This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
aloft
About
- Username
- aloft
- Joined
- Visits
- 48
- Last Active
- Roles
- Member
Comments
-
Hero of the day! I had to zoom out to 25 % to see all my flows (many flows, small screen), which didn't increase the readability, so I had to zoom out, guess a bit which one, select and then zoom in again. This helps a lot while waiting for the be…
-
MartijnHarte said: Afaik is the sonos app dependend on the media manager, so don't expect it before the media manager is released. I am still trying to grasp this statement, which I see repeated with regards to Sonos. I need Homey to act…
-
Fire69 said: aloft said: I get the error: extractpath_not_writable ; I'll reboot and check again and report an issue if it persists after the reboot. Same here. Rebooting now to see if that solves it. My remote reboot …
-
I get the error: extractpath_not_writable ; I'll reboot and check again and report an issue if it persists after the reboot.
-
@MennoVanDerAat ; Yes, My luminance is also working. A new luminance is only reported when there is a change in luminance. I added a parameter to update every 30 minutes. I now have an extra flow that sets the luminance in a BetterLogic number, but…
-
Uranday said: Make a number variable, create flow that assigns the output of the card to the variable. Use the special assign card that I thought is called set a variable (sry, not behind my pc. But you can recognise because the dropdowns show…
-
I just had to do a reboot due to issues with Zwave (no response anymore, restart zwave chip didn't help). After that, Zwave was back, but now all 433 Mhz communication is lost ( i have a mix of Kaku and Action sockets). The first reboot didn't get …
-
@Alle thanks for your input, unfortunately, it didn't work for me, maybe for @mruiter ? It seems setting the 121 parameters isn't accepted or sent. @Taco ; do you have updated information on the logs that I sent?
-
@MennoVanDerAat I have 3 variables defined in BetterLogic: - counter_motion : number - status_light: boolean - status_counter_running: boolean
-
Uranday said: That's already possible with the set a variable that converts it if possible. I am not sure I am understanding you correctly, but I am sure the fault is on my Denglish-side ;-) When I add a new variable in Bet…
-
But for my understanding, are you looking for ad hoc checks... Output of card against an inputted value in the condition? Droptoken => 3. Or do you want to check the output of a card against a variable? So VarA=3 and a condition that says drop…
-
To add to my own post, doing some extra tests: I can compare the luminance with the Homey's built-in logic. Update of luminance is not predictable yet. I added an extra flow 6: when generic alarm off > turn boolean2 to TRUE I edited flow 1 (…
-
Will 'better flow management' also contain active search within flow-names, like you can do with devices? I have a naming-convention for my flows, so I can easily find all "EXE" (Execute) flows or "CHK" (Check) flows. This would help with my 50+ f…
-
Is there a way to convert a string received from a device into a number in BetterLogic? Example: a Fibaro Motion sensor also senses the luminance. It's value card (when luminance change) is a string, although containing only numbers. A BetterLogi…
-
I am interested in that too, I have the feeling I don't see all luminance updates.
-
Sorry for the delay in answering. I have -as the others have- the association to Homey on group 3 . Parameters is 80,1,17 ( but that is to change the light colour when there is movement, I mainly use it when changing something and making suring that…
-
Motion detection works. I have a flow that turns on a Hue light based on movement that is detected by the Fibaro motion sensor.
-
@Taco analysed the data and found that somehow not all parameters are sent/accepted, including the necessary 121 parameter. So when the door open/closed, the sensor still sends the Basic Set Frames instead of a Binary Set. During the wake-up, Homey…
-
MarcoWijk said: MarkVanDeVen said: @MarcoWijk Have you tried completely reinstalling (including resetting all settings) after installing v 0.8.20 ? For me, that did the trick. 433mhz is working again and i haven't had 'blocking' proble…
-
All times in Zulu: Sensor node ID: 5 Current parameters: 101,1,1;111,4,240;121,4,16;1,1,0 Closed = magnet on switch Open = magnet off switch doorsensor ‘closed’ 09:56 : reboot Homey 09:58 : generic alarm off ; as expec…
-
OK, Hopefully you can retest. I am curious to know if you experience the same issues. That might help @Taco in determining the cause of this bug. What I read on-line is that other platforms are supporting the sensor, so we should be able to get th…
-
"Still" not updated on my Homey ... ;-) In all seriousness; what is the frequency of app updates on my Homey? Does the 'update' setting have any impact on updating the apps or is that only for core HomeyOS ? And is there a way to force update an …
-
mruiter said: I have 5 of these door sensors. you can skip te part thats is broke because i tried it with multiple. Can you also confirm the status is updated when you press the 'z-wave button' inside the device? When I do that, status…
-
Taco said: In the logs I can see if there are Binary Reports being received but until I can take a look at them I'm not making statements. I do think the device isn't sending reports but I can't be certain yet. There might also be a bug when p…
-
@Taco , does this mean you are clainming the Gen5 sensor (door sensor) isn't sending its reports, only when I wake it up? I am pretty sure it is sending a report when the door is opened. During the initial interview, it will not use the binary fr…
-
There is a time-out in the Fibaro motion sensor itself before it re-reports a new motion. So you might need to fiddle with its internal parameters to get a more continuous motion detection. And then configure your flow to act when motion stops.
-
Taco said: We are aware of a bug where the settings aren't applied when you press save the first time after you've added the device. To workaround this bug enter any setting, press save, enter the setting you want to change/apply. You only have…
-
mruiter said: Taco said: We are aware of a bug where the settings aren't applied when you press save the first time after you've added the device. To workaround this bug enter any setting, press save, enter the setting you want to chan…
-
I've made some progress: * Parameters get synced when you manually wake up the device (1 push on the z-wave button) * When door is closed, and I manually sync the device by pushing the z-wave button, alarm goes off * When I open door, the device L…
-
Will you be supporting pure iCal URLs only or also (authenticated) CalDav servers? My CalDav server has multiple .ics files per calendar and creates new .ics files all the time (not sure what the logic behind this is). Apple's Calendar combines it …