This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
cbh
About
- Username
- cbh
- Joined
- Visits
- 1,283
- Last Active
- Roles
- Member
Comments
-
Tried Chrome, Edge, IE - same result. Funny thing is, that if I use the "copy" or "rename/move" functions, the folder hierarchy is there:
-
Looks like this: "Showing 0 flows in 0 folders" and stays on "flows: loading..." The Realtime Homey Logger page works fine, though...
-
Yes, tried that. Doublechecked ip-adress, tried with and without :80 in the end as well.
-
Awesome app... :-) Could have saved me a serious load of copy-pasting screen shots when doing a factory reset a month ago... Only problem is, that it only loads the first flow - like described here https://github.com/irritanterik/homey-realtime-log…
-
caseda said: be carefull though, some of the cheap power banks can load the battery and put out power, but as soon as you disconnect power to the input they will (very short) take the power off the output, this very short amount of time can be …
-
Seems like you did get me wrong anyway, @tb1962, as I had no intent to offend you - just to have it clarified, if you had experience with the model mentioned - I wasn't sure... And by knowing you actually do have that model and knows it doesn't work…
-
Agree on stability. And on features: Imagine, if the Sonos app made it possible to control Sonos as it is possible with the native interface (and even add some missing functionalities to that)... If TuneIn radio stations could be controlled, if it d…
-
@tb1962: As if you have a device like the one @danone mentions and can positively confirm, that it is not working - or that your argument is probably in any way totally correct, but nevertheless run over by reality, that is, that although it should …
-
Bought a RAVPower 10400 back in May - but my experience is, that it looses power just long enough to kill Homey :-( (Not happening for you guys, @RamonBaas and @RuudvB?) Anyway, it's probably too late to return it now, if it's not supposed to behave…
-
Very interesting - would love to see it - unfortunately, the app crashes... Something with running fw 1.5.6-rc.7, perhaps? Error message include a DeprecationWarning (https://github.com/exeldro/com.insights.aggregate/issues/1)
-
@ericjanvanputten: Hope nobody figured out how to update Fibaro-FW without excluding etc. from Homey - and didn't share how - that wouldn't be nice... And I haven't read anything anywhere about it... Anyway: My Fibaro devices are all <6 months …
-
Hi, Went through the process a month ago - using the only way I know about: removing devices from Homey, add them to HCL, getting HCL to update and so on - just as cumbersome as it sounds. You describe it as it is possible to make some kind of "bri…
-
Hi, have a Aeotec Recessed Door Sensor Gen5, Homey FW 1.5.6-rc.7, Aeotec app 1.6.0 The sensor is included and visible in Homey, settings can be changed and stored, and looking at the log, status is transmitted and received by Homey, but nothing happ…
-
Hi @gruijter_dev, You're completely right, it can be done by making several flows - and as far as I can figure out, neither Better Logic, Virtual Devices, or Device Groups can provide shortcuts on that - I just like keeping the number of flows as lo…
-
Doing it again - now with other non-existing node-ids (152 and 128). A total of five devices are routed via the non-existing node 152 (and four of these on via the non-existing node 128). Node 62 is a Fibaro Dimmer 2, nodes 74 and 75 are NEO Motion…
-
Hi, just an idea for a new feature: Making som kind of "whitelist" feature or "group" feature in settings that can then be referred to in a flow card - kind of the way the "Devices" flow card works with any, some, none in a zone. Like in the flow b…
-
Well, even if https://www.linuxatemyram.com/ says my RAM is fine, the problem still is, that somethings going on at the system is getting sluggish... It might be, that the size of the swap file isn't part of the problem, only a symptom and that rebo…
-
Thanks - actually, I already tried it. However, if possible, I'd like to find the cause and look into the origin instead of having to reboot the system frequently...
-
@Baron: Regarding structure for naming flows: To start another place - the devices themselves: [node-id] [type]-[location] [manufacturer/model]. Using the node-id makes it easier to make direct associations and search the devices in the list when ma…
-
Looking at GitHub, I think it won't be long until they are supported: https://github.com/athombv/com.fibaro/issues/187
-
That could definitely be the answer, @tedtolboom - but I don't think it is, as I made a factory reset and didn't reach higher node-ids than 81 until now...
-
Info and picture of mesh added (the z-wave tag in the headline was there from the beginning ) And now the non-existing nodes have disappeared again... Homey is pranking it's user, it must be...
-
@JPe: Been there, done that ;-) Checking whether everything/something is on is easy - and definitely the flow cards made for this is very useful - especially to avoid making a flow that checks devices on an individual basis. But you're right - I ju…
-
Eternity said: Why don't you use 'luminance is smaller than XX", but math.js expression? Don't know... The standard logic card is, well, the most logical to use... Think it must be a leftover from having som kind of calculation at some …
-
Did a factory reset som weeks ago - something was wrong somewhere and I could not figure out what or how to fix it and as I was doing a lot of testing on the upcoming SDK2 version for the ZHC5010s I decided to reset all. Therefore, to try with an a…
-
@fiek: Adding stuff close to Homey and then moving it somewhere will not help. In general terms (how z-wave works, not specific to Homey): When adding a device, the surrounding devices will be taken into account when the z-wave-system plan the most…
-
Installed 1.5.6 yesterday - until now haven't encountered any problems...
-
A major difference is that the Fibaro can be added as secure while the Neo cannot. Therefore, if you plan to make direct associations to e.g. Fibaro Dimmer 2, you have to choose the Fibaro sensor - if you only plan to use flow cards in Homey, the Ne…
-
Works fine for me with a single sensor (in the stairs) - but it shouldn't be difficult to make a flow that "averages" or use "the worst" value of multiple sensors...
-
Maybe you should flip the logic in your plan? The flow is triggered by changes in the sensors value - but what if you rephrase the "question": Within a certain time interval - if it is dark - then the lights should be turned on? Then you could use …