This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Tado thermostat

1246714

Comments

  • Winter is (not yet) comming, but yust to make sure.

    I can see @homey insights
    'set temperature'  -> but it only registers the value once
    solar intensity -> working OK
    Outside temperature -> working OK
    Humidity -> not logging

    I do not see the current temperature of the thermostat in the logging??

    should (could) this be solved?

  • phil_sphil_s Member
    edited September 2016
    since firmwareupdate to 0.10 the device card of the tado thermostat is empty.
    i deleted it and saved under settings my password and added the device from scratch but no effect.

    see screenshot:

  • edited September 2016
    phil_s said:
    since firmwareupdate to 0.10 the device card of the tado thermostat is empty.
    i deleted it and saved under settings my password and added the device from scratch but no effect.

    see screenshot:

    read my post here:
    https://forum.athom.com/discussion/comment/32098/#Comment_32098


    and bug report:

    https://github.com/athombv/homey/issues/875


  • phil_sphil_s Member
    edited September 2016
    Thx, yeah i Must control my motion sensor ....

    after triple click (wake up the Sensor) the temperature is displayed! Lux Not, but i will wait. 

    But ny tado Thermostat has no "wake up" function like the zwave Sensor.  
  • I just saw that it is possible to POST geo-location to tado API.
    Would it be possible add this to the app as action flow card? This could be used to activate tado`s Home and Away state.
    Geo location = Home location = at Home
    Geo location = South pole = Away.
  • Hi all, below some info of what's going on with the Tado app.

    I've ordered both the Tado Cooling and the Valves product, and should hopefully arrive somewhere in October. By then I hope most of the issues with Homey (0.10) will be fixed, and more stable.

    Currently my Homey is completely fscked after the update to 0.10, a lot of settings options have disappeared, and all devices are gone. So I probably need to force a factory reset.

    So, after Homey has stabilized, I'll work on updating the Tado app further for all the new Homey API changes, and start working on supporting both the Cooling and Valves products from Tado.

    @honey: geo options are on the todo list, but currently not high priority.

    @phil_s: did you try turning if off and on again? (pun intended)

    @JurgenHuijbregts: I'm aware of these issues. But I'm waiting for the Homey API to stabilize a little bit.

    So, you can probably expect a new release of the Tado app either at the end of October or beginning of November.

  • phil_sphil_s Member
    edited September 2016
    Thx for your answer HellHound. I will wait for your App Update. I also ordered the v3 bridge as an Upgrade for existing users. And the New price of the Thermostat (129€) is Even better than the price before (~200€)!

    so i will slowly extend my tado System. And so i can wait for your App. I am glad that there is somebody (you) who can code this App! 

    Please let us know when you are working on it. 

    Greeds
  • @hellhound awesome stuff, looking forward  to seeing more especially the new valves ^^
  • Yes, great work, thnx, very much appreciated

  • HellHound said:

    I've ordered both the Tado Cooling and the Valves product, and should hopefully arrive somewhere in October. By then I hope most of the issues with Homey (0.10) will be fixed, and more stable.

    Currently my Homey is completely fscked after the update to 0.10, a lot of settings options have disappeared, and all devices are gone. So I probably need to force a factory reset.
    @HellHound ;
    Don't reset! The pending update (0.10.1) will fix it!

  • @HellHound ;
    Don't reset! The pending update (0.10.1) will fix it!
    Indeed, I expect today or tomorrow 0.10.1 will come out...
  • I have updated to 0.10.1 and completely wiped Homey but still can`t add Tado. It hangs on the New devices are being added page.
  • phil_sphil_s Member
    edited September 2016
    Try to Type in your tado Account Infos at the tado Settings Page in homey again. And Save it. 

    Then an try to add the tado device. 
  • ZperXZperX Member
    edited September 2016
    I have wiped homey again. Now I could add as a device but bumped into a new issue:

  • HellHoundHellHound Member
    edited September 2016
    @RobinVanKekem Thanks, avoided the pain of a reinstall :)

    @ZperX
     This means the app has crashed or killed for a reason.

    First, remove the app from Homey's Devices.

    Check your Tado login and password under Homey Settings > Tado.

    Try the login and password on https://my.tado.com, it should log you in.

    Now, reinstall the Tado app under Homey's Devices.

    Just tried it myself, and worked. 

    @phil_s @MarcelTimmermans After a reinstall of the app, I now receive details again on the Tado card.

    So, 0.10.1 helped.


  • Re-install gave me my details back as well.

    Unfortunately the set temperature does not get updated anymore. If I change the set temp (on tado or in the tado app) the set temp in homey doesn't get updated.


  • Tim_BrassTim_Brass Member
    edited September 2016
    I'd like to use some variables i take from tado to use a elro socket as a automatic pump switch.

    Here's what I'd like to get:

    When set-temp is higher then inside-temp then variable heating is true

    when (var.) heating is true switch on floorheating pump (elro switch)
    when (var.) heating is false switch off floorheating pump (elro switch)

    when the pump is off for 24 hrs switch it on for 2 min. (so it won't get stuck)
  • yes here are also the details of the card back after 0.10.1 and readding the device.
  • HellHound said:
    @ZperX This means the app has crashed or killed for a reason.

    First, remove the app from Homey's Devices.

    Check your Tado login and password under Homey Settings > Tado.

    Try the login and password on https://my.tado.com, it should log you in.

    Now, reinstall the Tado app under Homey's Devices.

    Just tried it myself, and worked. 

    I tried it many times. No luck. Or I have the issue that it hangs on the New devices are being added page. Or if I manage to add it crashes straight away.
    The login name and password is positively correct. I done it with copy paste as well. Works on the tado website.
    It is somethings else going on.
  • ok, i just want to push humidity (52% on the iOS tado-app) to my phone. there is alwas 37 as the humidity shown?
    it pushes alwas on humidity changed, but the value is always 37.

    also humidtiy is not shown in my insights in homey.

    temperature and target-temperatue are shown correct.
  • ZperX said:
    HellHound said:
    @ZperX This means the app has crashed or killed for a reason.

    First, remove the app from Homey's Devices.

    Check your Tado login and password under Homey Settings > Tado.

    Try the login and password on https://my.tado.com, it should log you in.

    Now, reinstall the Tado app under Homey's Devices.

    Just tried it myself, and worked. 

    I tried it many times. No luck. Or I have the issue that it hangs on the New devices are being added page. Or if I manage to add it crashes straight away.
    The login name and password is positively correct. I done it with copy paste as well. Works on the tado website.
    It is somethings else going on.
    I have the same problem.
    Also 100% sure password and username are correct.

    Is there a solution?
  • The same here. Are there other programmers here who could fork the project help to update the code?
  • Also the same here with Homey Firmware Versie: 0.10.3
  • For those with setup/initialization problems with the Tado Homey app, can you please answer the following questions,

    - what is your Homey version

    - what is your Tado Homey app version

    - what is your Tado version: available in the mobile Tado app, at the bottom of the menu. For reference, mine is 2.13.2 (1500292266)

    - do you know which generation Tado thermostat you have ? Possibilities: v1 (+-2013), v2 (2014-2015) or v3 (2016-). Mine is v1. I'll receive a v3 soon.

    - how many Tado zones/homes do you have

    - how many Tado thermostats do you have in each zone

    - do you have other Tado products in the same zones





  • phil_sphil_s Member
    edited October 2016
    i have just one thermostat (i bought it two month ago as a starter kit, so i think v2 or v3).
    the bridge is v2 and i just recieved a mail from tado that the upgrade to v3-bridge will delay a bit.

    i have no problems to include my thermostat into homey! but i must do it every firmware update from homey again because with every new update of homey the devicecard looses the values.

    humidity isn't shown in insight and is always 37% when you let homey say it. but the tado ios-app say it is 47 or 50% (changing normaly).

    my tado version (iOS): Version 3.1 (3205)
    only one zone. Planing for a second thermostat with the New bridge. 

    hope i can help you so far ;-)
  • I am afraid it is a bog standard setup:
    Homey: 0.10.3 (but had all the other versions and it never worked)
    Tado: The most common V2
    The android app version is 3.1.0 However I believe it is not relevant.
    App version: 0.5.2
    Other products: No
    Zones: 1
    Number of thermostats:1


  • Same setup here. With IOS app.
  • When I receive my new Tado thermostat I'll rework the code, based on Athom's NetAtmo app.
    Hopefully this fixes most problems.
  • Thank you HellHound! No stress ;-)
  • When can we expect Tado 0.5.3 in the appstore?
Sign In or Register to comment.