This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
kasteleman
About
- Username
- kasteleman
- Joined
- Visits
- 4,201
- Last Active
- Roles
- Member
Comments
-
Kijk eens naar de Tom van Qupit (Plugwise). Deze is op basis van Zigbee. Momenteel ben ik bezig met een app te maken voor deze kranen. Dus support volgt
-
It is reported that for devices it works and for others not. Therefore it has been removed. Athom has contacted Qubino about it and it is in the to do list.
-
I already replied to the comment in the app store. It is added in the version on my github. But be aware, you have to remove and add the gu10’s within Homey in order to get the lighttemperature to work because it is a added capability for the tunabl…
-
Ah, that is one of the reasons I first connect a power cable to a module and then include it. Does not matter regarding the brand. Using this method for years. Some people even have connected Homey to a power bank so they can move Homey towards the …
-
Ah sorry for that, then i missed that. There is progres! Now we are awaiting a new firmware to be released
-
If you read this topic, it is clear that Xiaomi isn’t supported yet. We are awaiting a fix for it. After that the app for Xiaomi devices can be finished, tested and published.
-
Ok, so initially they work, until you move them to the desired place? Can you try a reboot of Homey?
-
How far are they from Homey? Had that in the past. Moved the devices closer to Homey or visa versa...or extended the mesh with other zwave devices that are closer to Homey.
-
Did you install the Qubino App? Looks like it is added as a generic device and thus no app is installed for it, or the device isn’t in the app (yet). You can check that in the app store and the Qubino app listed there.
-
I also have the smoke detector. As soon as the fix is available, i try to write a driver for it.
-
Interesting: ssIasZone maybe the alarm is in that cluster. If so, not supported yet.
-
First of all, it would be handy if you have a link to the productsite. Second, in order to fully support it, a driver (app) has to be created. Did you succeed to include it to Homey? If so, share the device info
-
Ok, then it is in the Qubino device driver for that device. Can you make a github issue for it, so Athom knows and wil have a look at it
-
Is that for both the Qubino and the fibaro devices? Could you add the info abou the specific models? There was a bug in the past and it can be the case that it isn’t corrected for all the devices.
-
Did you select the same for for the different bulbs when adding them? Do you have Some pictures of the different bulbs you are using?
-
Top, want to compare it with the one i received.
-
Mecallie said: Hi folks, I just bought [url=www.aliexpress.com/item/Xiaomi-Mijia-Honeywell-Fire-Alarm-Detector-Aqara-Zigbee-Remote-Control-Audible-And-Visual-Alarm-Notication-Work/32802657659.html]this smoke detector[/url] with the hope it wil…
-
Thx for reporting. I had a look at my code and think i know what the problem is. As a workaround, remove the bulb from the network. Reset it if needed. Then pair it again with Homey, but this time select the INNR app instead of zigbee. Then select t…
-
No, if you have them paired with zigbee, the bridge doesn't do anything. You can not connect the bulbs with both (read bridge and Homey) at the same time! Once connected to Homey, the bridge can't access them because they aren't paired with the brid…
-
Mod break: merged old Qubino app topic into new to keep history Are there people around here in need of a qubino z-wave app in order to support these devices? I'm working on a qubino app, but have only 2 devices that i can test. Request are welkom!
-
There wil be a app for those bulbs. It is wip, but don't know when it wil be available. You can not use a other brands app for it, because every vendor has a vendorspecific product id etc that has to be specified in the app.
-
so the way as Ikea does is has been tested to? First pair te bulb and the dimmer. Then pair the dimmer with Homey?
-
rschobben said: yes, I'm using one behind some wall switches to trigger scenes (have 6 separate buttons/switches wired) Have written some custom code for the zuno and homey driver works well and stable. Please share the code. I'm lookin…
-
Jip, you can use them but you need the jst connector to attach it to the zwave module
-
What model are the tempsensors? But you need a connector to attach them. I found them on Ali. ZH 1.5 mm 3 pins JST connector plug with wier cables. But be aware not to connect the colors 1 on 1, they don't match!
-
That's the zmnhda2 isn't it? That is also supported by the Athom app. Only the I2/I3 isn't (yet)
-
Why did you install my version then? It isn't under development anymore! I did the first versions of the app and from there-on Athom. Because they have more devices and therefore can better support the app.
-
"zwave": { "manufacturerId": 345, "productTypeId": 2, "productId": 1, Is in the app.json off the Qubino app. So it should be supported. Did you install the Qubino app before you included the device?
-
Jip, i'l have a look later this day to check the app
-
Did you manage to pair it with Homey? If so, as @caseda already mentioned, we need the device id.