This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
aloft
About
- Username
- aloft
- Joined
- Visits
- 48
- Last Active
- Roles
- Member
Comments
-
In the Devices-tab, click on the text of the device tile, you can then edit the text.
-
@kasteleman Good news! Athom might have found the issue with memory leaks in applications. This will be embedded in an upcoming release. As soon as it is available, I'll stress-test the CountDown app ;-)
-
kasteleman said: @aloft: "(thousands of updates)"? how is that? If you start / stop many timers at the same time with each a high amount of 'seconds', you'll be able to crash the app. Every second that a timer runs is an update. So if…
-
JohanKuster said: So, can we let homey listen to itself? Throw in some deep learning and all problems are solved. 42 !
-
Version 0.0.4 has been released in the App store. - Optimized settings screen - Lower memory usage & CPU usage. This limits the impact on the memory leak for operational use, although in extreme cases (thousands of updates) you will still be a…
-
Fire69 said: aloft said: Fire69 said: Might I just say that I think it's pretty stupid to migrate all your devices at once to homey ? I only have about 15 devices right now, and migrated 3, just to test if it's stable... If…
-
Fire69 said: Might I just say that I think it's pretty stupid to migrate all your devices at once to homey ? I only have about 15 devices right now, and migrated 3, just to test if it's stable... If you really have that many devices that are…
-
CountDown v0.0.2 has been published. Any feedback is appreciated. One bug that is already encountered: there might be a small memory leak that will cause the app to crash over time, depending on the amount of timers and triggering of those timers. …
-
I have to say, in 0.8.30, as long as I change the Z-wave network ( adding / removing devices ), it is pretty stable. In previous versions, the network would become unresponsive after max 24 hours. Right now, that is not the case, it seems pretty sta…
-
Pending approval in the App Store, you could download the source from github , and install it via command line. E.g. on Unix-based systems: npm install -g athom-cli athom login athom project --instal /path/to/downloaded/source
-
MarcoWijk said: oddly enough, evrything is working here. Only needed to pair kaku switches again, not the sockets. Voicecontrol is working-ish but way better then before. posthok said: .... I find it very strange that some users ha…
-
- Z-wave works, but unreliably - Philips Hue lamps sometimes don't switch on/off ; not sure what causes that. - Garbage collection bug is not completely gone yet, losing variables (e.g. in BetterLogic) after x amount of updates to the variables - …
-
DaneeDeKruyff said: Well,.... Updated to 0.8.30. Not been able to pair a Multisensor since When I start the process and click the action button (once) the green lights flashes for a second, green solid for a second or 3 and than a blinking or…
-
- Variables seem more stable - Z-wave pairing: some devices pair instantly, one devices (so far) crashes in the interview stage ( where they paired withouth issue in 0.8.29 . Z-wave chip needs to be restarted afterwards. Log ID 1BDD13EE66 @Taco ; - …
-
DaneeDeKruyff said: But does it also support this? Movement detected timer 20 seconds (after 11 seconds) Movement dected reset timer to initial start (20 seconds) If after 11 seconds, movement is detected (triggered by a flow…
-
DaneeDeKruyff said: 101,1,1: low battery voltage check function 0/1 disable/enable default 0 121,1,256: Command to Associated Nodes 16/256/272 Binary/Basic/Both default 256 1,1,0: sensor binary report for magnet switch 0->open=00;close=ff/1-…
-
I have successfully added a second sensor (straight out of the box), with the following parameters: 101,1,1;121,1,256;1,1,0 It will immediately register open/close via the 'generic alarm'. You need to pair it close to Homey at first, otherwise …
-
jovink said: I like the idea! I hope it would be possible to start a timer if a door opens. so if longer a a minute that homey can set the thermostat to 15 degrees That's the exact use-case for this app. So then you need these flows wi…
-
Uranday said: I dont see a countdown timer as something for better logic for now. Not even sure if it is possible to do. There is a way of working around this that would work very nice I think. Create a flow that every second (or X seconds) f…
-
DaneeDeKruyff said: Well, it reports Temperature, Luminance and Movement when added non-secure. It's functional, but missing Humidity, UV and Vibration (the tamper alarm) so 3 down, 3 to go I'd say. Humidity is reported in https://gi…
-
I have the following parameters: 40,2,5;89,1,0;42,2,1800 40: ILLUMINATION REPORT THRESHOLD ; op 5 lumen 89 : Tamper alarm off 42: ILLUMINATION REPORTS INTERVAL, op 1800 seconden (every 30 minutes) I am not sure that parameter 40 is working cor…
-
Are you sure there is a change in lumen ? Because Insights will only record a new entry when there is a change between the reported value and the previously stored value. That makes it difficult to troubleshoot if reports are coming in. I have lu…
-
RobertLijkendijk said: I see what you mean, good point As I am planning on using motion sensors to switch on / off lights and set brightness off lights I also want to make use of some sort of solution you're after. I have a solution, b…
-
RobertLijkendijk said: You can already set a delay on the action cards in the flow manager @aloft Yes, but a delay is something else then a countdown timer. I cannot reset an action card with e.g. 60 seconds delay when a new motion is d…
-
One feature request, although I am not sure this should be in BetterLogic or in a separate app. A countdown timer. I use BetterLogic to turn off lights after X seconds of non-movement. My flows would be a lot easier if I could set a countdown timer …
-
Uranday said: I'm holding a bit off with updates till the bug is fixed. But if anyone has a feature request, please let me know and I'll try to implement it in the next update. Any update on the bugfixing? My flows heavily rely on the B…
-
I think the only way possible right now is manually set the dim levels with a delay in your movement-gone-flow. So first action card: 99 % dim. Then a second action card, with a second delay 98 %, then a third action acrd, with 2 second delay 97 %…
-
Fire69 said: aloft said: When you change settings, you must manually sync the device ( push the button 3 times ) to get the new group association, parameters etc synced to the sensor. Did you do that as well? Well, you don't ha…
-
So it works with Homey out of the box?
-
When you change settings, you must manually sync the device ( push the button 3 times ) to get the new group association, parameters etc synced to the sensor. Did you do that as well?