This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
NewTon
About
- Username
- NewTon
- Joined
- Visits
- 1,039
- Last Active
- Roles
- Member
Comments
-
magzusa said: @cautje @Ronald_A Same thing for me. It's an absolute must to set manual delays for every action switch on/off. If no delay is used then most of the bulbs don't react at all. But still there is usually 1-2 bulbs that does not rea…
-
lubbertkramer said: At all above, you all know it's an EXPERIMENTAL version/update that you all did/are running, Ifyou all want to get it to stable please make an issue at Github so Athom can take a look into the problems and make 1.5.6 stable.…
-
After the 1.5.6 rc8 update, all zigbee devices are still working. When rc6 was installed, zigbee was instable and also with rc9. But after some time, the zigbee network became more stable. Zigbee needs a learning curve? At this moment, my zigbee net…
-
Since I updated from Homey firmware 1.5.5 to 1.5.6 the zigbee mesh network is not working anymore. Not immediately, but after some hours. The network looks like this: After a PTP and waiting some time it looks like this: But, after some hours, Hom…
-
Wrote this at the time as glijie: 1) Install the app Countdown 2) Create a timer in the CountDown app 3) Create Flow: IF motion detected is on AND machine=off THEN switch on machine ELSE stop timer 4) Create Flow: IF motion detected is off THEN Sta…
-
@Patricks Ik begrijp dat je nu nog geen Nefit thermostaat hebt en alleen thermostaatkranen in de woonkamer. Aangenomen dat er al een bypass is, lijkt het mij voldoende om een z-wave thermostaatkraan in de kinderkamer te installeren en die aan te st…
-
marvand said: Die had ik inderdaad al gezien maar hiermee diskwalificeer Homey zich alleen maar verder. Ik zie alleen maar oplossingen buiten homey om. Ik snap niet dat er geen werkende oplossing is binnen Homey (of ik loop te k#tten met de …
-
I think a movement is not sent to Homey if the movement state is still on. This means that the movement state will be on without sending a movement signal to Homey when there is still movement in the area/room. Hence a countdown timer can hit 0 if t…
-
I managed to pair the bulb eventually. Just trial and error. Do not have a clue.
-
Today I bought a E27 dimmable 1000 lumen bulb. I can't get it paired with homey. I had pairing problems with other bulbs of the same type., but these paired eventually. Is this a Homey or a tradfi problem?
-
TonD83 said: No-one has any ideas? Tradfri does not work reliably at all and I would hope someone from Athom would care about that... Works fine for me. I have 4 Tradfri bulbs. Distance between Homey and all bulbs max 5 meters. Does the …
-
mwolfs said: Nee, ik probeer niet door de muur heen te komen. Ontvanger zit in het stopcontact op de muur. Ben net even gaan navragen en het zou om de volgende Termoparel HR++ gaan. Termoparels (gemaakt van EPS, geëxpandeerd polystyreen) besta…
-
I have the idea that the sensor does not wake up or that the app does not receive the wake up signal. I have tried to change a alarm delay, but the log does not show any change in timings. After a removing and replacing the battery the % was updated.
-
I have the same issue with a fibaro pir. After installing, weeks ago, it showed 100% shortly. Since than, it just shows a "-". Wakeup interval is 12 hours and not weeks .
-
Nattelip said: it is not that simple. i dont know if the hue zigbee system is open. and compatible with the hue zigbee systeem. plugwise is also zigbee but cant communicate with the hue bridge. On the plugwise website they tell that the…
-
@casperboone I found this information source: Samsung Smartview SDK . Already known to you?
-
fiek said: NewTon said: fiek said: I also installed 2.3.0 and after new login in the App, I noticed that my phone is displayed three times in the flow screen. I deleted the other phones on my athom and it seems it's working no…
-
fiek said: I also installed 2.3.0 and after new login in the App, I noticed that my phone is displayed three times in the flow screen. I deleted the other phones on my athom and it seems it's working now Curious: How did you delete the oth…
-
JeroenVollenbrock said: Sadly for us, this issue does not seem to affect every Homey, which makes it very hard for us to trace it's origin. It would really help us to fix it sooner if we knew which apps or settings can cause Homey to do this. A…
-
keverjeroen said: Today I had an idea.. Do you guys think this will work? I use the Smart Precense app and Better Logic app. I want to know if human A is home, if human B is home, if no one is home, or if huma A+B are both home. What if I mak…
-
blusser said: Don't know if somebody already mentioned it, I can't rename flows anymore.. It's not the biggest bug, but annoying anyway I can rename flows.
-
I have read all the complaints. There are some complaints, that are very consistent: media, just one IR device, dutch language. I have the feeling that the process of updating the firmware is not very reliable, because there are a lot of inconsista…
-
KeepT said: I noticed the following: In homey v0.10.0 betterlogic looses all it variables after a reboot. Did anyone already notice this? No, mine are still there after a reboot and after a power cycle.
-
HarmStellinga said: My kaku won't work in a flow. IR wil only set my samsung tv out but not on. duch speech cmd won't work. its My KAKU does work after re-installing the app, re-pairing the device, but I think the most important action…
-
Peao said: IFTTT is not working for me since I've updated Homey. Here the same. IFTTT app doesn't react anymore.
-
BasVanDenBosch said: NewTon said: After installing 0.10.0, Homey does not detect the status of my Plugwise plugs anymore. Switching is possible. Seeing Github about HUE, starting the re-pair wizard might help... https://github.c…
-
BasVanDenBosch said: @NewTon : For Plugwise I suspect the same problem as for HUE, something with http-get... As for KaKu: Did you PTP (pull the plug) for a couple of minutes? BasVanDenBosch : PTP did work for KAKU. Thanks. Why is 20 seco…
-
After installing 0.10.0, Homey does not detect the status of my Plugwise plugs anymore. Switching is possible.
-
After installing firmware 0.10.0 my KAKU devices ACD-1000 and window sensors AMST-606 do not work anymore. It is not possible to re-pair the devices. Disable-enable the app does not fix the problem and also not a reinstall of the app.
-
Or just adding cards with begin and end of the civil twilight.