This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

jorden

About

Username
jorden
Joined
Visits
1,268
Last Active
Roles
Member

Comments

  • Look at the back of your remote; if it says RTS, it should be supported. The IO version is not supported. I have used Homey to control my outside Somfy screens for about 2 years now, hasn't failed on me once.
  • How do you guys like the 4k Dreamscreen? I chose the Ambivision Pro which does the same, but with a camera pointed towards the screen. However, the app and the camera unit itself are quite bad (app is totally non-responsive and unclear, the unit its…
  • Undutchable62 said: Wat vindt jij van de stem Wat vindt jij van ontbreken van deugdelijke ondersteuning voor OSRAM Wat vindt jij van de reactiesnelheid Ik vind de stem prima, de mannelijke Nederlandse en de vrouwelijke Engelse zijn dui…
  • Huipri said: jorden said: This one works for me every time: Ok, I have now modified my flows, and it works with this triggercard. Why are the other cards still present if they do not work? Also, this is the very first time o…
  • This one works for me every time:
  • Huipri said: phil_s said: the state of the doorlock isn't reportet. would be fine if i can push messages to my phone if it is unlocked etc.. made an issue: https://github.com/jordenc/io.nuki.smartlock/issues/11 I have this is…
  • Je zult vanzelf merken dat het hele spraakgedeelte eigenlijk minder handig is. Dat is althans wat de meeste mensen vinden. Het wordt pas echt leuk als je met bewegingssensoren en deursensoren gaat werken. Of bijvoorbeeld je TV aan Homey kunt koppele…
  • Spazz said: jorden said: @mitch No update yet. I don't have an LG TV so can't be of much help. The "ECONNREFUSED" error, however, is very clear.  It means that the IP you are trying to have the app connect to, is refusing the connecti…
  • Fire69 said: OK, read back a little in the topic, missed some posts, apparently the Image Grabber app now uses image tokens, so I guess that's what making my Telegram-app crash... https://forum.athom.com/discussion/comment/66224/#Comment_66224…
  • Can you try to run the app from commandline (developer mode)? There should be a guide/howto somewhere on this forum
  • Gerco90 said: jorden said: Nattelip said: why dont they have an ip api like the ziggo ones in this times of domotica , i have them from xs4all was used to ziggo , if i see the brown remotes at some houses of kpn likes it look…
  • MartinGunnang said: I really think Homey looks like a gret product and it does fulfill my needs, however I would like to be sure that I invest in something "future proof" and what I have seen is that the development seems to be pretty slow with…
  • Julian said: @jorden Any update regarding the slide app? I tried a couple of times now but still no success. I'll PM you
  • Jon said: Hi guys and especially @jorden. Was the issue already fixed with the Synology not sending IP-cam pictures anymore? The Synology app still has the "old" image method, not the new Homey image tokens. I have to redo the complete …
  • Veldkornet said: I fixed my Telegram issue with the groups.  Or rather, I have a work around.  Problem is is that your bot only listens for the /register command, and not the /register@athomhomey_bot (or custom bot name).  So if there are mul…
  • Willem said: Je zou ook even de POST.NL app op je smartphone kunnen installeren. Daar zit tegenwoordig ( na aanmelding ! ) de optie in dat je een notificatie op je telefoon krijgt als er post voor je is. Er zit zelfs een foto van de voorkant va…
  • Jesper said: PaulKessels said: * "There's a weird, subtle ticking noise, also when you don't use it"  It would be good to know how 'subtle' this is and if they are going to do something about it. From their comments it doesn't feel l…
  • I like the new design; much better than the beta version. It looks a bit like a white Sonos @Julian: I have discussed with Kaj why your Slide may or may not be detected. At the end of this week you'll probably receive an "Over the air" (OTA) softw…
  • CarlaWiedenhoff said: Toch jammer dat er reclame wordt gemaakt voor zaken, die je helemaal volgens de voorschriften maakt en die dan in de praktijk helemaal niet werken. Sommige onderdelen staan nog in de steigers. Iets meer geduld met …
    in Muziek Comment by jorden February 2018
  • Julian said: @jorden Great, installed it immediately! But my Slide cannot be connected to Homey, when trying to add the wheel keeps spinning. I restarted both Homey and Slide and Slide does respond to its own app.  Please let me know what e…
  • https://apps.athom.com/app/nl.innovationinmotion.slide
  • I read that article and was looking for more information for a while, this weekend. Seems that they have concentrated on better hardware for voice recognition, so that might work. However, I was unable to find reviews of the mark 1 and/or the open s…
  • lubbertkramer said: jorden said: The first version of this app for Slide-support in Homey is now done. I have submitted it for approval to the app store. It is quite basic but works really well: - Installation, the app searches for al…
  • That should be possible as long as you know what you're doing. However, I don't think it will make much of a difference. The signals are encoded in the drivers// file and are approximately 5 KB each. So before it makes a difference, you would have t…
  • The first version of this app for Slide-support in Homey is now done. I have submitted it for approval to the app store. It is quite basic but works really well: - Installation, the app searches for all Slide devices in your current network - The a…
  • swttt said: @Mathijs Their "understanding the speech" part isn't bad tho. The logic behind it is actually very good once Homey understands you correctly. And that is (what i think) exactly the problem. The part from text2speech sucks balls, but…
  • wjay said: Veldkornet said: Added on Github:  - Duplicate Image Tokens  - App Much Slower than previous versions Thanks, I have the same issue The first issue was fixed by rebooting Homey, the second is not a problem in m…
  • Nattelip said: why dont they have an ip api like the ziggo ones in this times of domotica , i have them from xs4all was used to ziggo , if i see the brown remotes at some houses of kpn likes it looks they havent updated the hardware the last 1…
  • Julian said: @PaulKessels In my case I have not heard the ticking noise they mentioned, so it will be hard to post a video of that. I have probably a good unit, because apart from some connectivity issues which are known and they are working o…
  • Some answers for you for as far as I have them 2. Both. Some apps are "heavier" than others, it's more the apps than the devices in most cases. However, in some cases (mostly where there is "polling" required to update the status of the app) the a…