This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
canedje
About
- Username
- canedje
- Joined
- Visits
- 920
- Last Active
- Roles
- Member
Comments
-
Where to find an simple user install guide for owntracks?
-
canedje said: Rocodamelshe said: Nothing wrong with ur English. For the question part: Did u check on github for possible issues? No I didn’t. I will check tonight It is indeed the same problem. I added my situation to …
-
Rocodamelshe said: Nothing wrong with ur English. For the question part: Did u check on github for possible issues? No I didn’t. I will check tonight
-
RuudvB said: caseda said: @RuudvB je kan de standaard "set hue" en "set saturation" kaarten gebruiken voor kleur, dit zijn dim sliders wat je een nummer tag op kan plaatsen. Je hebt helemaal gelijk, alleen heb ik dus 4 kaartjes …
-
techniman said: As a workaround I've done the following: Setup an home-assistant instance Setup owntracks on both phones (iOS and Android) and HASS Added a ping switch for both phones in HASS Added the automation mentioned here: https://comm…
-
dennis91 said: Rocodamelshe said: Strips waren toen nog niet langer dan 2 mtr en de hoeken zitten op 2,25 mtr ja. 4 losse strips is wel een must, moet wel rood/wit/blauw kunnen natuurlijk voor ALS we ooit nog een keer een toernooi mee …
-
RuudvB said: I have seen the comments in the app store after the latest update, still I do not understand the logic to this decision. I have about 8 persons to monitor, now it looks like everyone is at home... For me, not every change turns …
-
quakerix said: Hi, Smart has been running stable again for a few months since my last instability. But today, somehow, someway, i was set to away two times while i was at home. So I wanted to go debugging. But when I look at my devices: …
-
ehdegroot said: kun je het dan niet zo instellen dat als je 1x op de knop drukt, homey je de status vertelt, en als je twee x drukt, hij de status omdraait? Zo iets heb ik idd gedaan. De bovengenoemde DIM flow werkt niet goed bij de IKE…
-
A known issue. presence is not reliable at all smart présence is also not doing the trick since new smartphones disconnect from WiFi because of energie use reduction In this topic there is a solution for android users: https://forum.athom.com/discus…
-
techniman said: 2. I have the same device and for me it's working normally did you pair it using the generic zwave or the Remotech app ? 3. try excluding the Remotech, that usually fixes zwave issues 4. install the Homey app* on your phone…
-
glijie said: Make a VT button called Pietje with for example KAKU. make these flows IF Pietje enters the building THEN turn on Pietje IF Pietje left the building THEN turn of Pietje succes smart!
-
Ik heb nog een vraag. Ik ben van plan de Remotec zo te gebruiken (Ik heb hem nog niet binnen) dat 1 knop o.a. een toggle functie heeft. Zo ver ik weet heeft de Remotec geen visuele terugkoppeling om de status te zien of een knop is ingedrukt of niet…
-
Ondertussen een Remotec besteld. Ik ben benieuwd of ik de DIM functie aan de praat krijg.
-
That looks like dead to me. Very small change it will work. At least before any test, I would try to remove corrosion first
-
Eternity said: Will do so, once home. I was always able to quickly see if my children were home, via the Better Presence icons. Will try to find a new way to achieve this. Other apps do have the ability to check status at the TAG part …
-
How did you restart? I had the same in the past. I did a PtP (Pull the Plug) for at least 10 minutes and started Homey again after that period. Everything was fine after that
-
Rocodamelshe said: canedje said: Niemand een voorbeeld van een basisflow om een dim functie te maken? Hier staat een goeie. Thanks. Dat is idd een mooie start van wat ik bedoelde. Edit: Wow. dat iemand zo iets kan beden…
-
caseda said: maximum amount = 232 devices, which includes homey, so in theorie 231 devices. (you could have googled that btw) and no, it will round robin at the end and start at the beginning, of course skipping the numbers already taken then …
-
Niemand een voorbeeld van een basisflow om een dim functie te maken?
-
Jeroenvano said: Indeed this is not working for me as in the app all now look to be at home when they might not be. This is loss of visual functionality Indeed. In the flows absence is detected. But visual not possible to check. I don…
-
GeniusXL83 said: Since last update of the smart presence app I have a problem with the status of the device. When a phone is disconnected from my wifi the status of the device is not adjusted, I cannot see the broken chain in the device. When I…
-
Dank jullie voor de tips voor de bediening. Ikzelf vond de Zigbee KaKU ZYCT-202.. Helaas wordt die nog niet ondersteund door de app. Nu de dim flows nog
-
Thanks. The Remotec Scene Master looks nice. I do have these KaKu remote control. I forgot about it Does somebody nows flows to control DIM functionality?
-
Nice idea. Looking forward to it
-
OsA said: Ik heb de eerste kunnen koppelen bij het 2e exemplaar komt te melding dat deze reeds gekoppeld is. Hoe kan er een ander ID geforceerd worden? Hem eerst weer verwijderen bij instellingen->z-wave->verwijder een apparaat
-
@ Veldkornet : Nice find! Good to know. Hopefully it will be fixed soon.
-
Rudolf said: hoe kann ik mijn oude mobiel uit omey krijgen mvrgr Rudolf Zie 1 commentaar boven je: https://my.athom.com/#/phones
-
On the site of Robbshop there is an example. Possible fits to your question. https://www.robbshop.nl/domotica/z-wave-projecten/z-wave-deurbel?sqr=deurbel&
-
I just installed 0.2.2.. I'm up and running again. It is working again Thanks!