This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

[APP] Better logic / Variable management

18911131425

Comments

  • posthokposthok Member
    ok but i don't dare to go to a experimental firmware, there's no way back.

  • When I create avariable, it wont get saved.

    installed the App again and also rebooted a couple of times.

    anyone else got this?
  • UrandayUranday Member
    It's a bug in the homey
  • When I create avariable, it wont get saved.

    installed the App again and also rebooted a couple of times.

    anyone else got this?
    Is there already a workaround for this "bug 600" ? or wo I have to wait for next Homey Furmware?
  • When I create avariable, it wont get saved.

    installed the App again and also rebooted a couple of times.

    anyone else got this?
    Is there already a workaround for this "bug 600" ? or wo I have to wait for next Homey Furmware?
    Athom said there releasing a hotfix real soon to solve the issue asap
  • MarcoFMarcoF Member
    This afternoon I installed better logic and I could create a variable and access it through a flow card.


  • UrandayUranday Member
    MarcoF said:
    This afternoon I installed better logic and I could create a variable and access it through a flow card.


    Is the hotfix released? 
  • MarcoFMarcoF Member
    edited May 2016
    not that i know..

    Uninstalled it afternoon and will try an new install.

    hmmm now its working anymore and I doubt if it worked.....

    Never mind....
  • I just noticed a strange issue. I have quite some flows that are triggered when a BetterLogic bitflip device is changed. A lot of stuff in my house had not been working the last couple of days and I blamed the frequent Homey freezes but I now found out that all flows that are triggered with a bitflip device are not working. I tested it and indeed, it just does not trigger a flow anymore. I'm on 0.8.34 and 0.9.5 of the BetterLogic app.

    Anyone else that can confirm this issue?
  • RonaldRonald Member
    Any news on the fix ?

  • bvdbosbvdbos Member
    On Slack:
    17:09 weejewel probably tomorrow
    17:09 fixed the worst bug today, last minute

  • So again a Release Friday? Yay!  :D
  • 0burner00burner0 Member
    edited May 2016
    Can some one share a link with a how to?
    I understand for what you can use this. I cant figure out how to get it working.
    I tryed to create a Variable in system settings. But it doesnt save some how.

    I want to start with the basics, some thing like this.

    If  Variable Sfeer verlichting  set to on  then turn light 1 on turn light 2 on.

    How do I create a Variable Sfeer verlichting that has 2 states: (on, off, )
  • casedacaseda Member
    @0burner0 ;
    no how to is needed.
    There is a bug with either homey saving (even though @emile said it's not homey after 10 minutes debugging) or the app has an error with saving variables.
    either way, you can't make any new variables.
  • @0burner0 what firmware is your homey at?
  • bvdbosbvdbos Member
    The cause of the bug has been found. Now it has to be solved...
  • UrandayUranday Member
    There is a bug in the homey (or an undesired feature that I have to discuss with @Emile ;

    https://github.com/athombv/homey/issues/628
  • I hope they will fix it soon
  • PhuturistPhuturist Member
    edited May 2016
    For anyone who knows how to use the athom-cli. I have edited version 0.9.5 of the BetterLogic app based on some comments on Slack by Uranday and ralfvd. It contains a workaround for a Homey issue. You can install this version of the app through the CLI and it will work with Homey firmware 0.8.35 and you will be able to save your variables on the settingspage again.

    Just remember to install the original app again after Athom fixes this bug:  https://github.com/athombv/homey/issues/628.

    Disclaimer: use at your own risk!

    https://drive.google.com/open?id=0BzC8ui8syIvfTE1KcUprUmVRbkU
  • Phuturist said:
    For anyone who knows how to use the athom-cli. I have edited version 0.9.5 of the BetterLogic app based on some comments on Slack by Uranday and ralfvd. It contains a workaround for a Homey issue. You can install this version of the app through the CLI and it will work with Homey firmware 0.8.35 and you will be able to save your variables on the settingspage again.

    Just remember to install the original app again after Athom fixes this bug:  https://github.com/athombv/homey/issues/628.

    Disclaimer: use at your own risk!

    https://drive.google.com/open?id=0BzC8ui8syIvfTE1KcUprUmVRbkU ;
    If I do you're install and athom has solved the problem. Do I have to make the variables again with the "Athom" version?
  • PhuturistPhuturist Member
    edited May 2016
    mbalik79 said:
    Phuturist said:
    For anyone who knows how to use the athom-cli. I have edited version 0.9.5 of the BetterLogic app based on some comments on Slack by Uranday and ralfvd. It contains a workaround for a Homey issue. You can install this version of the app through the CLI and it will work with Homey firmware 0.8.35 and you will be able to save your variables on the settingspage again.

    Just remember to install the original app again after Athom fixes this bug:  https://github.com/athombv/homey/issues/628.

    Disclaimer: use at your own risk!

    https://drive.google.com/open?id=0BzC8ui8syIvfTE1KcUprUmVRbkU
    If I do you're install and athom has solved the problem. Do I have to make the variables again with the "Athom" version?
    No.
  • Ok..thanks for the fix. Gonna try it this evening. I miss the Better logic about 2weeks, horrible. Want to make variables again
  • Phuturist said:
    mbalik79 said:
    Phuturist said:
    For anyone who knows how to use the athom-cli. I have edited version 0.9.5 of the BetterLogic app based on some comments on Slack by Uranday and ralfvd. It contains a workaround for a Homey issue. You can install this version of the app through the CLI and it will work with Homey firmware 0.8.35 and you will be able to save your variables on the settingspage again.

    Just remember to install the original app again after Athom fixes this bug:  https://github.com/athombv/homey/issues/628.

    Disclaimer: use at your own risk!

    https://drive.google.com/open?id=0BzC8ui8syIvfTE1KcUprUmVRbkU ;
    If I do you're install and athom has solved the problem. Do I have to make the variables again with the "Athom" version?
    No.
    The google drive link doesn't work...
  • bvdbosbvdbos Member
    edited May 2016
    https://drive.google.com/open?id=0BzC8ui8syIvfTE1KcUprUmVRbkU
    deleted the chars at the end of the URL. @Phuturist : perhaps upp the version-number with 0.01 ? If @Uranday would upp the official version with 0.02 maybe settings keep saved?
  • mbalik79 said:

    The google drive link doesn't work...
    Fixed the link in the original post, it contained an extra semicolon at the end.
  • Phuturist said:
    mbalik79 said:

    The google drive link doesn't work...
    Fixed the link in the original post, it contained an extra semicolon at the end.
    Thanks! 
  • RonaldRonald Member
    Works for me.
    Thanks

  • works for me too.. You make my homey-weekend!
Sign In or Register to comment.