This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
aloft
About
- Username
- aloft
- Joined
- Visits
- 48
- Last Active
- Roles
- Member
Comments
-
@gruijter_dev This coming period I plan to add this functionality, including a complete rewrite to SDK-2 . So it might take awhile, but it is planned ! https://github.com/ralfvd/nl.bevlogenheid.countdown/issues/14
-
Bob said: Hello, I am new to homey since a week and installed the count down timer today. Why is this flow not running. The lamp turns on, but never off. Keeps me busy all day Do you also have a flow that turns off the light when the …
-
@vaderag Version 1.2.5 has been released in the app store, let me know if this fixes your issue.
-
There seems to be a bug in 1.2.4 , which causes the 'adjust timer' action card to not execute in certain conditions. I have fixed this, and the app is pending approval in the app store. Sorry for all these introduced bugs these last couple of day…
-
@quakerix So far as I can see, the values are not lost, but cannot be seen in a flow. The flows still work, but you cannot edit the flow without inputting a value. That is definitely a bug which was introduced by enforcing more strict input valid…
-
brian085 said: Hi I Bought an Everspring SP814-1 Motion Detector after checking that it was already present in the list of Everspring devices, however it seems like the app/driver only exposes the motion detector to Homey - not the light sensor…
-
For the daring people: https://github.com/ralfvd/nl.bevlogenheid.countup ( very experimental ! ) ; feedback appreciated if this is a tool that warrants more serious development than basically changing '-1' to '+1' ;-)
-
Hi, author of CountDown here. It is not easy to change the CountDown app to count up, in its design each counter is counted down ;-) You could start indeed with a very high counter and then retrieve (with the global tags) the remaining seconds and…
-
Countdown 1.0.6 has been released. Added features: New 'adjust timer' action card : adjust a running timer ( increase or decrease value ) New 'stop all timers' action card: stop and reset all running timers
-
For those with multiple locations in Evohome, the current version doesn't support more than 1 location. But there is a workaround, which has been successfully tested by two Homey users. Please contact me and I can get you setup for this.
-
Evohome app has been updated to 1.0.4, which solves two issues: - Ignore a 128 degrees reading (this is sent by Evohome if the status of a thermostat is unknown - Better selection of thermostats, so it ignores e.g. a domestic hot water sensor
-
@arthur good to hear it has been resolved @TedTolboom Good tip, I've updated the ZwaveDriver to the latest version.
-
@arthur To summarize; you see detection in the device card, but it isn't triggering the flow? I am not sure this is within the Everspring app, as I just use the standard capabilities of homey to report the motion. Are you able to run the App via…
-
@btwvince App has been updated to 0.0.3 ; installation is now possible. Other features will come in the near future, development has been a bit slow due to lack of time.
-
@rebtor The version with the SF812 is now available as beta in the app store. Feedback if it works is appreciated, so I can promote it to stable as soon as possible.
-
@Rebtor thank you so much for this code. I don't have the SF812 myself. Can you explain more on the association part? In the SF812 manual online I read that they only support one association. That should be '1' then, right? I've combined the co…
-
0.1.9 version has been approved and is available in the app store
-
The issue with SP103 has been recognized; this was introduced in Everspring app version 0.1.8 ; This has been fixed in the GitHub version (0.1.9) and is awaiting approval from Athom.
-
madmax said: JBS said: Aeotec Z-Wave Plus ZW100-C Multi-Sensor 6 at https://www.amazon.de/dp/B0141FQDJQ/ only 33 euro. Mhh, Price is updated to 45,05 Euro I was lucky to order one for 33 EUR. Let's see if they honor the o…
-
@rdtimmer You are in luck; I've received a AN181 so I am able to have better support for this device. I added it, but in my case, the power metering seems to work: Can you explain in more detail what you see? Do you see the Power meter? Can you …
-
As I said, didn't have time yet to dive into it. One fibaro motion sensor stayed 'in motion' all night, causing a light not to turn off. A new motion and then wait a couple of minutes didn't help either. Reboot didn't help either. I had to remove a…
-
@G4nd41f I have the same feeling, but cannot confirm or reject that feeling just yet. Some Fibaro sensors stay on 'motion detected', sometimes. Didn't look into detail yet.
-
They do work, but the app is pretty limited at this time. I think you should wait for the 1.2.0 Media release to say anything useful on Homey and media in general, and then Sonos in particular.
-
ivoterhorst said: I've added the SP103 PIR motion sensor and created a flow to turn on lights when motion is detected. Most of the time, the lights stay off. In insights (see figure below) it looks like the sensor remains 'triggered' for hours …
-
@Phuturist where did you end up buying the Xiaomi Mi robot?
-
Menno said: @MatjaLipu request: enable / disable an app , Or reset a crashed app? Or as a intermediate step: have a detection when an app crashes.
-
Everspring 0.1.6 has been released today in the app store; there is clean-up of configuration possibilities for various devices and for the dimming-enabled sockets, dimming is now working again. Have fun and please consider buying me a glass of wh…
-
@AtHomey thanks for the kind words. Regarding the Fahrenheit vs Celcius : as far as I can see, the ST814 reports what is shown in the display. So if you set it to Fahrenheit in the display, it will also report the degrees in Fahrenheit to Homey. I…
-
@Yannick : https://github.com/athombv/homey/issues/934
-
@posthok, I tried it with an AD147 which was already paired, but also removed and paired it again with Homey 1.1.2 ; I don't see any issues: I can turn it on/off and set the dim level via the device card ( in a flow it is still not working, bug in …