This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Official
Comments
Is there anyone in this thread who could reproduce the error AND is a developer so he/she can see the error code?
maybe this is a know issue ?
nothing seems to trigger the flow when i use "recording starts" value.
does anyone know how to fix this ?
Installed the app, filled in the right data (ip/port/user/password) but nothing happens when hitting the 'Gegevens opslaan' button. Restarted the Homey, didn't help. Can I provide you with any information so you might be able to provide some help?
Last time someone told me that using the local IP didn't work, they used their DDNS address instead and then it worked.
It worked fine for about a year or so, then fall 2017 it stopped working. And never got back to work again. Really hope by now the underlying issue already has been fixed @jorden ?
*EDIT*. Now I remember what the issue was: I could not re-add my Foscam cams to Homey, via the following dialog.
After hitting 'save info', I get a second screen with a spinner but then simply nothing happens, no list of Synology-connected cams popup or something like that.
I really would like to get a picture on my phone from my camera if a movement sensor is triggered. Problem is; I am not really a geek. Is there an easy, understandeble way of installing this? Or am I still to early..
Grab a screen (App) and have it send (App) after motion/alarm is detected.
In Telegram (with Screen Grabber):
With the Syno App:
Im trying to create some flows but im not getting the result i want.
Goal: When cameraX starts recoding, take snapshot as token and send in pushbullet notification.
What i have managed: When TestLight is turned on, take snapshot as token and send in pushbullet notification.
Then when i turn the TestLight on, a snapshot is taken and sent with pushbullet. So thats fine.
But if i change "When TestLight is turned on" to "when cameraX starts recording" and move in front of the camera (it records in survaillance station), then nothing happens, no pushbullet is sent.. What am i doing wrong?
"Pulling" is enabled in the settings..
Regards Johan
Did all of the below
- Make sure to add a user that doesn't require 2 factor authentication.
- Add the user to the 'administrators' group, because of the required permissions.
- Under 'applications', allow the user to access the Surveillance Station
Port is 5001 and after pressing on the button: Save Data (Gegevens opslaan) nothing happens at all, no spinning wheel, nothing.I do have https enabled and disabled http access (port 2001) .
I realize after analysing my needs, that the flow actions I need are already in place in Surveillance Station itself and that works good enough for me. (only get e-mails with pictures from camera's where motion is detected).
Thanks for reply!. Consider https as feature request.
I have Synology Surveillance Station v1.2.9 on Homey but the flow below is not working. The flow is setup as follows:
When Foscam camera starts recording, say "Camera" and send the push message “Opname gemaakt”.
This flow is working in the “test mode” and both the message and sound on Homey is working perfectly. Unfortunately although the recording is starting of the Foscam camera using Synology it’s not triggering anything. I can confirm that the Synology is recording and even I have enabled for now to send a push message via the Synology App (so not Homey App) to show the message like this “Synology Surveillance heeft bewegingen geconstateerd”.
Did all of the below:
What is what I am doing wrong and what can I check more on this?
@Eternity, does this still work for you? I can't get it to work.. Homey shows it sends te command but nothing happens.
Tested via a flow to set the Home Mode of/off still works here.
- Doorbird has not yet the possibility to select small portions of the image for motion (only large tiles).
- I use SurveillanceStation on my Synology NAS to send me E-mails when something moved on a Camera, with the possibility to select very small tiles for detection area done by SurveillanceStation (very nice).
- Synology app for Homey does not send motion detection trigger to Homey with me, what ever I try.
This is the solution:
- Installed the app HTTP Request flow cards on the Homey
-In SurveillanceStation I now use an extra external action to the Homey:
In Homey the get card and the Logic value :
IF HTTP-GET Event:DoorBird-Motion AND value=Doorbird_MotionDetect DO .... what ever you want.
I now get the motion detection trigger from SurveillanceStation, with the latest live picture from my Doorbird.
WIth this trigger I now also can switch on the outside lights with a random delay between 55 and 180 seconds to switch off.
Ik krijg het bijna voor elkaar. Het probleem is dat bij mij de HTTP poort 5001 is als ik "opdracht ophalen" doe en niet 5000 waardoor de http flow hem niet pakt. Krijg een rood uitroepteken. Heb jij een idee hoe ik dit kan oplossen? Thnx!
Just to make sure, here is the url I use to switch ON the SS Home Mode (just change your IP:PORT and credentials):
http://IP:PORT/webapi/entry.cgi?api=SYNO.SurveillanceStation.ExternalEvent&method="Trigger"&version=1&eventId=1&eventName="This is external event1"&account="xxxxx"&password="xxxxxxx"
PS
Check your { I think you added these, but they shouldn't be.
Thnx vor het meedenken en de hulp!
Ik heb nu exact gedaan wat je zei en hij triggert maar niet.. Ik heb je vorige post zin voor zin gedaan en ingevuld. Zijn er nog bepaalde instellingen in de SS? Ik krijg wel het groene vinkje bij GET. Lijkt net of de SS het niet ziet.
Feel free to PM me and we'll continue on Dutch and off-forum.
If solved you can post the solution here again.