This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
ingmar
About
- Username
- ingmar
- Joined
- Visits
- 618
- Last Active
- Roles
- Member
Comments
-
Hi, great app! is the tagreader 500 now fully supported or... ? I mean, I can add an user pin and I can add a tag. Next I can connect assign them to an user. In my flows I am able to get the armed status and I am not sure about the disarmed status. …
-
MennoVanGrinsven said: @ingmar I really need to find time to write stuff down about all this. Sounds familiar ;-)
-
MennoVanGrinsven said: @phuturist @ingmar is the only one that can change the first post. But indeed MQTT is the most secure solution. Only problem is that the username that you login with is used by the owntracks app as user and as such also…
-
dennis91 said: Hi Guys, I think i need some help with the OwnTracks integration... yesterday i've set it up. Pushing messages from my iPhone to MQTT is working fine (i can see the messages coming in on Homey), he also nicely added the Zones i'…
-
techniman said: In the Owntrack client did you publish the waypoints/regions? I found the iOS app very unreliable (not really usable) I've been looking in other solutions I don't agree, it is used by many, many users and incredible …
-
MennoVanGrinsven said: @ingmar see above Hi, I am still using the method as I started this topic with because... if it ain't broken,dont try to fix it ;-)However I see you are adding very nice stuff so I will look into it in the near fut…
-
MennoVanGrinsven said: @ingmar Are you still using owntracks? Would you consider updating the guide with the latest changes? Hi, I am sorry I didn't follow this thread for a while. I am still using the owntracks. What do you want me t…
-
Yannick said: yes done all that and studied that booklet intensively but it just never comes into range. Here is a screenshot of my config: Strange... Buy a raspberry and it will work ;-)
-
Yannick said: ingmar said: Yannick said: Anybody got bluetooth beacon working? I just received mine from China. I'm able to see it in LightBlue and configured the region in Owntracks with the UUID found in the Lightblue (beaco…
-
Yannick said: Anybody got bluetooth beacon working? I just received mine from China. I'm able to see it in LightBlue and configured the region in Owntracks with the UUID found in the Lightblue (beacon diagnostics app), but it beacon icon always…
-
chrisboer said: You know what is really cool about this app and service, you don't require any other location service anymore because you can trigger with owntracks if somebody is "aanwezig" or not so you don't need homey to be on the backgroun…
-
jimmy_zeropm said: I've found some interresting outcomes with the sensors motion detection range. I've marked the sensor in 4 even parts on the outside. I then turned the sensor bit by bit over his axis and suddenly I gained 2+ metres of detect…
-
caseda said: @ingmar could your try to wake up your sensor manually nearby homey once and let it completely timeout on its awake state (blue led on to automatic off) will do, and then check the logs?
-
TedTolboom said: @ingmar @jimmy_zeropm can you provide a section of the Z-wave log where the `Error: TRANSMIT_COMPLETE_NO_ACK` is shown. In principle, this is the response that Homey sends a command to a device (TRANSMIT_COMPLETE) but that the…
-
jimmy_zeropm said: @ingmar I do, I see this coming back very often in my logs. Could this has something to do with the short blink I see on the sensor. Iow, when motion is detected there is a long blink, and sometimes I see a very short blink..…
-
ingmar said: ingmar said: TedTolboom said: ingmar said: Thanks ted, I appreciate it. I will try updating the settings again with your instructions. Basically, if there is just one motion sensor connected and only one se…
-
ingmar said: TedTolboom said: ingmar said: Thanks ted, I appreciate it. I will try updating the settings again with your instructions. Basically, if there is just one motion sensor connected and only one sensor in total, I would…
-
TedTolboom said: ingmar said: Thanks ted, I appreciate it. I will try updating the settings again with your instructions. Basically, if there is just one motion sensor connected and only one sensor in total, I would be able to get temper…
-
TedTolboom said: ingmar said: Thanks ted, I appreciate it. I will try updating the settings again with your instructions. Basically, if there is just one motion sensor connected and only one sensor in total, I would be able to get temper…
-
TedTolboom said: ingmar said: jimmy_zeropm said: I've managed to add the sensor and it works. But I'm not impressed with the sensitivity of the sensor. I'm using it in a room of 5x5 meter and it's set on the center of a wall. …
-
jimmy_zeropm said: I've managed to add the sensor and it works. But I'm not impressed with the sensitivity of the sensor. I'm using it in a room of 5x5 meter and it's set on the center of a wall. But it hardly senses motion further then 3-4 met…
-
webwalser said: i have now two flows but that would for my case (i work everywhere in the country) that i must make hundreds of flows so anybody got another idea I guess you shouldn't use the condition card (middle) but just let ho…
-
MennoVanGrinsven said: Oh and I published a new version :-) Thanks Menno for updating the app, I really want to get my hands on it with the beacons, wildcards etc. I will get back to you asap for more stuff, but I am currently snowed u…
-
juroz said: I still cant get past the login and password. Any known sollutions? hmm, strange, I have the 1st generation of Woonveilig which is working for a while now (including today), totally no problems. But... In the homey settings s…
-
MennoVanGrinsven said: @Ingmar if you want to see all the messages that the phone apps are sending, create a dummy flow with a trigger card that contains owntracks/# as topic. Subscribing to that topic means that all topics beginning with own…
-
MennoVanGrinsven said: @ingmar cool it is working Created a tag "Gebruiker" and set a variable you get the variable menno with value enter (or leave) You know that when you enable "extended data" you can have homey tell you when to …
-
MennoVanGrinsven said: The iBeacon proximity is a bit hard. First it is iOS dependent. Second the beacon message is a separate message. That means I have to store received messages per user. The question also is how to relate the beacon message…
-
ingmar said: MennoVanGrinsven said: @Ingmar almost I already have the users in an array, so I can give the userid back as tag so it can be used in something like better logic. Hmm that way we can even get rid of the need to enter …
-
MennoVanGrinsven said: @Ingmar almost I already have the users in an array, so I can give the userid back as tag so it can be used in something like better logic. Hmm that way we can even get rid of the need to enter a topic. would…
-
MennoVanGrinsven said: ingmar said: MennoVanGrinsven said: @ingmar You know that the owntracks app supports wildcards in topics. So if you have a generic geofence name for home, you can create a trigger card with topic owntra…