This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
cbh
About
- Username
- cbh
- Joined
- Visits
- 1,283
- Last Active
- Roles
- Member
Comments
-
A possible solution to the question here, but posted here, as it's flows that are working :-) I have some lights that I would like to turn on when it's getting dark if someone are at home - but not if the house is empty. Further, I want the lights …
-
As mentioned here: https://forum.athom.com/post/quote/4296/Comment_63614 I would delete the app at the phone, delete the phone in Homey, reboot, install the app at the phone and login - and then try again :-)
-
Presence detection was quite unreliable for me in the beginning - but it has been working extremely stable for a long time now (although yesterday my son was angry that it didn't detect him coming home - but we discovered his phone was turned off). …
-
Thank you for your replies @bvdbos and @GeurtDijker , What I have is: 1) a gate, 2) a remote (Tedsen SKX1WD), and 3) Homey. It's only one-way communication from the remote to the gate on the 433 MHz band and the code it not rolling. I can record t…
-
Would never have found out by myself - thank you, indeed! The app installs fine now - but when trying to add a device in Homey, the signal is not recognised - and the device therefore not made. I'm a total rookie, I know, but if I can't add a device…
-
Cool! When trying to upload via CLI I get an error message "signals.433.aDoorbell: invalid_sensitivity" Guess I should edit the code somewhere first (?) - but I can't figure out where? A little word of guidance available? :-)
-
Anyone who already made the most basic app of all: The app of one button sending the same 433 MHz-signal every time without listening for anything? I have the signal (recorded) and all I need is a way to send it - and if someone already made that k…
-
In DK the price is app. the same for the fibaro rgbw and the qubino flush shutter - and the fibaro is supported by homey - whether you use all the terminals or not - it will work :-)
-
Just remember something somewhere that resets the variable after the value has been read - otherwise you cummulate the time for all occasions :-)
-
Or: Flow 1: Triggerflow IF "conditions met" THEN "Set Better Logic variable X = true" AND trigger Flow 2: Flow 2: Count seconds IF "This flow is triggered" AND "Better Logic variable X = true" THEN "increment Better Logic variable Y with 1" AND "Tr…
-
Being able to poll the status on demand would be brilliant! Even if that is the only function in the app, I'd be happy :-)
-
Got 2x Doorman :-)
-
@lubbertkramer: Thank you so indeed - I figured out it was not an app and would have wasted a lot of time trying to figure out how to install it failing in the end - if not rescued by the bell and the forum!
-
I know somebody knows the answer ;-) It's not a matter of trying to convince somebody to make a new app or implement new features (although I'd applause it) - but if someone could just give a hint if I risk breaking current flows if I install the co…
-
Just an example on a flow using the app: https://forum.athom.com/discussion/comment/62308/#Comment_62308 And: The "autocomplete" feature showing devices (online? known?) is awesome!!! Let that be the new standard in each and every field in any form…
-
Two very simple, but energy saving flows, using @gruijter_devs new app integrating (some) Netgear routers: Until now, I had the power to my printer turn on/off as part of some flows dealing with presence - if me or my son was at home, the printer w…
-
If you need someone to help "sharing" the testing, let me know - I'll be happy to install your draft
-
I understand your frustrations - I've had my turns with Homey, too, and after a few weeks I was ready to send it back to the dealer - luckily he made me reconsider and now (especially after I tested another z-wave controller in comparison) I'm defin…
-
Netgear Nighthawk X6 R8000 working fine with v.0.0.7 - including device on-/offline. Are you planning to make flowcards available to the "AND"-column? Would be awesome if flows could be initiated by other conditions and then executed depending on w…
-
If you want to do it with multiple dimmers (and the value should be the same for all) I will for sure go for a variable ;-)
-
Maybe you can get the solution you're looking for, by making a variable (in Better Logic, e.g.) and then some flows adjusting it as you like during the day and then using that variable (drag it from the "Tags"-drop down to the set brightness" on the…
-
The device is a blind from https://www.byartandersencph.com/en/ (unfortunately they haven't made an app yet). @danone: Yes, tried all possible combinations of what they write in the manual... @caseda: Will the other devices not still try to use the…
-
Stand-alone updater for ZHC-5010 fw 2.0.2 now availble: http://logichome.dk/index.php/10-support-categories/6-zhc5010-firmware
-
Wrote Fibaros Head of Sale Lukas Tobis (l.tobis@fibargroup.com) why Fibaro won't make firmware updates available to those who bought their physical devices but not their controllers. Got the following reply from their Techincal Support: "Firmware up…
-
Firmware 2.0.2 available: http://logichome.dk/index.php/10-support-categories/6-zhc5010-firmware (A manufacturer, who really reacts quickly on reported errors - cool!)
-
New firmware v 2.1 (edit: 2.0.1) now avaliable: http://logichome.dk/index.php/10-support-categories/6-zhc5010-firmware (need another z-wave controller (edit: z-wave-stick, such as the UZB from z-wave.me) as update via Homey is not avaliable yet, th…
-
I've got the Link-system (radiator thermostats only, though) - you can pair them with Homey as generic device, and nothing further. Haven't tried with the new app yet - but guess it won't change a thing - Danfoss tech-support (DK) told me it is not…
-
Cool!!! My utmost respect for going through the subject like you do - and thank you for taking your time, @GeurtDijker! No doubt integration with KNX is not something easy, even I could figure that out - and I agree, that KNX (IP) is probably the o…
-
Cool :-)
-
Be aware, that Danfoss have different z-wave models: Will ONLY work with Danfoss' own controller 014G0001 014G0002 with firmware 3.02 / 3.04 / 4.02 Should work with third party z-wave controllers: 014G0002 with (old) firmware 2.06 014G0012 with …