Homewizard

gnaaktgeboren · January 2017

jtebbens said:

@gnaaktgeboren currently not possible but we will add it to the wish list. Should not be hard to do this. My guess an option in de the trigger flow card.

If I may give another suggestion.... Add the possibility to turn the heatlink on and of, same as in the homewizard app.

jtebbens · January 2017

New update soon in app store

V0.1.1:

Added temp sensors
Added trigger on prest change

Leeuw1960 · January 2017

jtebbens said:

New update soon in app store

V0.1.1:
Added temp sensors
Added trigger on prest change

Would that be the HomeWizard / Smartwares 868Mhz thermo-hygrometer ??

jtebbens · January 2017

Leeuw1960 said:

jtebbens said:

New update soon in app store

V0.1.1:
Added temp sensors
Added trigger on prest change

Would that be the HomeWizard / Smartwares 868Mhz thermo-hygrometer ??

Yes

mbalik79 · January 2017

Leeuw1960 said:

jtebbens said:

New update soon in app store

V0.1.1:
Added temp sensors
Added trigger on prest change

Would that be the HomeWizard / Smartwares 868Mhz thermo-hygrometer ??

@Leeuw1960
All the sensors added to the homewizard are working here (433 and 868mhz)

Leeuw1960 · January 2017

jtebbens said:

Leeuw1960 said:

jtebbens said:

New update soon in app store

V0.1.1:
Added temp sensors
Added trigger on prest change

Would that be the HomeWizard / Smartwares 868Mhz thermo-hygrometer ??

Yes

thanks for that

Leeuw1960 · January 2017

mbalik79 said:

Leeuw1960 said:

jtebbens said:

New update soon in app store

V0.1.1:
Added temp sensors
Added trigger on prest change

Would that be the HomeWizard / Smartwares 868Mhz thermo-hygrometer ??

@Leeuw1960
All the sensors added to the homewizard are working here (433 and 868mhz)

i asume in version V0.1.1 @mbalik79

jtebbens · January 2017

@Leeuw1960 yes v.0.1.1 will contain those. The update is pushed to the app store and is waiting for validation.

Leeuw1960 · January 2017

i als would love to see the Smartwares 868Mhz Watermelder SH8-WD-TR

jeroenbos22 · January 2017

Just published the Most recent update at https://github.com/jeroenbos22/com.homewizard

if we hit No problems it's published to the AppStore tomorrow

jeroenbos22 · January 2017

App had just been updated in the AppStore!

adju · January 2017

Installed the app, but when adding a HW device, I can't select a homewizard.
Tried a soft reboot of homey but no success.

Homey Firmware Version: 1.1.2
app version: 0.1.1

marcelwolf · January 2017

adju said:

Installed the app, but when adding a HW device, I can't select a homewizard.
Tried a soft reboot of homey but no success.

Homey Firmware Version: 1.1.2
app version: 0.1.1

It looks like you didn't add the Homewizard first. Did you already fill in your IP-address, port and password?

adju · January 2017

Thanks, I thought I did.
Checked it again and had a no response message.
Filled in the IP and password again and it's oké now.

goldstrike · February 2017

is it posible to add heatlink and energy link and the wether divices witout he homewizard.
my homewizard is broken and have all the stuff i wanna add toe the homey.

jeroenbos22 · February 2017

@goldstrike No, not at the moment. Or you need to make your own app

goldstrike · February 2017

jeroenbos22 said:

@goldstrike No, not at the moment. Or you need to make your own app

i wish i could

spoelly · February 2017

@jeroenbos22 and @jtebbens is it posible to make the heatlink part more open for users to configure stuff? For me the headlink crashes in homey.. i think because my "Slimme meter" is configured on a different port on the heatlink then the app expects. Would be nice if a user can configure this.. port 1 is water and port 2 is slimme meter.

jtebbens · February 2017

@spoelly the latest version handles different ports on energylink (so water on s0 or s1 doesnt matter anymore). This is has nothing to do with Heatlink. Which version do you currently run? And what error message do you get?

If you do have the latest version I advise you to remove the energylink and add it again. Maybe the matching to s0/s1 wasnt properly propogated.

spoelly · February 2017

@jtebbens sorry i ment energylink... i am running version 0.1.2.
This is the error.. i get after clicking the top left icon.

Homewizard is showing everything ok..

Image: https://forum.athom.com/uploads/editor/8e/x26ld9q7aulf.png

jtebbens · February 2017

@spoelly ok so somewhere during run time homey lost contact with Energylink. Can you restart the Homewizard app?

spoelly · February 2017

did that already.. after restarting its ok... for a few seconds and then back no energylink found

jtebbens · February 2017

@spoelly strange. Ok stop app. Remove Energylink. Then restart app. Add Energylink again.

spoelly · February 2017

same result

jtebbens · February 2017

Ok will help you via Slack to figure out what is going wrong

jtebbens · February 2017

Ah @spoelly , your "slimme meter" doesnt have gas information or energylink does not get this data. Hence the code fails. I made some adjustments so it still should get the other details and skip the gas data.

jeroenbos22 · February 2017

The flamingo FA21RF smokedetector thats used by many homewizard users has been added to the flamingo app Thanks to @baskiers

mbalik79 · February 2017

@jeroenbos22 , @jtebbens

Could it be possible to read the "meterstanden" in a separate card (data from the p1 of the meter). In the official homewizard app I can see them, so the energielink has the data.

With this link I can read the data:

http://<homewizard-ip>/<password>/el/get/0/readings

(I have made an request in github)

jtebbens · February 2017

mbalik79 said:

@jeroenbos22 , @jtebbens

Could it be possible to read the "meterstanden" in a separate card (data from the p1 of the meter). In the official homewizard app I can see them, so the energielink has the data.

With this link I can read the data:
http://<homewizard-ip>/<password>/el/get/0/readings
(I have made an request in github)

Yeah I can make that.

mbalik79 · February 2017

jtebbens said:

mbalik79 said:

@jeroenbos22 , @jtebbens

Could it be possible to read the "meterstanden" in a separate card (data from the p1 of the meter). In the official homewizard app I can see them, so the energielink has the data.

With this link I can read the data:
http://<homewizard-ip>/<password>/el/get/0/readings
(I have made an request in github)

Yeah I can make that.

Would be great!

Homewizard

Comments