This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Closed Official Zigbee SDK2
[App] Xiaomi-mi ZigBee - Main discussion topic (v0.4.1)
This discussion has been closed.
Comments
edit: sorry ma fault. one must activate the flow, LOL
sorry guys, it works
i not just toggle on/off in the first flow because i have another flow that set the brightness off the bulb to just 50% whenn i press the button 2 times.
and the first flow just clicking once set the brightness to 100% if the light was turned off.
bytheway: i am impressed of the really cheap switch. i justed ordered two other on gearbest ;-)
some zwave switche can look at this switch how it shoulg go (zwave.me didn't worked for me)
Tried something like above but just nothing seems to be working when I press the button. What am I missing?
perhaps you are out of range to homey. Try to make a simple Flow which just homey let say „yes“ or something else. Take the voice card to do it. Then press the button near homey. If homey says „yes“ you know that the button works. If not just repair it to homey.
If it works try a bigger range to homey. So you can See when it breaks. Then you have the range of your button. If you want a bigge range you have to install another zigbee device on half the way to extend the range to your button. This „Mesh“ of zigbee can only extend with wired devices like bulbs or plugs. No battery devices can extend the range.
Maybe @TedTolboom has a suggestion?
Edit: I deleted the deviced and added it again. This seem to have worked. Thanks!
Since debug-logging for Zigbee is still limited, the best option to debug an issue with a switch is to create the following flow; logging the scene trigger to e.g. Simple Log
Pressing the right button 1 time will give the following logging:
which is used to trigger alarms for smoke and gas detection events...
I will check with Athom if they can provide an insight when this will be added...
In the supported devices description it says:
- Aqara Human Body Sensor (motion alarm, luminance, temperature)
But I get no temperature reading form the sensor, so I wonder if it really is a capability of the device.In the device card I see a battery icon and Battery Alarm indicator, but I get no battery percentage.
I also see a trigger card in the flow editor 'The battery level changed' but it never triggers. Same goes for the 'The battery alarm turned on' but that is expected since it's a brand new sensor.
So the question is: Should the battery percentage be reported and available in the device card and flow cards?
Will be updated to "Aqara Human Body Sensor (motion alarm, luminance)" in the next app update. Battery reports are not working yet.
To avoid having to re-pair the devices, we decided to add the battery capabilities, so that with a driver update it would be possible to get the battery reports working
Except for the motion sensors. They doesn't seem to restart the timeout after the initial movement.
I takes like a minute before it starts to register movement again.
So if I set the timeout to 30 seconds and move around infront of the sensor it will just recognise me once and then turn off after 30 seconds.
Am I doing something wrong?
So I can try to reproduce. It could be that for this sensor the lower threshold should be at least 60 seconds (and not 30 seconds)...
I would like to have it know if I'm still in the room without having it waiting 2 minutes before realizing that I left the room. That's why I would like to have a low threshold. I control my bathroom lights with it.
Is this because I am not on the experimental channel for updates with my Homey? Or is it because I have "Xiaomi Mi Home" installed (which is indeed version 2.3.1 .)? Is this app not compatible with the Mi Home app?
the feedback that you have 2.3.1 installed is a bug in the App Store
Yeah but does it reset when you move in between those 60 seconds? So it doesnt Timeout If there still is movement
but all devices work without problems...
nevermind, must have misread something
The do however seem te react normally when checking them in the 'Devices' page.