This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

ingmar

About

Username
ingmar
Joined
Visits
618
Last Active
Roles
Member

Comments

  • Chico said: @ingmar Als ik je lief aankijk, kan je dan ook de alarm flows hier neerzetten? De verlichting is volgens mij af nu, alleen nog even spelen bij welke lumen de verlichting aan kan gaan. Hi, aantal lumen is lang testen, de …
    in Een flow Comment by ingmar October 2017
  • Chico said: @ingmar Bedankt voor de info. Moet toch nog wat sleutelen aan me flows, werd vanmiddag wakker en stond me lamp aan . Ik heb maar in de EN rij het kaartje ligt niemand te slapen toegevoegd, maar dat is ook niet alles. Als nu een va…
    in Een flow Comment by ingmar October 2017
  • Better logic app
    in Een flow Comment by ingmar October 2017
  • Kijk het even door en laat me weten als je vragen hebt.
    in Een flow Comment by ingmar October 2017
  • Chico said: Allen bedankt.  Ik heb iets in elkaar geknutseld, en ik denk dat dit moet gaan werken. Heb 3 flows en 1 hoofd flow. ALS deze flow is geactiveerd EN ik ben aanwezig en ik slaap en me vriendin is aanwezig en ze slaapt DAN start flow…
    in Een flow Comment by ingmar October 2017
  • DaneeDeKruyff said: I personaly wouldn’t consider this a bug, but more as a nice feature. Imagine you are working with states (based on time or whatever) and on a state change (day to night perhaps or when you go to bed) you change the dim lev…
  • kasteleman said: Ok, then it is in the Qubino device driver for that device. Can you make a github issue for it, so Athom knows and wil have a look at it I will, thanks
  • Chico said: @ingmar Nog een vraagje, ik heb jou hele uitleg over genomen en in flows gezet.  Nu vraag ik me alleen af, waarom zie ik bij de als kolom, zie foto ( ja is een andere foto van wat helaas niet werkt) bij komt geoforce binnen 3 tag…
  • kasteleman said: Is that for both the Qubino and the fibaro devices? Could you add the info abou the specific models? There was a bug in the past and it can be the case that it isn’t corrected for all the devices. Actually, it only concer…
  • Welkom op het forum, als je dit topic doorleest moet je er uitkomen: https://forum.athom.com/discussion/1910/app-owntracks-client-for-homey/p1
  • vaderag said: MrDutchfighter said: The 500 series is zwave+ Great - thank you! And to confirm, can you set up each tag with a different person's ID? (so I can know who is in / away?) yes, and also with a pin code
  • With default instalation it works, kind off. You have to add users first. Then put the tag reader in registration mode. Hit Home, present tag, refresh  your benext app settings screen in Homey, assign the new found tag to an user. Start with that an…
  • For motion detection? Just buy a motion detector at the gamma and hook up a fibaro binarysensor, https://www.hashop.nl/Zwave-bewegingsmelder-voor-buiten
  • This is as simple as adding a flow which captures turning on the light as below: In the middle I have a virtual switch as condition which puts to bed on or off. This could also be a variable which you set differently. Based on to bed is on you set t…
  • bvdbos said: You're think to complicated, like @Oy194 and @DanneDeKruyff say works to best....  Or, to give another solution, why not the other way around, after light turned off, set brightness to 100%. Setting brightness to 100% would …
  • RuudvB said: ingmar said: Eternity said: What I have learned is add permanent powered devices first while keeping your homey at its base location. That is not possible... To include a mains powered z-wave device, I h…
  • Eternity said: What I have learned is add permanent powered devices first while keeping your homey at its base location. That is not possible... To include a mains powered z-wave device, I have to have Homey within 1 meter distance...…
  • Fyi, my zwave problems are solved now. It has nothing todo with 1.5, but with devices who had bad or no reception anymore. One thing what did change is the zwave graph, actually the graph is fixed now as in the previous releases (<1.5) the graph …
  • on which homey version are you and did they work before? what changed?
  • Veldkornet said: ingmar said: My zwave is getting worse by the day... A simple on/off command to a fibaro plug doesn't come through often, the plug sits next to the homey. I see lots of repeating below in the zwavelog, as well to many …
  • What each time works for me is change a setting of the sensor, hit save. (dialog: settings will be updated on next wakeup). Then wake up the device (click the b button) and update the settings to the correct value (dialog: settings saved). Sometimes…
  • My zwave is getting worse by the day... A simple on/off command to a fibaro plug doesn't come through often, the plug sits next to the homey. I see lots of repeating below in the zwavelog, as well to many devices and they seem to fill up the zwave p…
  • home78 said: zimbra said: danone said: RuudvB said: ingmar said: Hi, great update but since I am on 1.5.1. I have huge delays with flows being executed. Walking into a room with a fibaro (or aeotec) motion se…
  • danone said: RuudvB said: ingmar said: Hi, great update but since I am on 1.5.1. I have huge delays with flows being executed. Walking into a room with a fibaro (or aeotec) motion sensor normally switches light on instantly, n…
  • be aware that an outdoor sirene is not always allowed by law, for most cities you require a permit
  • quakerix said: Does anyone know which tags you can buy that work with the Benext 500? the one that ROBBshop sells
    in Keypad Comment by ingmar September 2017
  • Hi, great update but since I am on 1.5.1. I have huge delays with flows being executed. Walking into a room with a fibaro (or aeotec) motion sensor normally switches light on instantly, now it takes about 10-20 seconds. On the app I see the motion t…
  • MennoVanGrinsven said: ingmar said: hi, since last update all flows containing Owntracks are broken :-( Are you aware of this? Yes I warned about the fact that the old topic based trigger cards would be removed on version 2 …
  • hi, since last update all flows containing Owntracks are broken :-( Are you aware of this?