This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
cjvs
About
- Username
- cjvs
- Joined
- Visits
- 1,422
- Last Active
- Roles
- Member
Comments
-
k1s said: What does 'Length' mean? I tried 14,1,39321, but it Homey said 'value out of bounds'. I don;t know which value it's talking about. Length is the parameter size, which is 2 for parameter 14. --> 14,2,39321
-
Not sure how your wiring is setup... However, have you tried to set to set parameter 14 to 4369? More info in the fibaro manual https://manuals.fibaro.com/rgbw/#post-1062 Seems like you want to use "NORMAL MODE" and control one output with one swit…
-
I use one flow for this. WHEN "motion detected" THEN 1) "switch on light A" 2) "switch off light A" including a delay of xx seconds (click on the small clock and set the delay).
-
Ik gebruik de volgende pulsdrukkers met mijn fibaro schakelaars (dimmer 2): - Enkele schakelaar (dus alleen de S1 van de dimmer 2 schakelen): https://www.elektrobode.nl/products/berker-wipimpulsdrukker-basiselementen-5031 - Dubbele schakelaar (S1 …
-
Ype said: Thanks, i already found the app. The flow's are working, but because, but when the wasmachine is ready and i switch it off it still uses between 1,6 en 1,7 watts The count down starts over and over again. I am afraid that at some poin…
-
The Homey (preview) app just gobbled up over 1G of data over the past few days! Be warned. Will make an bug report.
-
Using the CountDown app: Flow 1: IF contact opens, THAN start countdown timer 60s Flow 2: IF timer reaches 0 THAN send push Flow 3: IF contact closes, THAN stop timer Works for me.
-
Fibaro RGBW @ EUR 37,99 https://www.amazon.de/gp/product/B00DZ3VKZS/ref=s9_acsd_hps_bw_c_x_2_w
-
Count_B said: I have re-added the fibaro switch but still it doesn't respond when I press the S2 switch. I have created a simple flow that when the S2 switch is pressed, homey says something. Any ideas? I had similar issues (with a fibaro dim…
-
Installation went well. However, my hue bridge was without network connection during the update, and this "deleted" the "all the hue lights off" cards in my flow. Really like the new tag and duplicate functions in the flow manager! Keep coming with…
-
Something different; I have a Fibaro RGBW controller with a Ikea dioder RGBW strip hooked up to it. Controlling it with homey is not an issue. However, now I want to control it with a toggle switch connected to the GND and I4... (wall switch to tur…
-
Philips Hue 3 led bulbs (color) + bridge on amazon.de for 119,- https://www.amazon.de/gp/product/B016151IRQ/ref=zg_bs_lighting_1?ie=UTF8&psc=1&refRID=F83XWHD711M31P3MAKFS Only today...
-
cjvs said: Tried all of these. However it is impossible to close or open my curtains (forest) or awning (somfy) with voice command... Homey even tells me "closing curtains" or "closing window covers; closing covers", but nothing happens. Creat…
-
.
-
ErikVanDongen said: cjvs said: Whooohooo; forest shuttle has been added... Now I only need to figure out what to say to homey, as I am only able to control my curtains through a flow Enough trigger words to get sum of the import…
-
Whooohooo; forest shuttle has been added... Now I only need to figure out what to say to homey, as I am only able to control my curtains through a flow
-
Had the same issue, left it on automatic location detection, and time was OK after a reboot (on 0.8.30)
-
Just received my homey, and all seems to be working well! Thanks a lot Athom for all the nice work. @Emile is there any update on the forest shuttle app being ready?
-
Djeezzz, a lot of guys speculating the sh!t out of this topic again... I believe the guys at Athom are far from stupid, and will take each step with due consideration. Time will surely tell...
-
Only 5 more to go to get to the first 100!
-
@JPe your zip seems to be corrupted... could you upload it again?
-
Emile said: ;-) @Emile I have not seen the support for forest shuttle RF return in the timeline or between the available apps. Is it built in in another way already, or does is still require development?
-
@JaapPelt : Google keep does not seem to have an API... I had the same thought. So anyone who knows where to keep a shopping list with an API to have homey add items to the list... please share your thoughts...
-
You guys obviously seem to care less for the environment... with a TV using 50 to 400W pending the size, model and age, plus a receiver of 30W, you are burning energy whilst Homey is already sitting there... (using a lot less energy)...
-
Well, it should off course only be simulating TV in the evening hours, and a simple flow should be able to turn it on and off... (just like the lights). Thought that would be stating the obvious...
-
Emile said: What would you guys see possible with Motion Sensors? When "away" and motion detected, trigger camera to record for 30 seconds and push message (preferably with snapshot); except when motion is triggered due to curtains closin…
-
The Nest API does not (yet) make these sensors available... The ui_color_state is referred to in the API, but I am not sure it it can be used to push any motion detection to Homey. (i.e. when the white pathlight goes on, it implies motion is detecte…
-
I have three nest wired nest protect v2 at home for a few months now. They have not given me any issues sofar. The pathlight goes on once you get closer, so the family can find the bathroom, without it being pitch dark. Furthermore, they are indeed …
-
@Moek: The forest shuttle z-wave controller is supposed to have position feedback (and should allow intermittent positions to be programmed). The RF controls are either "open", "stop", "close" and does not have something like "80% closed". (However…
-
For those with the forest shuttle rails: When asking Forest to provide me some more details on their RF protocol, they replied that they could not provide any info. However, they did indicate that they were already working with Athom to implement t…