This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
kasteleman
About
- Username
- kasteleman
- Joined
- Visits
- 4,201
- Last Active
- Roles
- Member
Comments
-
I don't get it can you (again) mention the devices you are missing?
-
I for example use the wemos d1 with mysensors.org and the mysensors app. Works very fine.
-
@basd install both of them together?
-
I'm using the 0-10v of Qubino for several months with the official app. Works great! Using it with a tempsensor attached with a stork comfofan. You even don't need a power supply for the Qubino, it's powered from within the 12v inside the comfofan .…
-
The latter
-
https://apps.athom.com/app/de.codeking.heatingschedule Works fine for me
-
Jip, otherwise it would make no sense to set a temperaturen but they would have used a percentage or something else so yes tempsensor inside and based on that the Valve is set
-
You can not include a z-wave device into 2 seperate z-wave networks! Toon has is own z-wave network
-
Any progress on the vocore2? Have one with no use case at this moment
-
@bvb Don't own the device, so can not reproduce, but i did have a look in the app that is published by Athom. It is by design. No slider or switch as you call it. The icon itself is the switch. If turned off, it is grey. If turned on it is black.
-
We are already testing Some functionality and the app @caseda mentioned is a template so you can customize a app: select other icons, and for example extra functionality etc
-
So you did push the 4 buttons and waited until the led turns green and then pushed button 1 (i assume you had the device next to Homey)?
-
The WALLC-S devices are a pain in the a.. when it comes to inclusion. Took me 5 atemps yesterday to include. Try a reboot of Homey before you atemp to include it. Mine did after that.
-
did have a look at the app.json: line 367 and line 740: "en": "(3) Switch On/Off only (send Basic Set)" should be "en": "(2) Switch On/Off only (send Basic Set)" And I think you have to change the "class": "light", because light only su…
-
take a look at the selected option. (3) switch on/off only. And (3) switch all
-
And no batterij report?
-
one thing I noticed.Typo?
-
https://github.com/athombv/nl.eneco.toon/issues/18
-
I'm afraid it does. Had the issue after a reboot
-
had to stop the app. Wait a few minutes and the start it again. Now it is connected again
-
Look for comments from @clandmeter. He has build an app for it available on his github
-
The setting is for fixing issue if you want to dim a device from within a flow. The device doesn't dim , but is set to on. That was in my case.
-
You have to set it in app.json: "capabilitiesOptions": { "onoff": { "setOnDim": false } }, you can have a look at the qubino app. The zmnhda2 device uses it
-
Pascal, 1 dingetje nog: heb je tussentijds de settings nig eens gesaved nadat je de qubino had toegevoegd?
-
Hallo Pascal, ik vind het nl gek want ik heb ook de ZMNHDA2 icm eenzelfde schakelaar en werkt bij mij vlekkeloos. Heb wel een keer gehad dat ik op de schakelaar 2 draden had verwisseld waardoor ik een gelijk gedrag kreeg.
-
Dat lijkt allemaal goed te staan. Heb je de busch jeager goed aangesloten? Bij qubino heb je de blauwe draad nodig.
-
heb je het juiste type ook gekozen in de settingspagina? Post anders ff een screenshot van je settingspagina
-
Welk type schakelaar heb je aangesloten?
-
I think there is something missing in the zwave core that is causing this. There also Some problems with Some Qubino shutters devices that look simular. Best is to make an issue on github concerning that.
-
Check mysensors.org