This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
aloft
About
- Username
- aloft
- Joined
- Visits
- 48
- Last Active
- Roles
- Member
Comments
-
Which version of the multisensor do you have ? If I read the forums correctly, V2.7 works, but V3.2 doesn't work yet.
-
Mveldijk said: I have been trying to get the Fibaro multisensor working but i doesn't work in the flow. The sensor is added as device : But those numbers never change (well, the luminance changed one time when i restarted homey), and (probably…
-
Updated Github issue 387 https://github.com/athombv/homey/issues/387 with this info
-
Phuturist said: Just use an old skool time clock for this guys. Works like a charm. If I could predict when Homey becomes unfunctional, then the old skool time clock would certainly help. In its current state, it sometimes takes hours an…
-
PimBliek said: Here it all went without a glitch... Connected to my 2.4 GHz WiFi. Didn't detect my 5 GHz one though. Homey doesn't have a 5Ghz wifi chip. Which is too bad, as 5 Ghz is much more stable than the overcrowded 2.4Ghz spectr…
-
@Taco In addition to above error checking, I again removed the Z-wave device, rebooted the Homey and added the device again. No luck. Issue log: 931D2AE2FD Steps after reboot: - Add device as 3 sensors - Added group 1 - Manual sync via device Th…
-
GET https://homey-static.athom.com/manager/webserver/assets/font/roboto/roboto.css api.js:1 GET https://NNN.homey.athom.com/api/device/7b7fe6ba-2292-4e96-8fac-6f0fc9ecf48c/?_=1460038344351 500 (Internal Server Error) window.Homey.apiapi.js:1i.Hom…
-
No, it only shows temperature and battery level: (There is no horizontal scrolling) During interview , it finds 3 devices, one main device, the first sub-device shows temperature, the second sub-device is empty: in Z-wave settings:
-
Taco said: The humidity capability wasn't correctly assigned to devices by the driver due a bug in the Sensor Multilevel command class implementation. This affected all devices supporting the Sensor Multilevel Humidity sensor. I've tested this …
-
@Taco ; I raised issue 387 on github, which was closed with comment : fixed in 0.8.28. I am now running 0.8.29 and removed and added the ST-814 device. 5 hours in, but Humidity is still not reported yet, only battery & temperature. Can you sh…
-
WernerHellinghuizer said: @Taco and @mruiter and @aloft can you check if this fixes the problem? I need to do some more testing, due to the instability of Z-wave in 0.8.29 it is difficult to test, but first results seem to indicate that …
-
After a power-cycle reboot this morning my variables were back (at least the ones I re-entered). Now, after an uptime of 2-3 hours, the variables are gone again. I have BL 0.9.3 (upgraded via apps.athom.com) && 0.8.27 I only see this state…
-
Uranday said: Everyting is now read from storage instead of stored in memory. Is there any impact on performance and/or storage-life-expectancy due to this change?
-
Invite the Indians to the cafe!
-
Please also raise an issue on GitHub https://github.com/athombv/homey/issues so Athom can track all issues there.
-
GeurtDijker said: Same her, no new additions and update to .27. All variables ar gone... And I can't add new variables. Restarted and now I can Add them again, but all defined variables are gone. The variables that I re-added (for the m…
-
I lost all BetterLogic variables again, without installing SoundBoard or other changes to the system... So it is not related to SoundBoard.
-
In addition to not seeing variables, I also wasn't able to add variables. I un-installed the SoundBoard app, as that was another change I did after upgrading to 0.8.27 After a reboot I didn't see variables, but I could add new ones... The old ones a…
-
Hmm, last reboot didn't help. Variables are not shown and it seems the flows are not working. When using a card, it won't find the variables either. BetterLogic version: v0.9.2
-
With the upgrade to 0.8.27 I sometime lose the variable overview in the BetterLogic settings. It happened twice now. After a reboot of Homey they are back. Anyone else experiences this?
-
Phuturist said: My experiences thus far: * OK Homey trigger seems to work reasonably well, about the same as 0.8.24 since it already worked reasonably for me. Still seeying false positives though. * Oops I could not reach the server is still a…
-
Those features will greatly enhance my motion sensor flows, where I now need 7+ flows to get a light on or off for N seconds based on movement. Thanks!
-
TedTolboom said: aloft said: I am still having the issue Z-wave becoming unresponsive after N amount of hours. I now have to reboot (i.e. unplug the power and replug is, as a normal reboot is not working by then) every 24 hours. I kn…
-
I am still having the issue Z-wave becoming unresponsive after N amount of hours. I now have to reboot (i.e. unplug the power and replug is, as a normal reboot is not working by then) every 24 hours. I know this release is experimental, but it is …
-
TheoDeKoning said: @luccie_007 You can edit your post to overcome someone is making it Athom very difficult. For those who understand Dutch: https://www.security.nl/posting/455397/Juridische+vraag:+zijn+e-mailadressen+in+de+cc+een+dat…
-
RikPost said: Anyone else having problems with freezing Homey? After about 8 hours Homey stops working and only a power cycle will bring it back online. I will also try a full reset to see if that will solve this issue. I had to reboot t…
-
@Taco any update on this front? Last status I know that it seems that some parameters are not saved, sent or processed. I think (but not validated it yet to be certain) that I also see this behaviour with other Z-wave devices I have. I tried the …
-
PeterGroeneweg said: @ Taco, good to hear! How does the logging of values work like the lumination sensor of the multi sensor? Mine seems to record once in a few hours. Is it possible to put this to once a minute? For example I would like monit…
-
GeurtDijker said: Both sunrise didn't work this morning See , @aloft , Did your Sunrise Start execute? or don't you use that trigger? I only had a 'sunrise ends' trigger.
-
My "sunrise ends" flow didn't execute this morning. I will add extra flows to troubleshoot.