This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
tlangelaar
About
- Username
- tlangelaar
- Joined
- Visits
- 1,254
- Last Active
- Roles
- Member
Comments
-
All material still available.
-
Motion sensor not yet sold.
-
@androidfroyo, was talking about https://xiaomi-mi.com/sockets-and-sensors/aqara-temperature-and-humidity-sensor/, not the water sensor. See my flow, I trigger on air humidity not water detection.
-
Xiaomi, less than €10,- on Ali Express
-
I've added a cheap second Zigbee humidity sensor at another floor. Start high ventilation when difference is higher than 9% and reduce when difference is lower than 7% (first humidity tag is taken from first card, second from tag list and sensor on …
-
Try reading more on https://apps.athom.com/app/nl.regoor.flowbackup. You can back-up, possibly edit a copy that disables your flows and restore.
-
En er is de keuze gemaakt dat een app ontwikkelaar voor zijn app maar 1 topic hoeft bij te houden. Zo blijft het voor de vrijwillige ontwikkelaars te behappen. En die is vrij logisch in het Engels. Handmatig vertalen is veel te veel werk. Maar moc…
-
Please note that channel numbers for Zigbee and WiFi differ: https://support.metageek.com/hc/en-us/articles/203845040-ZigBee-and-WiFi-Coexistence
-
You can also disable the flow (flow card in then column). Enable flow again using another trigger.
-
Kun je aangeven welke app je precies op Homey gebruikt? Er zijn twee type Hue apps, een zonder en een met bridge. Bij die laatste kun je met een flowcard een scene starten. Met de eerste zul je per gewenste instelling een nieuwe flow kunnen maken en…
-
Difference is in the set of sensors that could trigger an alarm. See Heimdall settings for your specific configuration. Use partially (gedeeltelijk) mode for e.g. night time when you don't want bedroom sensors to be alarm triggers.
-
I'm not familiair with IF cards for specific values. Choose another card from the sensor/device deck that says temperature changes or .. Changes. The AND column cards never trigger a flow, just check current values. If you have built a non-working f…
-
create a Flow with IF flow is started, AND all specific conditions for closing, THEN close. Then create one flow for each sensor: IF sensor value changed THEN trigger first flow. Both flow started and triiger flow are found under the Flow card dec…
-
Why not connect the controller / button to Homey and with a flow select the Hue scene and perform the other actions?
-
Klopt, heb ik ook gedaan Heb mijn twee zonneschermen apart en ook als combi toegevoegd. Hierdoor kan ik vanuit Homey zowel de schermen los als ook tegelijkertijd bedienen vanuit de devices.
-
Kunt inderdaad sensoren /schakelaars eenvoudig koppelen aan actuatoren (bijvoorbeeld lampen / motoren) van andere merken. Ik heb zelf minder dan 1 seconde vertraging via de Hue bridge, werkt prima, ook voor mijn vrouw. Recent is er tevens een Hue a…
-
That's possible if you have the correct type (check type on the app page). Do you already own a Homey? Then just try it! Remote will still work as well.
-
Network might also be good enough for direct connections, no mesh needed? Possibly the device itself is failing? Test switching locations or appliances inserted.
-
Scènes zijn onderdeel van Hue bridge. Zonder bridge voor nu dus geen scènes Mogelijk dat de Hue app (zonder bridge variant) later nog uitgebreid wordt met soortgelijke functionaliteit.
-
@OetAelse, there is a solution for this. Please search the forum for "1 hour behind".
-
I've just read the following wiki: http://thingsthataresmart.wiki/index.php?title=How_to_Reset_Philips_Hue_Bulbs. I don't have a remote and found a way to reset individual bulbs. Haven't had the time to actually perform the procedure.
-
Klopt, dan loopt de update. Nog eventjes geduld (bij mij minder dan kwartier).
-
Creatie desired default behavior flow: If flow started (flow card) and time (from tags dropdown between 8pm and 8am then set kaku to position 1 else set kaku to position 2. Then the time depending flows: If 8pm (date/time card) then trigger flo…
-
You'll have to wait a bit longer. Update is rolled out in waves (see sticky topic on 1.5.7)
-
Inspired by this thread, I've tested power supply using the GP Batteries GL301 Powerbank. For the last 4 hours, Homey is running successfully while pulling the main from the powerbank a couple of times! This powerbank seems to be able to charge and …
-
Had the same on my first install of the FGS-223. Remove device and re-added it with Homey close by (power bank). Now workshop as expected.
-
Work around is to add a power plug (e.g. Fibaro) and measure power usage to check if device is on/off. And for the hex codes found online you might use a mobile device app (if it has IR), no experience myself though.