This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Priknr1
About
- Username
- Priknr1
- Joined
- Visits
- 525
- Last Active
- Roles
- Member
Comments
-
k1s said: TedTolboom, so how do the cards work if you have more than 1 thermostat? Say for something simple like when a thermostat was updated is sends a message to the mobile: In the When... part of the flow, I drop the Heating Scheduler c…
-
Eternity said: OK. Thanks for the answer! I found a newer version of my try for a wake up light, and it was based on a newer version of the heating schedule. So I built this one back into the heating schedule again. It seems to run on my…
-
What I don't see, is how I integrate my valves and Perhaps this is work in progress? I do see how this app would make my current flows obsolete. Looking forward to any updates! Unfortunately this is not the latest version of the heating …
-
I was able to rebuild and install on my homey. https://github.com/priknr1/priknr1.heatingschedule However, this is SDK 1, and Athom does not allow "new" apps to be uploaded to the appstore if they are not SDK2. My programming skills suck, and I ha…
-
@twister800 @dbonsaksen @Gerco90 @satbopper @k1s Back in the days, I started to try to rebuild the heating schedule app into a wake-up light app. But stopped halway the process, since the alarms were added by athom and I didnt need it anymore.…
-
k1s said: Hi, @RalfVanDooren @caseda @TedTolboom and @Priknr1 do you have any ideas or knowledge about this? I don't know/have this module. But I figure you want to have a few seperate buttons/sliders instead of the 1 color circle …
-
Looking great, was waiting for the widgets. GREAT. My personal preferation for the sliders would be to use the light color for on, and the dark color for off. So keep Left for Off, and Right for On. That is fine as it is. But when the slider is to…
-
MODBREAK: Changed the titel to Outdoor, since I think that is what you mean with external. Not meant for outdoor, but a good siren on batteries: vision security siren
-
Gerco90 said: I'm very interested in this app, but indeed, I can't find it anymore in the appstore. Any news on this @CodeKing or @Priknr1? I'm tired to create a bunch of flows for my thermostat. I stopped using this app LONG ago, and I …
-
@RobinBolscher It seems more people have stability issues like I mentioned when it was still beta, any chance you could have a look, or anythin I can do to help along?
-
Sem said: Hallo, Ik ben nieuw hier dus wellicht stel ik in stomme vraag maar ik heb de spotify app geinstalleerd en heb ingelogd met een gratis spotify account, nu heb ik gelezen dat dit alleen met de betaalde versie werkt dus wil ik met een a…
-
[Modbreak] Verplaatst naar "Nederlands" sectie
-
[modbreak] naar de Nederlandse sectie verplaatst
-
I think your are deeper in to electronic knowledge than 99% of the people on here. This kind of question is more probably answered on a electronics forum like: https://www.circuitsonline.net/
-
I have something simular for going in or out the bathroom. If you set both your PIR's to , for example, 10s (meaining after detection, it stays high for 10 seconds) Now going upstairs: PIR1 becomes high. . Stays high for 10 seconds. IF PIR2…
-
You could read this blog (in Dutch) https://blog.athom.com/2017/10/20/herfst-winter-beste-slimme-thermostaat/?lang=nl Besides the smart thermostats that are available, you could have a look at Horstmann SRT321 + HRT4ZW Or SRT323 But those last 2 …
-
DaneeDeKruyff said: @Priknr1 Could you elaborate on - Armed /Disarmed /Sleep and particular the Sleep part? Do you mean that in a sense Armed with people home and Armed with no-one home? Being able to add a 'trigger' delay to se…
-
A lot of people are waiting on this. Would be great if it would be possible to have: - Armed / Disarmed / Sleep - Groups of sensors For example Bedroom is immediate alarm, but hallway is after 20 seconds, so you are able to disarm
-
caseda said: You can just put the temperature number tag into the temperature slider. Saves a few flows A great, didnt know that was possible
-
Well, in my case, I only have 1 Thermostat, and 1 boiler control unit. I use homey to set the setpoint, and the SRT321 will turn on/off the boiler unit. Since my wife works on various times, the Heating schedule was not a solution for us. I now jus…
-
This is something @TedTolboom or @caseda can probably answer. So do you want another app, than the one setting the value, to read this out? Because if it is the same app, can't you make the driver write the same value that you use for setting the…
-
No, unfortunately, that is not possible, would love that myself. But what you could do, (if you dont use the snooze function) is use the homey alarms, and push notifications to your phone, to make you phone "ring" to wake you up
-
MarcoWijk said: DaneeDeKruyff said: Hmmm, my Homey runs 1.5.5, how is it not good for my Homey? @Bram Will it explode? Will it melt? Will it blend?.. Homey runs ok on 1.5.5, @Bram Will Homey get suicidal on me? Or Chucky like? …
-
I dont know how far your programming skills go, but you could take the Action doorbell (s the action app) as an example. Or you go return the thing and get the action doorbell for 6 euro's
-
Rex said: I'm also very disappointed to hear that Homey is not accessible soon with a desktop app. For I bought my Homey I was a user of ICS2000 and was also only accessible on with android or IOS devices. One of the reasons that I c…
-
A device that is not plugged in, should end up being shown as greyed out and a broken link logo in it. This works in the desktop app, and the browser. But also you can give them names as you want. Just try to switch on/off one, if it responds in y…
-
If they would also take away the browser possibility I think they will lose massive functionality and easy accesibility. IMHO it would be a massive mistake
-
@Patricks Kijk eens naar de HRT4-ZW van Secure/Horstmann. Dat is een unit speciaal om de ketel aan/uit te schakelen. Deze kan aangestuurd worden door de SRT321 Kamer thermostaat (ook Secure/horstmann) maar door homey kan deze ook aangezet worde…
-
I dont know if Weeknummer is available as a Tag. But if it is you could use the "remainder" calculation. AND: Better logic Math.js expression is true ( Weeknummer % 2) It devides the Weeknummer by 2, untill it can no longer do that, so on even…