to the capabilitie. See the examples from the app
-
I have many ESP8266 based gadgets around my house. I will try and add the Honey code to most of them. I'll report back how that goes That will be nice to know what project's you are working at
-
Planning to hang my new house full with the ESP8266 and then control it with homey, for now the list of projects are: * Lamp on/off * itho ventilation * sun screens * floor heating pump with a ds18b20 sensor * Controlling MiLight bulbs * reading…
-
Why not use a ESP8266 chip with Homeyduino app, works like a charm and is cheap.
-
Mmmm hopefully some new internship can pick this up because it will be very great to have!
-
Got the same problem, hope they solve it soon.
-
Sorry, I had the first one posted at the wrong forum. Yes I have readed that, but how can I add the capabilitie on my Homey. I already have Node.js working, but don't know how to use it to make the change
-
Eigenlijk heb ik het niet goed omschreven zie ik net, ik wil een Capabilitie maken voor een Fan. Deze wil ik met een flow op UIT, Langzaam, medium of snel kunnen zetten
-
https://developer.athom.com/docs/apps/tutorial-Drivers.html
-
I have readed somewhere that on the wall switch (single/double) you always need to put a lamp. Is this true because I only want to use the switch's as a input for Homey
-
The Zigbee network is working as a Mesh, do you have any lights in between the Homey and the lights which are not working? I think you have the problem with GU10 spots of Ikea? Some of them use old firmware