The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
[APP] HomeKit app (Sprut)
HomeKit for Homey
App here => https://apps.athom.com/app/com.sprut.homekit
After Homey is paired, go to "settings" -> "HomeKit". There select the devices you want to pair with "HomeKit" and wait 
Example of work: https://www.youtube.com/watch?v=yZWt6jDCl7E (New video from Homey the work)
If you have problems update your "I" device & Apple TV. On iOS 11 everything works perfectly. If you don't see for example the "SPEAKER" look here https://itunes.apple.com/us/app/elgato-eve/id917695792?mt=8
If the problem remained fully describe the situation. If you found any bugs, any other feature you can create an issue on com.sprut.homekit
Differences from HomeyKit:
-- The new logic works, you can add any device and if it supported device types they will be added to HomeKit. If the device is not supported device types will be added to the device "NOT SUPPORTED" - If you want I added a new device type send me "full info:" the device from the log on sprut666666@gmail.com
-- Removing devices from the form of the plugin is correct.
-- You can remove the device directly to Homey, and everything will be deleted and HomeКit and the plugin will work correctly.
-- Global optimization work with HomeKit a lot of fixes
-- Improved stability fixed all possible crashes (For example, the application was not working and you removed the device)
-- Check the availability of the devices
-- Many other small additions and fixes
-- Added many new types of devices and fixed old.
Now supports the types:
- Light (On-off, dim, Temperature control, RGB)
- Fan
- Switch
- Outlet
- Doorlock
- Curtains
- Motion sensor
- Humidity sensor
- Light sensor
- Carbon dioxide sensor
- Temperature sensor
- Leak sensor
- Smoke sensor
- Contact sensor (door/window sensor)
- AirQuality sensor
- Thermostat
- Volume speaker
- Vacuum cleaner
- Button (simple and Play/Pause etc)
- Doorbell button (as Motion sensor)
- Battery service for all
Donate
Many thanks to the developer who wrote the library has-node Without which the application cannot run 
Many thanks abedinpour so much for the work done.
The basis of this application is taken development com.swttt.homekit Many thanks Swttt so much for the work done.
And I Sprut - engaged in ongoing app development
If you like the app, you can thank the authors:
Sprut PayPal:
&&&&&
Swttt PayPal:
&&&&&
abedinpour PayPal:
Changelog
1.1.7
- If wakeup interval > 15 seconds - no online state
1.1.6
- Extended support for status updates of devices
1.1.5
- Verification of successful installation of the new parameters in Homey
- Fix for MiLight
1.1.4
- Small fixes
1.1.3
- Critical bugfix when adding many devices
1.1.2
- update has-node 0.2.3
1.1.1
- fix WindowCovering
1.1.0
- update has-node 0.2.2
- new ColorTemperature
- fix RGBW
1.0.5
- fix bugs in Thermostat & expansion of functionality
1.0.4
- fix Thermostat not measure_temperature
1.0.3
- Add Doorbell button (as Motion sensor)
1.0.2
- Add full device info for debug
1.0.1
- Support 2 bridges for example com.swttt.homekit
1.0.0
- Initial release
Comments
New update 1.5.1
### Support for new exclusive services: [HomeCenter for HomeKit])
update has-node@0.4.13update athom-api@2.0.108
Support temperature is less than zero
Fix Error: Homey Offline
Add lib new-types-for-homekit@1.0.1
Add support Atmospheric Pressure
Add support Noise Level
Add support Ultraviolet
Add support Power Meter
Add support Security System
For installation, use these instructions https://developer.athom.com/docs/apps
App here https://github.com/sprut666666/com.sprut.homekit
I think this fair offer I will do good the Homey project
I have installed the Athom-cli but i can't get to athom log in.
Am i doing something wrong?
Is it possible to voice control a virtual device trough Siri?
I have some light plans called: lampen 1, lampen 2, enz. triggered by an virtual device.
How can i trigger them trough Siri?
I have virtual device for play playstation. There is no way to i can trigger it with Siri?
I wanted to add a new lamp to my HomeKit. It is the milight gu10 rgb+cct. It works almost perfectly. Dimming, color, on/off with siri all work as expected. The only thing that does not work is putting it back to white. Siri says it is putting it to white but nothing changes... Don't know if temperature should work (have warm white to) but that does nothing either.
Let me be clear a bit. It works in the Home app from apple just not with siri (white and temperature).
Are you aware of this? Is there something I can do?
Greetings,
Aaron
while you're playing say ' hey siri, beatbox for me' ...... I love that one
Or send report => http://bugreport.apple.com
DId not know it was the fault of apple
@dd3uk
Thanks, I will try this
Added the Fibaro z-wave motion sensor, works fine in the Homey but in home kit it tells me 0 degrees, and Home says it´s not supported. Do you have a clue?
Update - turns out you can switch around the alarm on/off when door open/closed in the Homey settings. This will update it correctly in your homekit app, but still out of the box you will have the situation as described below.
I've purchased and received a new Aeotec Door / Window Sensor 6, which works perfectly with Homey. The description of the alarm left me a bit puzzled though as 'NO contact alarm' means the door is actually closed. I interpreted it the other way around at first but then learned when the contact between the magnet and the sensor is broken, hence the door is open, the contact alarm will be ON.
In short:
- Contact alarm = NO means the door is closed
- Contact alarm = YES means the door is open
The way it is implemented in your homekit now is that it shows the door OPEN when in fact it is closed.
Happy to help you verify if needed.
fredrikb Describe in more detail what preceded this?
WouterNLD send full device info
I have the same problem, I Think 2 times now, suddenly homekit says uppdateing.... on every thing, and the only thing I have found working is remove homekit from Homey and ad it again, one thing I havent tried is remove every thing from homekit and ad them again, I will try this to next time
If you want to remove a person, tap
, tap the user, then tap Remove Person.
Any ideas?