This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
ingmar
About
- Username
- ingmar
- Joined
- Visits
- 618
- Last Active
- Roles
- Member
Comments
-
TedTolboom said: That’s the spirit @ingmar, if you can’t join them (devices), beat them (Athom) by creating the drivers yourself Thanks ;-)
-
Bram said: So, topic can be closed? yes please
-
verkoop ze toch niet en ga zelf een driver schrijven voor degene die het nog niet doen met Homey :-)
-
Seems to be fixed now, https://github.com/athombv/com.qubino/issues/21
-
it's like going to the casino, in my case 50% of the time it works, but is far from reliable... and also, even after the last firmware update, draining batteries is a problem as well. I am thinking of hardwiring the lock.
-
Amelsfort said: Restarting the app worked for a while. But now my Tado-devices are disabled again with a 'not_logged_in' message. Unfortunately same here, extremely annoying!
-
phil_s said: I restart of the app did it again. Both smart Thermostats are working again. Hmmm, strange. @GerritKool do restarted the app? works for me as well
-
konradwalsh said: ingmar said: konradwalsh said: OK I have resolved ALL of my ZWAVE issues. I will say.. WITHOUT ANY help from Athom Support. All I got back from them is that it must be the app developers fault - @Bram …
-
konradwalsh said: OK I have resolved ALL of my ZWAVE issues. I will say.. WITHOUT ANY help from Athom Support. All I got back from them is that it must be the app developers fault - @Bram Anyway.. heres what I did and I hope this helps someo…
-
most of the times it is a setting like "use remote gateway" on your vpn settings which passes all traffic through your vpn endpoint.
-
honey said: I have the similar problem with all the battery powered fibaro devices. The signals are often lost, particularly the motion cancellation signal. None of my Fibaro motion sensors are routed, despite the fact that they have mains powe…
-
Homeyuser said: Same problem here. My tamper alarm is also constant in homey. Motion sensors works sometimes (mostly not) after the experimental updates. Can you please fix this homey? A bit cumbersome, but re-adding the device did s…
-
lubbertkramer said: ingmar said: lubbertkramer said: Update with caution and only update an experimental update if you know what you are doing and what the risks are to prevent unpleasent situations for yourself and your home.…
-
lubbertkramer said: Update with caution and only update an experimental update if you know what you are doing and what the risks are to prevent unpleasent situations for yourself and your home. Let Homey run don't panic and don't PTP to early s…
-
fiek said: I am really happy with the update, I finally have for 99% no more delays in the zwave network. for the remaining 1% I can see that the zwave route to devices are indeed causing the issue. So that is a matter of re-adding the devi…
-
Eternity said: This is the first time I have delayed installing a new f/w. I am eager to test it, as I hope to be able to benefit from the z-wave improvements (and finally include my missing Spirit radiator valves, and delete non-deleted z-wave…
-
I installed 1.5.6-rc.6 and it look very impressive, it is at least stable! I like the zwave node routing table the most, it already gave me insight in that I have to re-add some nodes.
-
gunnerk said: sprut said: @Torrfura Uninstall the app and the previously added home, reboot the devices, and try again @gunnerk Did this happen on 1.2.4? or earlier? It is 1.2.4 When I installed 1.2.4 everything worked as suppo…
-
Menno, any idea why I get "parcing fenceArray/userArray failed, unexpected JSON...." now and then, causing all users to be removed and braking my owntracks presence flows? The only resolution is adding new users again, setting up the phones and wait…
-
kanhetwel said: When I open the Homey app on my iPhone, the playing stream to my apple tv stops. When closing the app the stream resumes. Has anyone a tip to use the app without closing the stream i'm watching? hi, disable microphone and …
-
Torrfura said: sprut said: The problem was reproduced, it is in the process of correction. Nice! Any update?
-
Charley said: Andreas said: I have three Fibaro Switches Two FSG-213 and one FSG223. I always have the issue that after 16-40hours the switches are no more reacting. Means either from Flow and also not from the direct Userinteface. Can…
-
OpenMind_NL said: @Jon , @jpcouprie , @2Be Just curious... Did you already test the GitHub version? https://github.com/OpenMindNL/be.geekness.tado I did, working perfectly!
-
ingmar said: installed and testing, 1 thermostat and 7 radiator knobs :-) and so far so good, was able to add all devices without any issues!
-
installed and testing, 1 thermostat and 7 radiator knobs :-)
-
caseda said: @ingmar: full "dictionary" for zwave is public: http://zwavepublic.com/specifications Mind you, in total it is about 2000 pages. Currently there is no build in way to retrieve current state of parameters in homey settings, have be…
-
HarryBuurman said: I dont know if this is device specific, but I'll start more general. My current situation. I have a Fibaro Smoke Detector V1. It beeps periodically which is setting I should be able to change in the interface. Steps I to…
-
OpenMind_NL said: Just for fun... because it made me jump when I saw it worked when I opened a window Cool! can't wait ;-)
-
Hi, check your zwave logs, I'll bet you many have timeouts reaching that fibaro device. I blamed Athom before as I was/am experiencing huge delays as well. In the end, they pointed me out to the zwave logs and the were right. I had to physically mov…
-
ErwinVrieze said: I use both (still) KAKU and Fibaro, the big advantage with Fibaro is, it keps tracks of its position, and now with the "dim" possibility (not tested yet by me), If this works fine, I'll replace all KAKU with Fibaro (also you c…