This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
jtebbens
About
- Username
- jtebbens
- Joined
- Visits
- 771
- Last Active
- Roles
- Member
Comments
-
I too experience issues with Zigbee. Mesh not building, Ikea, Xiaomi/Aqara devices. Even Ikea bulbs (zigbee routers) are not allowing to mesh up with each other (top floor bulb lost connection all the time, when there are 2 bulbs on 1st floor and gr…
-
Well I tried everything but the Ikea bulb on my top floor doesnt work. I added close range, it works. But when I move it to the top floor it should be able to mesh with my first floor (toilet) also a router based bulb Ikea. Wifi channels are all 11 …
-
Roy84 said: Hello, i am new to homey, i have homewizard and want to use the heat- and energy link with homey, but when i want to link it, i get this message: Error: no response I tried to uninstall and reinstall, but i don't get it working, …
-
Scene bug found and fixed. We will release a hotfix tomorrow. Still working on rainmeter which will end up in beta later.
-
Yes me too. App runs on homey but looses connection via homekit interface. No updates to my Ipad homekit app
-
Slimme meter is not part of this bèta release yet. But will be in the future one.
-
spoelly said: @jtebbens did you had any change look at the 1.2.0 rc10 issue? No not yet. I dont have the 1.2.0 rc10 firmware running so hard to test/understand. I asked @jeroenbos22 to see if can resolve it.
-
wimpy said: Great Jeroen, thanks. I will try to find out how to get the test version in the homey, still new at it. https://developers.athom.com/library/getting-started/
-
Hi @wimpy I got a new test version you can try. This one should support the Netto Verbruik you want. https://github.com/jtebbens/com.homewizard I still have the "Smart meter" reading on my pending list so that feature is not implemented yet.
-
wimpy said: Guys, why doesn't the app support energylink below 0. So if you have solarpanels the energy is negative. This is ok in the original HW app but this app doesn't seem to go below the 0 line. Because it isnt build in yet. But I…
-
As one of the developers for Homewizard app we got an error report related to the experimental firmware: Uncaught TypeError: Cannot read property 'length' of null at autocomplete.js:1 at XMLHttpRequest.i.onload (api.js:1) Homey Firmware Ve…
-
quakerix said: quakerix said: Hey guys, what's wrong with this flow? I would like to have the preset in a veriable. What's the difference between the preset label and the Text label? Ah i think the preset # is a number, 0 = …
-
mbalik79 said: @jeroenbos22 , @jtebbens Could it be possible to read the "meterstanden" in a separate card (data from the p1 of the meter). In the official homewizard app I can see them, so the energielink has the data. With this link I can …
-
Upon github install it crashes: Stack trace: Error: Cannot find module './lib/cookies' at Function.Module._resolveFilename (module.js:325:15) at Function.Module._load (module.js:276:25) at Module.require (module.js:353:17) at require (internal/mod…
-
@Wros yes that adaptive stuff would be nice. Heatlink doesn't do that but my Honeywell Modulation Touch does.
-
@erwinrensink @CodeKing yes its the internal Homewizard/Heatlink page. I set a schedule via Homey and then verified it kicked in with the data applied.
-
@CodeKing ok tested and confirmed it works!
-
CodeKing said: @jtebbens Your're right! I just pushed a new update into github where this and other things are fixed. You may test this update version. On wednesday evening I'll push the new version to the appstore, it should run more stable t…
-
CodeKing said: jtebbens said: Ok I enabled the program for thermostat and it did trigger heatlink eventually. Set 14:33 as 20c Last Update: 60s ago mo - 14:33 Set target temperature of device Heatlink (225159e3-4ac2-4b9a-afaf-b8e9e328…
-
Ok I enabled the program for thermostat and it did trigger heatlink eventually. Set 14:33 as 20c Last Update: 60s ago mo - 14:33 Set target temperature of device Heatlink (225159e3-4ac2-4b9a-afaf-b8e9e328d37b) to 20° Requesting /manager/devices/de…
-
Hey I've been testing with Heatlink (yes it is using the target_temperature feature). But it doesnt see any change to that capability). I've enabled my heatlink and used the Homey/Heatlink device to modify the temperature to 14,5c but your app doesn…
-
Does not work with heatlink
-
Nice idea!
-
Ah @spoelly , your "slimme meter" doesnt have gas information or energylink does not get this data. Hence the code fails. I made some adjustments so it still should get the other details and skip the gas data.
-
Ok will help you via Slack to figure out what is going wrong
-
@spoelly strange. Ok stop app. Remove Energylink. Then restart app. Add Energylink again.
-
@spoelly ok so somewhere during run time homey lost contact with Energylink. Can you restart the Homewizard app?
-
@spoelly the latest version handles different ports on energylink (so water on s0 or s1 doesnt matter anymore). This is has nothing to do with Heatlink. Which version do you currently run? And what error message do you get? If you do have the lates…