This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
arthur
About
- Username
- arthur
- Joined
- Visits
- 364
- Last Active
- Roles
- Member
Comments
-
You could consider flashing your Sonoffs ith the Tasmota FW. Then you can add them to Homey
-
You have to set thresholds on the device. If these thresholds are reached the ST814 will report them to Homey. I've set 2 thresholds for humidity and use them in flows to trigger the fan in the bathroom.
-
Het pairen van een nieuwe sonoff/tasmota werkt bij mij het beste door gedurende het zoek proces van de app de sonoff te (soft) rebooten. Daarna wordt ie meteen herkend. Misschien helpt dat? Ik je screenshot zie ik ook dat ver versie 5.10 van tasmota…
-
@Undutchable62 Heb je al eens geprobeerd om vanaf een andere machine is hetzelfde netwerk een tcp verbinding op te zetten naar je homey met mqtt broker enabled? Het command "telnet 1883" zou in ieder geval een connect moeten geven. Als dat niet wer…
-
In de PIC van je broker staat dat deze niet actief is. Misschien ff starten?
-
Update completed in about 20mins. And all Apps (29) seem to be running okay. No clue why it initially failed, by i expect a corrupt or incomplete download as the root cause
-
User interface was reachable hence I could determine the version not yet updated. Checked the CPU which was at normal idle load Rebooted Homey, waited until apps were started okay and cpu load got reduced to normal idle load Then retried the update,…
-
Started the upgrade 2 hours ago, how to tell upgrade is finished? System version still reports version 1.5.3 The blue bar slided to 95% and now is gone. Is it safe to reboot and retry?
-
How long will a typical update take from 1.5.3 to 1.5.8?
-
Hi Robert, Great I create an issue on the project's Github page with all requested details. feel free to connect for additional information and testing!
-
Hi Robert, I like your App to support the Sonoff with Tasmota support! Would it be possible to support the Sonoff POW and TH16 versions as well? Using MQTT client I'm having trouble decoding the JSON response for the POW and AM2301 responses. Would…
-
Good one, I must have overlooked this product. Also good to learn that it works well with homey
-
Having the same issue on the ios app
-
I had the same problem. I deleted the device and recreated it. After that it works flawlessly again. (Do this for every registered smartphone)
-
@TedTolboom In the ideal world you'r right however, i bought 2 supposedly supported bulbs and both turned out not natively supported at the moment. If I knew that beforehand, i wouldn't have wasted my time and get (slightly) frustrated on it.
-
@GeurtDijker, Mijn GU10 heeft 5 LEDS in een 'cirkel'. Ik heb een Github Issue aangemaakt om deze nieuwe versies toe te voegen aan de App.
-
The assortment of IKEA Tradfri seems to be growing fast by creating lots of variants. You have to be very careful when selecting the right bulb with desired capabilities and App support. Maybe it would be best to add the IKEA part (article) numbers …
-
@B3rt, jij hebt dus een ander product ID dan ik. Ik vraag mij af hoeveel versies er in omloop zijn :-( @GeurtDijker, Ik denk dat ik dezelfde GU10 heb, helaas het ik het doosje al weggegooid. Deze GU10 wordt als generic Zigbee (On/Off) gezien door ho…
-
Artikel nummer 603.652.71 is een E14 kaars met als prijs 6,99. Dit artikel kan in online niet vinden op de website, ligt wel gewoon in de winkel (Heerlen en Utrecht) voor genoemde prijs. Ben nog steeds benieuwd naar jouw Product ID, Device ID en Pr…
-
@B3rt Misschien heb je een andere versie? Mijn E14 lampen waren nl. 6,99 p/s. Kun je de Device information posten van jouw versie?
-
Enige teleurstelling met deze lampen is er toch wel. Zowel de E14 als de GU10 versies worden niet herkend door de app maar toegevoegd als generieke On/Off lampen. Het is dus niet mogelijk om deze te dimmen of de color tone te wijzigen. Voor het pr…
-
Same crash here as well
-
@aloft Don't know what happened exactly, but following a reboot I noticed the flow was set disabled. Re-enabling it fixed the issue. To date it still works just fine!
-
Issue with SP103. Motion is detected correctly when watching the device status. However the flowcard "De bewegingsmelder gaat aan" / "Motion detector trigger on" doesn't fire. @aloft: how can I best provide debugging information in this case since…
-
Weird, I had to reset homey back to defauilt settings (wiping all data) before I could add zwave devices again. Off course that was only possible after resetting each device before including them in the Z-Wave network again. Hopefully that won't h…
-
@caseda That should explain it as I selected " Light" as the connected appliance. For this application, metering is not particular useful, but for future applications it might be.
-
Fibaro wall plug is not reporting power load using default settings. Power switching however works as expected. Looking at the manual I do not see a reason why it shouldn't work. Any tips? The device card only show the wallplug graphic and the on/o…
-
When I click " Connect to IFTTT" from the homey settings screen through the OSX desktop app I get an empty windows named "Athom" and nothing happens? I would expect a login dialog, anyone else experienced this? And yes, same behavior with Chrome, …
-
When adding a LC13 device I get this error: Cannot GET /app/com.danfoss/drivers/LC13/assets/learnmode.svg Is the app broken?
-
@aloft thanks!, I completely overlooked it. Sorry